drivers/crypto/crypto_stm32.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2020 Markus Fuchs <markus.fuchs@de.sauter-bc.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #include <zephyr/init.h>
 #include <zephyr/kernel.h>
 #include <zephyr/device.h>
 #include <zephyr/sys/__assert.h>
 #include <zephyr/crypto/crypto.h>
 #include <zephyr/drivers/clock_control/stm32_clock_control.h>
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/sys/byteorder.h>
 #include <soc.h>

 #include "crypto_stm32_priv.h"

 #define LOG_LEVEL CONFIG_CRYPTO_LOG_LEVEL
 #include <zephyr/logging/log.h>
 LOG_MODULE_REGISTER(crypto_stm32);

 #if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_cryp)
 #define DT_DRV_COMPAT st_stm32_cryp
 #elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32_aes)
 #define DT_DRV_COMPAT st_stm32_aes
 #else
 #error No STM32 HW Crypto Accelerator in device tree
 #endif

 #define CRYP_SUPPORT (CAP_RAW_KEY | CAP_SEPARATE_IO_BUFS | CAP_SYNC_OPS | \
 		      CAP_NO_IV_PREFIX)
 #define BLOCK_LEN_BYTES 16
 #define BLOCK_LEN_WORDS (BLOCK_LEN_BYTES / sizeof(uint32_t))
 #define CRYPTO_MAX_SESSION CONFIG_CRYPTO_STM32_MAX_SESSION

 #if defined(CRYP_KEYSIZE_192B)
 #define STM32_CRYPTO_KEYSIZE_192B_SUPPORT
 #endif

 #if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_cryp)
 #define STM32_RCC_CRYPTO_FORCE_RESET    __HAL_RCC_CRYP_FORCE_RESET
 #define STM32_RCC_CRYPTO_RELEASE_RESET  __HAL_RCC_CRYP_RELEASE_RESET
 #define STM32_CRYPTO_TYPEDEF            CRYP_TypeDef
 #elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32_aes)
 #if defined(CONFIG_SOC_SERIES_STM32WBX)
 #define STM32_RCC_CRYPTO_FORCE_RESET    __HAL_RCC_AES1_FORCE_RESET
 #define STM32_RCC_CRYPTO_RELEASE_RESET  __HAL_RCC_AES1_RELEASE_RESET
 #else
 #define STM32_RCC_CRYPTO_FORCE_RESET    __HAL_RCC_AES_FORCE_RESET
 #define STM32_RCC_CRYPTO_RELEASE_RESET  __HAL_RCC_AES_RELEASE_RESET
 #endif
 #define STM32_CRYPTO_TYPEDEF            AES_TypeDef
 #endif

 struct crypto_stm32_session crypto_stm32_sessions[CRYPTO_MAX_SESSION];

 static int copy_reverse_words(uint8_t *dst_buf, int dst_len,
 			      const uint8_t *src_buf, int src_len)
 {
 	int i;

 	if ((dst_len < src_len) || ((dst_len % 4) != 0)) {
 		LOG_ERR("Buffer length error");
 		return -EINVAL;
 	}

 	memcpy(dst_buf, src_buf, src_len);
 	for (i = 0; i < dst_len; i += sizeof(uint32_t)) {
 		sys_mem_swap(&dst_buf[i], sizeof(uint32_t));
 	}

 	return 0;
 }

 static int do_encrypt(struct cipher_ctx *ctx, uint8_t *in_buf, int in_len,
 		      uint8_t *out_buf)
 {
 	HAL_StatusTypeDef status;

 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(ctx->device);
 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	k_sem_take(&data->device_sem, K_FOREVER);

 	status = HAL_CRYP_SetConfig(&data->hcryp, &session->config);
 	if (status != HAL_OK) {
 		LOG_ERR("Configuration error");
 		k_sem_give(&data->device_sem);
 		return -EIO;
 	}

 	status = HAL_CRYP_Encrypt(&data->hcryp, (uint32_t *)in_buf, in_len,
 				  (uint32_t *)out_buf, HAL_MAX_DELAY);
 	if (status != HAL_OK) {
 		LOG_ERR("Encryption error");
 		k_sem_give(&data->device_sem);
 		return -EIO;
 	}

 	k_sem_give(&data->device_sem);

 	return 0;
 }

 static int do_decrypt(struct cipher_ctx *ctx, uint8_t *in_buf, int in_len,
 		      uint8_t *out_buf)
 {
 	HAL_StatusTypeDef status;

