The purpose of this test is to validate basic UART driver functions, | |
that are not tested elsewhere. | |
UART interrupt mode is used for the tests purpose. | |
Hardware setup required for these tests: | |
For single uart conviguration - UART0 TX connected to RX and CTS to RTS | |
For dual uart configuratiom - UART0 and UART1 TXs and RXs cross-connected | |
These test cases cover: | |
- UART configuration, | |
- UART error check, | |
- UART callback setup, | |
- Dual UART transmission with matched and mismatched configurations |