| /* |
| * Copyright 2023-2024 NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv7-m.dtsi> |
| #include <mem.h> |
| #include <zephyr/dt-bindings/clock/nxp_s32k344_clock.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m7"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m7"; |
| reg = <1>; |
| }; |
| |
| mpu: mpu@e000ed90 { |
| compatible = "arm,armv7m-mpu"; |
| reg = <0xe000ed90 0x40>; |
| }; |
| }; |
| |
| /* Dummy pinctrl node, filled with pin mux options at board level */ |
| pinctrl: pinctrl { |
| compatible = "nxp,s32k3-pinctrl"; |
| status = "okay"; |
| }; |
| |
| soc { |
| interrupt-parent = <&nvic>; |
| |
| itcm: memory@0 { |
| compatible = "zephyr,memory-region", "arm,itcm"; |
| reg = <0x00000000 DT_SIZE_K(64)>; |
| zephyr,memory-region = "ITCM"; |
| }; |
| |
| dtcm: memory@20000000 { |
| compatible = "zephyr,memory-region", "arm,dtcm"; |
| reg = <0x20000000 DT_SIZE_K(128)>; |
| zephyr,memory-region = "DTCM"; |
| }; |
| |
| sram0_1: sram0_1@20400000 { |
| compatible = "mmio-sram"; |
| reg = <0x20400000 DT_SIZE_K(320)>; |
| }; |
| |
| /* |
| * Last 48Kb is reserved by Secure BAF, application core cannot access it. |
| * |
| * Do not assign the compatible for this now, when Flash API is implemented, |
| * need to check if "soc-nv-flash" can be used or a new binding need to be |
| * created, based on it. |
| */ |
| flash0: flash@400000 { |
| reg = <0x00400000 DT_SIZE_K(4048)>; |
| status = "disabled"; |
| }; |
| |
| clock: clock-controller@402c8000 { |
| compatible = "nxp,s32-clock"; |
| reg = <0x402c8000 0x4000>, |
| <0x402cc000 0x4000>, |
| <0x402d0000 0x4000>, |
| <0x402d4000 0x4000>, |
| <0x402d8000 0x4000>, |
| <0x402e0000 0x4000>; |
| #clock-cells = <1>; |
| status = "okay"; |
| }; |
| |
| siul2_0: siul2@40290000 { |
| reg = <0x40290000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| eirq0: eirq@40290010 { |
| compatible = "nxp,s32-siul2-eirq"; |
| reg = <0x40290010 0xb4>; |
| interrupts = <53 0>, <54 0>, <55 0>, <56 0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| gpioa_l: gpio@40291702 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291702 0x02>, <0x40290240 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 0>, <1 1>, <2 2>, <3 3>, <4 4>, |
| <5 5>, <6 6>, <7 7>, <8 16>, <9 17>, |
| <10 18>, <11 19>, <12 20>, <13 21>, |
| <14 22>, <15 23>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <1 9>, <2 4>, <6 19>, |
| <8 27>, <9 25>, <13 8>, <15 24>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpioa_h: gpio@40291700 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291700 0x02>, <0x40290280 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 4>, <2 0>, <3 1>, <4 2>, |
| <5 3>, <9 5>, <12 6>, <14 7>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 35>, <4 63>, <9 38>, |
| <10 39>, <14 41>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiob_l: gpio@40291706 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291706 0x02>, <0x402902c0 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 8>, <1 9>, <2 10>, <3 11>, <4 12>, |
| <5 13>, <8 14>, <9 15>, <10 24>, <11 25>, |
| <12 26>, <13 27>, <14 28>, <15 29>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 11>, <2 12>, <8 29>, |
| <9 21>, <11 20>, <12 16>, <13 15>, <15 37>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| gpio-reserved-ranges = <6 2>; |
| status = "disabled"; |
| }; |
| |
| gpiob_h: gpio@40291704 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291704 0x02>, <0x40290300 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 30>, <1 31>, <5 8>, <6 9>, <7 10>, |
| <8 11>, <9 12>, <10 13>, <12 14>, <15 15>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 17>, <1 18>, <3 42>, |
| <5 43>, <7 44>, <10 45>, <12 46>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpioc_l: gpio@4029170a { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x4029170a 0x02>, <0x40290340 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 1>, <1 1>, <2 2>, <3 3>, <4 4>, |
| <5 5>, <6 6>, <7 7>, <8 16>, <9 17>, |
| <10 18>, <11 19>, <12 20>, <13 21>, |