 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(ctx->device);
 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	k_sem_take(&data->device_sem, K_FOREVER);

 	status = HAL_CRYP_SetConfig(&data->hcryp, &session->config);
 	if (status != HAL_OK) {
 		LOG_ERR("Configuration error");
 		k_sem_give(&data->device_sem);
 		return -EIO;
 	}

 	status = HAL_CRYP_Decrypt(&data->hcryp, (uint32_t *)in_buf, in_len,
 				  (uint32_t *)out_buf, HAL_MAX_DELAY);
 	if (status != HAL_OK) {
 		LOG_ERR("Decryption error");
 		k_sem_give(&data->device_sem);
 		return -EIO;
 	}

 	k_sem_give(&data->device_sem);

 	return 0;
 }

 static int crypto_stm32_ecb_encrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt)
 {
 	int ret;

 	/* For security reasons, ECB mode should not be used to encrypt
 	 * more than one block. Use CBC mode instead.
 	 */
 	if (pkt->in_len > 16) {
 		LOG_ERR("Cannot encrypt more than 1 block");
 		return -EINVAL;
 	}

 	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
 	if (ret == 0) {
 		pkt->out_len = 16;
 	}

 	return ret;
 }

 static int crypto_stm32_ecb_decrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt)
 {
 	int ret;

 	/* For security reasons, ECB mode should not be used to encrypt
 	 * more than one block. Use CBC mode instead.
 	 */
 	if (pkt->in_len > 16) {
 		LOG_ERR("Cannot encrypt more than 1 block");
 		return -EINVAL;
 	}

 	ret = do_decrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
 	if (ret == 0) {
 		pkt->out_len = 16;
 	}

 	return ret;
 }

 static int crypto_stm32_cbc_encrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt, uint8_t *iv)
 {
 	int ret;
 	uint32_t vec[BLOCK_LEN_WORDS];
 	int out_offset = 0;

 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	(void)copy_reverse_words((uint8_t *)vec, sizeof(vec), iv, BLOCK_LEN_BYTES);

 	session->config.pInitVect = vec;

 	if ((ctx->flags & CAP_NO_IV_PREFIX) == 0U) {
 		/* Prefix IV to ciphertext unless CAP_NO_IV_PREFIX is set. */
 		memcpy(pkt->out_buf, iv, 16);
 		out_offset = 16;
 	}

 	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len,
 			 pkt->out_buf + out_offset);
 	if (ret == 0) {
 		pkt->out_len = pkt->in_len + out_offset;
 	}

 	return ret;
 }

 static int crypto_stm32_cbc_decrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt, uint8_t *iv)
 {
 	int ret;
 	uint32_t vec[BLOCK_LEN_WORDS];
 	int in_offset = 0;

 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	(void)copy_reverse_words((uint8_t *)vec, sizeof(vec), iv, BLOCK_LEN_BYTES);

 	session->config.pInitVect = vec;

 	if ((ctx->flags & CAP_NO_IV_PREFIX) == 0U) {
 		in_offset = 16;
 	}

 	ret = do_decrypt(ctx, pkt->in_buf + in_offset, pkt->in_len,
 			 pkt->out_buf);
 	if (ret == 0) {
 		pkt->out_len = pkt->in_len - in_offset;
 	}

 	return ret;
 }

 static int crypto_stm32_ctr_encrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt, uint8_t *iv)
 {
 	int ret;
 	uint32_t ctr[BLOCK_LEN_WORDS] = {0};
 	int ivlen = ctx->keylen - (ctx->mode_params.ctr_info.ctr_len >> 3);

 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	if (copy_reverse_words((uint8_t *)ctr, sizeof(ctr), iv, ivlen) != 0) {
 		return -EIO;
 	}

 	session->config.pInitVect = ctr;

 	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
 	if (ret == 0) {
 		pkt->out_len = pkt->in_len;
 	}

 	return ret;
 }

 static int crypto_stm32_ctr_decrypt(struct cipher_ctx *ctx,
 				    struct cipher_pkt *pkt, uint8_t *iv)
 {
 	int ret;
 	uint32_t ctr[BLOCK_LEN_WORDS] = {0};
 	int ivlen = ctx->keylen - (ctx->mode_params.ctr_info.ctr_len >> 3);

