dts/arm/nxp/nxp_lpc55S0x_common.dtsi

/*
 * Copyright (c) 2022 metraTec
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv8-m.dtsi>
#include <zephyr/dt-bindings/clock/mcux_lpc_syscon_clock.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <mem.h>
#include <zephyr/dt-bindings/reset/nxp_syscon_reset_common.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "arm,cortex-m33f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv8m-mpu";
				reg = <0xe000ed90 0x40>;
			};
		};
	};
};

&sram {
	#address-cells = <1>;
	#size-cells = <1>;

	/* lpc55_0x Memory configurations:
	 *
	 * LPC5502:  RAMX: 16K, SRAM0: 32K
	 * LPC55x04: RAMX: 16K, SRAM0: 32K, SRAM1: 16K
	 * LPC55x06: RAMX: 16K, SRAM0: 32K, SRAM1: 16K, SRAM2: 16K, SRAM3: 16k
	 */
	sramx: memory@4000000 {
		compatible = "mmio-sram";
		reg = <0x04000000 DT_SIZE_K(16)>;
	};
	sram0: memory@20000000 {
		compatible = "mmio-sram";
		reg = <0x20000000 DT_SIZE_K(32)>;
	};
	sram1: memory@20008000 {
		compatible = "mmio-sram";
		reg = <0x20008000 DT_SIZE_K(16)>;
	};
	sram2: memory@2000C000 {
		compatible = "mmio-sram";
		reg = <0x2000C000 DT_SIZE_K(16)>;
	};
	sram3: memory@20010000 {
		compatible = "mmio-sram";
		reg = <0x20010000 DT_SIZE_K(16)>;
	};
};

&peripheral {
	#address-cells = <1>;
	#size-cells = <1>;

	syscon: syscon@0 {
		compatible = "nxp,lpc-syscon";
		reg = <0x0 0x4000>;
		#clock-cells = <1>;
		reset: reset {
			compatible = "nxp,lpc-syscon-reset";
			#reset-cells = <1>;
		};
	};

	iap: flash-controller@34000 {
		compatible = "nxp,iap-fmc55";
		reg = <0x34000 0x18>;
		status = "disabled";
		#address-cells = <1>;
		#size-cells = <1>;

		flash0: flash@0 {
			compatible = "soc-nv-flash";
			reg = <0x0 DT_SIZE_K(246)>;
			erase-block-size = <512>;
			write-block-size = <512>;
		};

		flash_reserved: flash@3d800 {
			compatible = "soc-nv-flash";
			reg = <0x0003d800 DT_SIZE_K(10)>;
			status = "disabled";
		};

		uuid: flash@3fc70 {
			compatible = "nxp,lpc-uid";
			reg = <0x3fc70 0x10>;
		};

		boot_rom: flash@3000000 {
			compatible = "soc-nv-flash";
			reg = <0x3000000 DT_SIZE_K(128)>;
		};
	};

	iocon: iocon@1000 {
		compatible = "nxp,lpc-iocon";
		reg = <0x1000 0x100>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x1000 0x100>;
		pinctrl: pinctrl {
			compatible = "nxp,lpc-iocon-pinctrl";
		};
	};

	gpio: gpio@8c000 {
		compatible = "nxp,lpc-gpio";
		reg = <0x8c000 0x2488>;
		#address-cells = <1>;
		#size-cells = <0>;
		gpio0: gpio@0 {
			compatible = "nxp,lpc-gpio-port";
			int-source = "pint";
			gpio-controller;
			#gpio-cells = <2>;
			reg = <0>;
		};

		gpio1: gpio@1 {
			compatible = "nxp,lpc-gpio-port";
			int-source = "pint";
			gpio-controller;
			#gpio-cells = <2>;
			reg = <1>;
		};
	};

	pint: pint@4000 {
		compatible = "nxp,pint";
		reg = <0x4000 0x1000>;
		interrupt-controller;
		#interrupt-cells = <1>;
		#address-cells = <0>;
		interrupts = <4 2>, <5 2>, <6 2>, <7 2>,
			<32 2>, <33 2>, <34 2>, <35 2>;
		num-lines = <8>;
		num-inputs = <64>;
	};

	flexcomm0: flexcomm@86000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x86000 0x1000>;
		interrupts = <14 0>;
		clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 11)>;
		status = "disabled";
	};

	flexcomm1: flexcomm@87000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x87000 0x1000>;
		interrupts = <15 0>;
		clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 12)>;
		status = "disabled";
	};

	flexcomm2: flexcomm@88000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x88000 0x1000>;
		interrupts = <16 0>;
		clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 13)>;
		status = "disabled";
	};

	flexcomm3: flexcomm@89000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x89000 0x1000>;
		interrupts = <17 0>;
		clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 14)>;
		status = "disabled";
	};

	flexcomm4: flexcomm@8a000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x8a000 0x1000>;
		interrupts = <18 0>;
		clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 15)>;
		status = "disabled";
	};

	flexcomm5: flexcomm@96000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x96000 0x1000>;
		interrupts = <19 0>;
		clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 16)>;
		status = "disabled";
	};

	flexcomm6: flexcomm@97000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x97000 0x1000>;
		interrupts = <20 0>;
		clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 17)>;
		status = "disabled";
	};

	flexcomm7: flexcomm@98000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x98000 0x1000>;
		interrupts = <21 0>;
		clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 18)>;
		status = "disabled";
	};

	hs_lspi: spi@9f000 {
		compatible = "nxp,lpc-spi";
		reg = <0x9f000 0x1000>;
		interrupts = <59 0>;
		clocks = <&syscon MCUX_HS_SPI_CLK>;
		resets = <&reset NXP_SYSCON_RESET(2, 28)>;
		status = "disabled";
		#address-cells = <1>;
		#size-cells = <0>;
	};

	can0: can@9d000 {
		compatible = "nxp,lpc-mcan";
		reg = <0x9d000 0x1000>;
		interrupts = <43 0>, <44 0>;
		interrupt-names = "int0", "int1";
		clocks = <&syscon MCUX_MCAN_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 7)>;
		bosch,mram-cfg = <0x0 15 15 8 8 0 15 15>;
		status = "disabled";
	};

	rng: rng@3a000 {
		compatible = "nxp,lpc-rng";
		reg = <0x3a000 0x1000>;
		status = "okay";
	};
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};