| <14 22>, <15 23>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <6 7>, <7 6>, <9 14>, <11 22>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpioc_h: gpio@40291708 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291708 0x02>, <0x40290380 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <4 16>, <5 17>, <7 18>, <8 19>, |
| <9 20>, <10 21>, <11 22>, <13 23>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <2 40>, <4 47>, <7 48>, |
| <8 50>, <9 49>, <10 52>, <13 51>, <15 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiod_l: gpio@4029170e { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x4029170e 0x02>, <0x402903c0 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 8>, <1 9>, <2 10>, <3 11>, <4 12>, |
| <5 13>, <6 14>, <7 15>, <8 24>, |
| <9 25>, <10 26>, <11 27>, <12 28>, |
| <13 29>, <14 30>, <15 31>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 10>, <2 13>, <3 5>, |
| <4 26>, <13 28>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiod_h: gpio@4029170c { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x4029170c 0x02>, <0x40290400 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <1 24>, <4 25>, <5 26>, <6 27>, |
| <7 28>, <8 29>, <11 30>, <12 31>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <4 58>, <7 54>, <11 55>, |
| <13 56>, <15 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpioe_l: gpio@40291712 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291712 0x02>, <0x40290440 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 0>, <1 1>, <2 2>, <3 3>, |
| <4 4>, <5 5>, <6 6>, <8 7>, |
| <9 8>, <10 9>, <11 10>, <12 11>, |
| <13 12>, <14 13>, <15 14>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 30>, <2 31>, <5 36>, |
| <6 33>, <11 32>, <14 34>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpioe_h: gpio@40291710 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291710 0x02>, <0x40290480 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 15>; |
| nxp,wkpu = <&wkpu>; |
| nxp,wkpu-interrupts = <0 23>, <2 59>, <5 60>, |
| <7 61>, <9 62>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiof_l: gpio@40291716 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291716 0x02>, <0x402904c0 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 0>, <1 1>, <2 2>, <3 3>, |
| <4 4>, <5 5>, <6 6>, <7 7>, |
| <8 16>, <9 17>, <10 18>, <11 19>, |
| <12 20>, <13 21>, <14 22>, <15 23>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiof_h: gpio@40291714 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291714 0x02>, <0x40290500 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiog_l: gpio@4029171a { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x4029171a 0x02>, <0x40290540 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| interrupt-parent = <&eirq0>; |
| interrupts = <0 8>, <1 9>, <2 10>, <3 11>, |
| <4 12>, <5 13>, <6 14>, <7 15>, |
| <8 24>, <9 25>, <10 26>, <11 27>, |
| <12 28>, <13 29>, <14 30>, <15 31>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| |
| gpiog_h: gpio@40291718 { |
| compatible = "nxp,s32-gpio"; |
| reg = <0x40291718 0x02>, <0x40290580 0x40>; |
| reg-names = "pgpdo", "mscr"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| wkpu: wkpu@402b4000 { |
| compatible = "nxp,s32-wkpu"; |
| reg = <0x402b4000 0x4000>; |
| interrupts = <83 0>; |
| status = "disabled"; |
| }; |
| |
| lpuart0: uart@40328000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40328000 0x4000>; |
| interrupts = <141 0>; |
| clocks = <&clock NXP_S32_LPUART0_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart1: uart@4032c000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x4032c000 0x4000>; |
| interrupts = <142 0>; |
| clocks = <&clock NXP_S32_LPUART1_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart2: uart@40330000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40330000 0x4000>; |
| interrupts = <143 0>; |
| clocks = <&clock NXP_S32_LPUART2_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart3: uart@40334000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40334000 0x4000>; |