 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	if (copy_reverse_words((uint8_t *)ctr, sizeof(ctr), iv, ivlen) != 0) {
 		return -EIO;
 	}

 	session->config.pInitVect = ctr;

 	ret = do_decrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
 	if (ret == 0) {
 		pkt->out_len = pkt->in_len;
 	}

 	return ret;
 }

 static int crypto_stm32_get_unused_session_index(const struct device *dev)
 {
 	int i;

 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);

 	k_sem_take(&data->session_sem, K_FOREVER);

 	for (i = 0; i < CRYPTO_MAX_SESSION; i++) {
 		if (!crypto_stm32_sessions[i].in_use) {
 			crypto_stm32_sessions[i].in_use = true;
 			k_sem_give(&data->session_sem);
 			return i;
 		}
 	}

 	k_sem_give(&data->session_sem);

 	return -1;
 }

 static int crypto_stm32_session_setup(const struct device *dev,
 				      struct cipher_ctx *ctx,
 				      enum cipher_algo algo,
 				      enum cipher_mode mode,
 				      enum cipher_op op_type)
 {
 	int ctx_idx, ret;
 	struct crypto_stm32_session *session;

 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);

 	if (ctx->flags & ~(CRYP_SUPPORT)) {
 		LOG_ERR("Unsupported flag");
 		return -EINVAL;
 	}

 	if (algo != CRYPTO_CIPHER_ALGO_AES) {
 		LOG_ERR("Unsupported algo");
 		return -EINVAL;
 	}

 	/* The CRYP peripheral supports the AES ECB, CBC, CTR, CCM and GCM
 	 * modes of operation, of which ECB, CBC, CTR and CCM are supported
 	 * through the crypto API. However, in CCM mode, although the STM32Cube
 	 * HAL driver follows the documentation (cf. RM0090, par. 23.3) by
 	 * padding incomplete input data blocks in software prior encryption,
 	 * incorrect authentication tags are returned for input data which is
 	 * not a multiple of 128 bits. Therefore, CCM mode is not supported by
 	 * this driver.
 	 */
 	if ((mode != CRYPTO_CIPHER_MODE_ECB) &&
 	    (mode != CRYPTO_CIPHER_MODE_CBC) &&
 	    (mode != CRYPTO_CIPHER_MODE_CTR)) {
 		LOG_ERR("Unsupported mode");
 		return -EINVAL;
 	}

 	/* The STM32F4 CRYP peripheral supports key sizes of 128, 192 and 256
 	 * bits.
 	 */
 	if ((ctx->keylen != 16U) &&
 #if defined(STM32_CRYPTO_KEYSIZE_192B_SUPPORT)
 	    (ctx->keylen != 24U) &&
 #endif
 	    (ctx->keylen != 32U)) {
 		LOG_ERR("%u key size is not supported", ctx->keylen);
 		return -EINVAL;
 	}

 	ctx_idx = crypto_stm32_get_unused_session_index(dev);
 	if (ctx_idx < 0) {
 		LOG_ERR("No free session for now");
 		return -ENOSPC;
 	}
 	session = &crypto_stm32_sessions[ctx_idx];
 	memset(&session->config, 0, sizeof(session->config));

 	if (data->hcryp.State == HAL_CRYP_STATE_RESET) {
 		if (HAL_CRYP_Init(&data->hcryp) != HAL_OK) {
 			LOG_ERR("Initialization error");
 			session->in_use = false;
 			return -EIO;
 		}
 	}

 	switch (ctx->keylen) {
 	case 16U:
 		session->config.KeySize = CRYP_KEYSIZE_128B;
 		break;
 #if defined(STM32_CRYPTO_KEYSIZE_192B_SUPPORT)
 	case 24U:
 		session->config.KeySize = CRYP_KEYSIZE_192B;
 		break;
 #endif
 	case 32U:
 		session->config.KeySize = CRYP_KEYSIZE_256B;
 		break;
 	}