| interrupts = <144 0>; |
| clocks = <&clock NXP_S32_LPUART3_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart4: uart@40338000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40338000 0x4000>; |
| interrupts = <145 0>; |
| clocks = <&clock NXP_S32_LPUART4_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart5: uart@4033c000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x4033c000 0x4000>; |
| interrupts = <146 0>; |
| clocks = <&clock NXP_S32_LPUART5_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart6: uart@40340000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40340000 0x4000>; |
| interrupts = <147 0>; |
| clocks = <&clock NXP_S32_LPUART6_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart7: uart@40344000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40344000 0x4000>; |
| interrupts = <148 0>; |
| clocks = <&clock NXP_S32_LPUART7_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart8: uart@4048c000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x4048c000 0x4000>; |
| interrupts = <149 0>; |
| clocks = <&clock NXP_S32_LPUART8_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart9: uart@40490000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40490000 0x4000>; |
| interrupts = <150 0>; |
| clocks = <&clock NXP_S32_LPUART9_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart10: uart@40494000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40494000 0x4000>; |
| interrupts = <151 0>; |
| clocks = <&clock NXP_S32_LPUART10_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart11: uart@40498000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x40498000 0x4000>; |
| interrupts = <152 0>; |
| clocks = <&clock NXP_S32_LPUART11_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart12: uart@4049c000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x4049c000 0x4000>; |
| interrupts = <153 0>; |
| clocks = <&clock NXP_S32_LPUART12_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart13: uart@404a0000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x404a0000 0x4000>; |
| interrupts = <154 0>; |
| clocks = <&clock NXP_S32_LPUART13_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart14: uart@404a4000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x404a4000 0x4000>; |
| interrupts = <155 0>; |
| clocks = <&clock NXP_S32_LPUART14_CLK>; |
| status = "disabled"; |
| }; |
| |
| lpuart15: uart@404a8000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x404a8000 0x4000>; |
| interrupts = <156 0>; |
| clocks = <&clock NXP_S32_LPUART15_CLK>; |
| status = "disabled"; |
| }; |
| |
| qspi0: qspi@404cc000 { |
| compatible = "nxp,s32-qspi"; |
| reg = <0x404cc000 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| flexcan0: can@40304000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x40304000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANA_CLK>; |
| clk-source = <0>; |
| interrupts = <109 0>, <110 0>, <111 0>, <112 0>; |
| interrupt-names = "ored", "ored_0_31_mb", |
| "ored_32_63_mb", "ored_64_95_mb"; |
| status = "disabled"; |
| }; |
| |
| flexcan1: can@40308000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x40308000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANA_CLK>; |
| clk-source = <0>; |
| interrupts = <113 0>, <114 0>, <115 0>; |
| interrupt-names = "ored", "ored_0_31_mb", "ored_32_63_mb"; |
| status = "disabled"; |
| }; |
| |
| flexcan2: can@4030c000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x4030c000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANA_CLK>; |
| clk-source = <0>; |
| interrupts = <116 0>, <117 0>, <118 0>; |
| interrupt-names = "ored", "ored_0_31_mb", "ored_32_63_mb"; |
| status = "disabled"; |
| }; |
| |
| flexcan3: can@40310000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x40310000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANB_CLK>; |
| clk-source = <0>; |
| interrupts = <119 0>, <120 0>; |
| interrupt-names = "ored", "ored_0_31_mb"; |
| status = "disabled"; |
| }; |
| |