 	if (op_type == CRYPTO_CIPHER_OP_ENCRYPT) {
 		switch (mode) {
 		case CRYPTO_CIPHER_MODE_ECB:
 			session->config.Algorithm = CRYP_AES_ECB;
 			ctx->ops.block_crypt_hndlr = crypto_stm32_ecb_encrypt;
 			break;
 		case CRYPTO_CIPHER_MODE_CBC:
 			session->config.Algorithm = CRYP_AES_CBC;
 			ctx->ops.cbc_crypt_hndlr = crypto_stm32_cbc_encrypt;
 			break;
 		case CRYPTO_CIPHER_MODE_CTR:
 			session->config.Algorithm = CRYP_AES_CTR;
 			ctx->ops.ctr_crypt_hndlr = crypto_stm32_ctr_encrypt;
 			break;
 		default:
 			break;
 		}
 	} else {
 		switch (mode) {
 		case CRYPTO_CIPHER_MODE_ECB:
 			session->config.Algorithm = CRYP_AES_ECB;
 			ctx->ops.block_crypt_hndlr = crypto_stm32_ecb_decrypt;
 			break;
 		case CRYPTO_CIPHER_MODE_CBC:
 			session->config.Algorithm = CRYP_AES_CBC;
 			ctx->ops.cbc_crypt_hndlr = crypto_stm32_cbc_decrypt;
 			break;
 		case CRYPTO_CIPHER_MODE_CTR:
 			session->config.Algorithm = CRYP_AES_CTR;
 			ctx->ops.ctr_crypt_hndlr = crypto_stm32_ctr_decrypt;
 			break;
 		default:
 			break;
 		}
 	}

 	ret = copy_reverse_words((uint8_t *)session->key, CRYPTO_STM32_AES_MAX_KEY_LEN,
 				 ctx->key.bit_stream, ctx->keylen);
 	if (ret != 0) {
 		return -EIO;
 	}

 	session->config.pKey = session->key;
 	session->config.DataType = CRYP_DATATYPE_8B;
 	session->config.DataWidthUnit = CRYP_DATAWIDTHUNIT_BYTE;

 	ctx->drv_sessn_state = session;
 	ctx->device = dev;

 	return 0;
 }

 static int crypto_stm32_session_free(const struct device *dev,
 				     struct cipher_ctx *ctx)
 {
 	int i;

 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);
 	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

 	session->in_use = false;

 	k_sem_take(&data->session_sem, K_FOREVER);

 	/* Disable peripheral only if there are no more active sessions. */
 	for (i = 0; i < CRYPTO_MAX_SESSION; i++) {
 		if (crypto_stm32_sessions[i].in_use) {
 			k_sem_give(&data->session_sem);
 			return 0;
 		}
 	}

 	/* Deinitialize and reset peripheral. */
 	if (HAL_CRYP_DeInit(&data->hcryp) != HAL_OK) {
 		LOG_ERR("Deinitialization error");
 		k_sem_give(&data->session_sem);
 		return -EIO;
 	}

 	STM32_RCC_CRYPTO_FORCE_RESET();
 	STM32_RCC_CRYPTO_RELEASE_RESET();

 	k_sem_give(&data->session_sem);

 	return 0;
 }

 static int crypto_stm32_query_caps(const struct device *dev)
 {
 	return CRYP_SUPPORT;
 }

 static int crypto_stm32_init(const struct device *dev)
 {
 	const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
 	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);
 	const struct crypto_stm32_config *cfg = CRYPTO_STM32_CFG(dev);

 	if (!device_is_ready(clk)) {
 		LOG_ERR("clock control device not ready");
 		return -ENODEV;
 	}

 	if (clock_control_on(clk, (clock_control_subsys_t)&cfg->pclken) != 0) {
 		LOG_ERR("clock op failed\n");
 		return -EIO;
 	}

 	k_sem_init(&data->device_sem, 1, 1);
 	k_sem_init(&data->session_sem, 1, 1);

 	if (HAL_CRYP_DeInit(&data->hcryp) != HAL_OK) {
 		LOG_ERR("Peripheral reset error");
 		return -EIO;
 	}

 	return 0;
 }

 static struct crypto_driver_api crypto_enc_funcs = {
 	.cipher_begin_session = crypto_stm32_session_setup,
 	.cipher_free_session = crypto_stm32_session_free,
 	.cipher_async_callback_set = NULL,
 	.query_hw_caps = crypto_stm32_query_caps,
 };

 static struct crypto_stm32_data crypto_stm32_dev_data = {
 	.hcryp = {
 		.Instance = (STM32_CRYPTO_TYPEDEF *)DT_INST_REG_ADDR(0),
 	}
 };

 static struct crypto_stm32_config crypto_stm32_dev_config = {
 	.pclken = {
 		.enr = DT_INST_CLOCKS_CELL(0, bits),
 		.bus = DT_INST_CLOCKS_CELL(0, bus)
 	}
 };

 DEVICE_DT_INST_DEFINE(0, crypto_stm32_init, NULL,
 		    &crypto_stm32_dev_data,
 		    &crypto_stm32_dev_config, POST_KERNEL,
 		    CONFIG_CRYPTO_INIT_PRIORITY, (void *)&crypto_enc_funcs);
	/*
	* Copyright (c) 2020 Markus Fuchs <markus.fuchs@de.sauter-bc.com>
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#include <zephyr/init.h>
	#include <zephyr/kernel.h>
	#include <zephyr/device.h>
	#include <zephyr/sys/__assert.h>
	#include <zephyr/crypto/crypto.h>
	#include <zephyr/drivers/clock_control/stm32_clock_control.h>
	#include <zephyr/drivers/clock_control.h>
	#include <zephyr/sys/byteorder.h>
	#include <soc.h>

	#include "crypto_stm32_priv.h"

	#define LOG_LEVEL CONFIG_CRYPTO_LOG_LEVEL
	#include <zephyr/logging/log.h>
	LOG_MODULE_REGISTER(crypto_stm32);

	#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_cryp)
	#define DT_DRV_COMPAT st_stm32_cryp
	#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32_aes)
	#define DT_DRV_COMPAT st_stm32_aes
	#else
	#error No STM32 HW Crypto Accelerator in device tree
	#endif

	#define CRYP_SUPPORT (CAP_RAW_KEY \| CAP_SEPARATE_IO_BUFS \| CAP_SYNC_OPS \| \
	CAP_NO_IV_PREFIX)
	#define BLOCK_LEN_BYTES 16
	#define BLOCK_LEN_WORDS (BLOCK_LEN_BYTES / sizeof(uint32_t))
	#define CRYPTO_MAX_SESSION CONFIG_CRYPTO_STM32_MAX_SESSION

	#if defined(CRYP_KEYSIZE_192B)
	#define STM32_CRYPTO_KEYSIZE_192B_SUPPORT
	#endif

	#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_cryp)
	#define STM32_RCC_CRYPTO_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
	#define STM32_RCC_CRYPTO_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
	#define STM32_CRYPTO_TYPEDEF CRYP_TypeDef
	#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32_aes)
	#if defined(CONFIG_SOC_SERIES_STM32WBX)
	#define STM32_RCC_CRYPTO_FORCE_RESET __HAL_RCC_AES1_FORCE_RESET
	#define STM32_RCC_CRYPTO_RELEASE_RESET __HAL_RCC_AES1_RELEASE_RESET
	#else
	#define STM32_RCC_CRYPTO_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
	#define STM32_RCC_CRYPTO_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
	#endif
	#define STM32_CRYPTO_TYPEDEF AES_TypeDef
	#endif

	struct crypto_stm32_session crypto_stm32_sessions[CRYPTO_MAX_SESSION];

	static int copy_reverse_words(uint8_t *dst_buf, int dst_len,
	const uint8_t *src_buf, int src_len)
	{
	int i;

	if ((dst_len < src_len) \|\| ((dst_len % 4) != 0)) {
	LOG_ERR("Buffer length error");
	return -EINVAL;
	}

	memcpy(dst_buf, src_buf, src_len);
	for (i = 0; i < dst_len; i += sizeof(uint32_t)) {
	sys_mem_swap(&dst_buf[i], sizeof(uint32_t));
	}

	return 0;
	}

	static int do_encrypt(struct cipher_ctx ctx, uint8_t in_buf, int in_len,
	uint8_t *out_buf)
	{
	HAL_StatusTypeDef status;

	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(ctx->device);
	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	k_sem_take(&data->device_sem, K_FOREVER);

	status = HAL_CRYP_SetConfig(&data->hcryp, &session->config);
	if (status != HAL_OK) {
	LOG_ERR("Configuration error");
	k_sem_give(&data->device_sem);
	return -EIO;
	}

	status = HAL_CRYP_Encrypt(&data->hcryp, (uint32_t *)in_buf, in_len,
	(uint32_t *)out_buf, HAL_MAX_DELAY);
	if (status != HAL_OK) {
	LOG_ERR("Encryption error");
	k_sem_give(&data->device_sem);
	return -EIO;
	}

	k_sem_give(&data->device_sem);

	return 0;
	}

	static int do_decrypt(struct cipher_ctx ctx, uint8_t in_buf, int in_len,
	uint8_t *out_buf)
	{
	HAL_StatusTypeDef status;

	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(ctx->device);
	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	k_sem_take(&data->device_sem, K_FOREVER);

	status = HAL_CRYP_SetConfig(&data->hcryp, &session->config);
	if (status != HAL_OK) {
	LOG_ERR("Configuration error");
	k_sem_give(&data->device_sem);
	return -EIO;
	}

	status = HAL_CRYP_Decrypt(&data->hcryp, (uint32_t *)in_buf, in_len,
	(uint32_t *)out_buf, HAL_MAX_DELAY);
	if (status != HAL_OK) {
	LOG_ERR("Decryption error");
	k_sem_give(&data->device_sem);
	return -EIO;
	}

	k_sem_give(&data->device_sem);

	return 0;
	}

	static int crypto_stm32_ecb_encrypt(struct cipher_ctx *ctx,
	struct cipher_pkt *pkt)
	{
	int ret;

	/* For security reasons, ECB mode should not be used to encrypt
	* more than one block. Use CBC mode instead.
	*/
	if (pkt->in_len > 16) {
	LOG_ERR("Cannot encrypt more than 1 block");
	return -EINVAL;
	}

	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
	if (ret == 0) {
	pkt->out_len = 16;
	}

	return ret;
	}

	static int crypto_stm32_ecb_decrypt(struct cipher_ctx *ctx,
	struct cipher_pkt *pkt)
	{
	int ret;

	/* For security reasons, ECB mode should not be used to encrypt
	* more than one block. Use CBC mode instead.
	*/
	if (pkt->in_len > 16) {
	LOG_ERR("Cannot encrypt more than 1 block");
	return -EINVAL;
	}

	ret = do_decrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
	if (ret == 0) {
	pkt->out_len = 16;
	}

	return ret;
	}

	static int crypto_stm32_cbc_encrypt(struct cipher_ctx *ctx,
	struct cipher_pkt pkt, uint8_t iv)
	{
	int ret;
	uint32_t vec[BLOCK_LEN_WORDS];
	int out_offset = 0;

	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	(void)copy_reverse_words((uint8_t *)vec, sizeof(vec), iv, BLOCK_LEN_BYTES);

	session->config.pInitVect = vec;

	if ((ctx->flags & CAP_NO_IV_PREFIX) == 0U) {
	/* Prefix IV to ciphertext unless CAP_NO_IV_PREFIX is set. */
	memcpy(pkt->out_buf, iv, 16);
	out_offset = 16;
	}

	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len,
	pkt->out_buf + out_offset);
	if (ret == 0) {
	pkt->out_len = pkt->in_len + out_offset;
	}

	return ret;
	}

	static int crypto_stm32_cbc_decrypt(struct cipher_ctx *ctx,
	struct cipher_pkt pkt, uint8_t iv)
	{
	int ret;
	uint32_t vec[BLOCK_LEN_WORDS];
	int in_offset = 0;

	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	(void)copy_reverse_words((uint8_t *)vec, sizeof(vec), iv, BLOCK_LEN_BYTES);

	session->config.pInitVect = vec;

	if ((ctx->flags & CAP_NO_IV_PREFIX) == 0U) {
	in_offset = 16;
	}

	ret = do_decrypt(ctx, pkt->in_buf + in_offset, pkt->in_len,
	pkt->out_buf);
	if (ret == 0) {
	pkt->out_len = pkt->in_len - in_offset;
	}

	return ret;
	}

	static int crypto_stm32_ctr_encrypt(struct cipher_ctx *ctx,
	struct cipher_pkt pkt, uint8_t iv)
	{
	int ret;
	uint32_t ctr[BLOCK_LEN_WORDS] = {0};
	int ivlen = ctx->keylen - (ctx->mode_params.ctr_info.ctr_len >> 3);

	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	if (copy_reverse_words((uint8_t *)ctr, sizeof(ctr), iv, ivlen) != 0) {
	return -EIO;
	}

	session->config.pInitVect = ctr;

	ret = do_encrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
	if (ret == 0) {
	pkt->out_len = pkt->in_len;
	}

	return ret;
	}

	static int crypto_stm32_ctr_decrypt(struct cipher_ctx *ctx,
	struct cipher_pkt pkt, uint8_t iv)
	{
	int ret;
	uint32_t ctr[BLOCK_LEN_WORDS] = {0};
	int ivlen = ctx->keylen - (ctx->mode_params.ctr_info.ctr_len >> 3);

	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	if (copy_reverse_words((uint8_t *)ctr, sizeof(ctr), iv, ivlen) != 0) {
	return -EIO;
	}

	session->config.pInitVect = ctr;

	ret = do_decrypt(ctx, pkt->in_buf, pkt->in_len, pkt->out_buf);
	if (ret == 0) {
	pkt->out_len = pkt->in_len;
	}

	return ret;
	}

	static int crypto_stm32_get_unused_session_index(const struct device *dev)
	{
	int i;

	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);

	k_sem_take(&data->session_sem, K_FOREVER);

	for (i = 0; i < CRYPTO_MAX_SESSION; i++) {
	if (!crypto_stm32_sessions[i].in_use) {
	crypto_stm32_sessions[i].in_use = true;
	k_sem_give(&data->session_sem);
	return i;
	}
	}

	k_sem_give(&data->session_sem);

	return -1;
	}

	static int crypto_stm32_session_setup(const struct device *dev,
	struct cipher_ctx *ctx,
	enum cipher_algo algo,
	enum cipher_mode mode,
	enum cipher_op op_type)
	{
	int ctx_idx, ret;
	struct crypto_stm32_session *session;

	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);

	if (ctx->flags & ~(CRYP_SUPPORT)) {
	LOG_ERR("Unsupported flag");
	return -EINVAL;
	}

	if (algo != CRYPTO_CIPHER_ALGO_AES) {
	LOG_ERR("Unsupported algo");
	return -EINVAL;
	}

	/* The CRYP peripheral supports the AES ECB, CBC, CTR, CCM and GCM
	* modes of operation, of which ECB, CBC, CTR and CCM are supported
	* through the crypto API. However, in CCM mode, although the STM32Cube
	* HAL driver follows the documentation (cf. RM0090, par. 23.3) by
	* padding incomplete input data blocks in software prior encryption,
	* incorrect authentication tags are returned for input data which is
	* not a multiple of 128 bits. Therefore, CCM mode is not supported by
	* this driver.
	*/
	if ((mode != CRYPTO_CIPHER_MODE_ECB) &&
	(mode != CRYPTO_CIPHER_MODE_CBC) &&
	(mode != CRYPTO_CIPHER_MODE_CTR)) {
	LOG_ERR("Unsupported mode");
	return -EINVAL;
	}

	/* The STM32F4 CRYP peripheral supports key sizes of 128, 192 and 256
	* bits.
	*/
	if ((ctx->keylen != 16U) &&
	#if defined(STM32_CRYPTO_KEYSIZE_192B_SUPPORT)
	(ctx->keylen != 24U) &&
	#endif
	(ctx->keylen != 32U)) {
	LOG_ERR("%u key size is not supported", ctx->keylen);
	return -EINVAL;
	}

	ctx_idx = crypto_stm32_get_unused_session_index(dev);
	if (ctx_idx < 0) {
	LOG_ERR("No free session for now");
	return -ENOSPC;
	}
	session = &crypto_stm32_sessions[ctx_idx];
	memset(&session->config, 0, sizeof(session->config));

	if (data->hcryp.State == HAL_CRYP_STATE_RESET) {
	if (HAL_CRYP_Init(&data->hcryp) != HAL_OK) {
	LOG_ERR("Initialization error");
	session->in_use = false;
	return -EIO;
	}
	}

	switch (ctx->keylen) {
	case 16U:
	session->config.KeySize = CRYP_KEYSIZE_128B;
	break;
	#if defined(STM32_CRYPTO_KEYSIZE_192B_SUPPORT)
	case 24U:
	session->config.KeySize = CRYP_KEYSIZE_192B;
	break;
	#endif
	case 32U:
	session->config.KeySize = CRYP_KEYSIZE_256B;
	break;
	}

	if (op_type == CRYPTO_CIPHER_OP_ENCRYPT) {
	switch (mode) {
	case CRYPTO_CIPHER_MODE_ECB:
	session->config.Algorithm = CRYP_AES_ECB;
	ctx->ops.block_crypt_hndlr = crypto_stm32_ecb_encrypt;
	break;
	case CRYPTO_CIPHER_MODE_CBC:
	session->config.Algorithm = CRYP_AES_CBC;
	ctx->ops.cbc_crypt_hndlr = crypto_stm32_cbc_encrypt;
	break;
	case CRYPTO_CIPHER_MODE_CTR:
	session->config.Algorithm = CRYP_AES_CTR;
	ctx->ops.ctr_crypt_hndlr = crypto_stm32_ctr_encrypt;
	break;
	default:
	break;
	}
	} else {
	switch (mode) {
	case CRYPTO_CIPHER_MODE_ECB:
	session->config.Algorithm = CRYP_AES_ECB;
	ctx->ops.block_crypt_hndlr = crypto_stm32_ecb_decrypt;
	break;
	case CRYPTO_CIPHER_MODE_CBC:
	session->config.Algorithm = CRYP_AES_CBC;
	ctx->ops.cbc_crypt_hndlr = crypto_stm32_cbc_decrypt;
	break;
	case CRYPTO_CIPHER_MODE_CTR:
	session->config.Algorithm = CRYP_AES_CTR;
	ctx->ops.ctr_crypt_hndlr = crypto_stm32_ctr_decrypt;
	break;
	default:
	break;
	}
	}

	ret = copy_reverse_words((uint8_t *)session->key, CRYPTO_STM32_AES_MAX_KEY_LEN,
	ctx->key.bit_stream, ctx->keylen);
	if (ret != 0) {
	return -EIO;
	}

	session->config.pKey = session->key;
	session->config.DataType = CRYP_DATATYPE_8B;
	session->config.DataWidthUnit = CRYP_DATAWIDTHUNIT_BYTE;

	ctx->drv_sessn_state = session;
	ctx->device = dev;

	return 0;
	}

	static int crypto_stm32_session_free(const struct device *dev,
	struct cipher_ctx *ctx)
	{
	int i;

	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);
	struct crypto_stm32_session *session = CRYPTO_STM32_SESSN(ctx);

	session->in_use = false;

	k_sem_take(&data->session_sem, K_FOREVER);

	/* Disable peripheral only if there are no more active sessions. */
	for (i = 0; i < CRYPTO_MAX_SESSION; i++) {
	if (crypto_stm32_sessions[i].in_use) {
	k_sem_give(&data->session_sem);
	return 0;
	}
	}

	/* Deinitialize and reset peripheral. */
	if (HAL_CRYP_DeInit(&data->hcryp) != HAL_OK) {
	LOG_ERR("Deinitialization error");
	k_sem_give(&data->session_sem);
	return -EIO;
	}

	STM32_RCC_CRYPTO_FORCE_RESET();
	STM32_RCC_CRYPTO_RELEASE_RESET();

	k_sem_give(&data->session_sem);

	return 0;
	}

	static int crypto_stm32_query_caps(const struct device *dev)
	{
	return CRYP_SUPPORT;
	}

	static int crypto_stm32_init(const struct device *dev)
	{
	const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
	struct crypto_stm32_data *data = CRYPTO_STM32_DATA(dev);
	const struct crypto_stm32_config *cfg = CRYPTO_STM32_CFG(dev);

	if (!device_is_ready(clk)) {
	LOG_ERR("clock control device not ready");
	return -ENODEV;
	}

	if (clock_control_on(clk, (clock_control_subsys_t)&cfg->pclken) != 0) {
	LOG_ERR("clock op failed\n");
	return -EIO;
	}

	k_sem_init(&data->device_sem, 1, 1);
	k_sem_init(&data->session_sem, 1, 1);

	if (HAL_CRYP_DeInit(&data->hcryp) != HAL_OK) {
	LOG_ERR("Peripheral reset error");
	return -EIO;
	}

	return 0;
	}

	static struct crypto_driver_api crypto_enc_funcs = {
	.cipher_begin_session = crypto_stm32_session_setup,
	.cipher_free_session = crypto_stm32_session_free,
	.cipher_async_callback_set = NULL,
	.query_hw_caps = crypto_stm32_query_caps,
	};

	static struct crypto_stm32_data crypto_stm32_dev_data = {
	.hcryp = {
	.Instance = (STM32_CRYPTO_TYPEDEF *)DT_INST_REG_ADDR(0),
	}
	};

	static struct crypto_stm32_config crypto_stm32_dev_config = {
	.pclken = {
	.enr = DT_INST_CLOCKS_CELL(0, bits),
	.bus = DT_INST_CLOCKS_CELL(0, bus)
	}
	};

	DEVICE_DT_INST_DEFINE(0, crypto_stm32_init, NULL,
	&crypto_stm32_dev_data,
	&crypto_stm32_dev_config, POST_KERNEL,
	CONFIG_CRYPTO_INIT_PRIORITY, (void *)&crypto_enc_funcs);