| flexcan4: can@40314000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x40314000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANB_CLK>; |
| clk-source = <0>; |
| interrupts = <121 0>, <122 0>; |
| interrupt-names = "ored", "ored_0_31_mb"; |
| status = "disabled"; |
| }; |
| |
| flexcan5: can@40318000 { |
| compatible = "nxp,flexcan-fd", "nxp,flexcan"; |
| reg = <0x40318000 0x4000>; |
| clocks = <&clock NXP_S32_FLEXCANB_CLK>; |
| clk-source = <0>; |
| interrupts = <123 0>, <124 0>; |
| interrupt-names = "ored", "ored_0_31_mb"; |
| status = "disabled"; |
| }; |
| |
| lpi2c0: i2c@40350000 { |
| compatible = "nxp,imx-lpi2c"; |
| reg = <0x40350000 0x10000>; |
| clocks = <&clock NXP_S32_LPI2C0_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <161 0>; |
| status = "disabled"; |
| }; |
| |
| lpi2c1: i2c@40354000 { |
| compatible = "nxp,imx-lpi2c"; |
| reg = <0x40354000 0x10000>; |
| clocks = <&clock NXP_S32_LPI2C1_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <162 0>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@400a0000 { |
| compatible = "nxp,s32-adc-sar"; |
| reg = <0x400a0000 0x1000>; |
| interrupts = <180 0>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| adc1: adc@400a4000 { |
| compatible = "nxp,s32-adc-sar"; |
| reg = <0x400a4000 0x1000>; |
| interrupts = <181 0>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| adc2: adc@400a8000 { |
| compatible = "nxp,s32-adc-sar"; |
| reg = <0x400a8000 0x1000>; |
| interrupts = <182 0>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| lpspi0: spi@40358000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x40358000 0x4000>; |
| interrupts = <165 0>; |
| clocks = <&clock NXP_S32_LPSPI0_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi1: spi@4035c000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x4035c000 0x4000>; |
| interrupts = <166 0>; |
| clocks = <&clock NXP_S32_LPSPI1_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi2: spi@40360000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x40360000 0x4000>; |
| interrupts = <167 0>; |
| clocks = <&clock NXP_S32_LPSPI2_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi3: spi@40364000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x40364000 0x4000>; |
| interrupts = <168 0>; |
| clocks = <&clock NXP_S32_LPSPI3_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi4: spi@404bc000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x404bc000 0x4000>; |
| interrupts = <169 0>; |
| clocks = <&clock NXP_S32_LPSPI4_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpspi5: spi@404c0000 { |
| compatible = "nxp,imx-lpspi"; |
| reg = <0x404c0000 0x4000>; |
| interrupts = <170 0>; |
| clocks = <&clock NXP_S32_LPSPI5_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| emac0: ethernet@40480000 { |
| reg = <0x40480000 0x4000>; |
| compatible = "nxp,s32-gmac"; |
| interrupts = <105 0>, <106 0>, <107 0>, <108 0>; |
| interrupt-names = "common", "tx", "rx", "safety"; |
| status = "disabled"; |
| }; |
| |
| mdio0: mdio@40480200 { |
| reg = <0x40480200 0x8>; |
| compatible = "nxp,s32-gmac-mdio"; |
| clocks = <&clock NXP_S32_AIPS_PLAT_CLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| edma0: dma-controller@4020c000 { |
| compatible = "nxp,mcux-edma"; |
| nxp,version = <3>; |
| reg = <0x4020c000 0x3000>, <0x40280000 0x4000>, <0x40284000 0x4000>; |
| dma-channels = <32>; |
| dma-requests = <64>; |
| dmamux-reg-offset = <3>; |
| channel-gap = <12 127>; |
| #dma-cells = <2>; |
| nxp,mem2mem; |
| interrupts = <4 0>, <5 0>, <6 0>, <7 0>, |
| <8 0>, <9 0>, <10 0>, <11 0>, |
| <12 0>, <13 0>, <14 0>, <15 0>, |
| <16 0>, <17 0>, <18 0>, <19 0>, |
| <20 0>, <21 0>, <22 0>, <23 0>, |
| <24 0>, <25 0>, <26 0>, <27 0>, |
| <28 0>, <29 0>, <30 0>, <31 0>, |
| <32 0>, <33 0>, <34 0>, <35 0>; |
| no-error-irq; |
| status = "disabled"; |
| }; |
| |
| emios0: emios@40088000 { |
| compatible = "nxp,s32-emios"; |
| reg = <0x40088000 0x4000>; |
| clocks = <&clock NXP_S32_EMIOS0_CLK>; |
| interrupts = <61 0>, <62 0>, <63 0>, |
| <64 0>, <65 0>, <66 0>; |
| interrupt-names = "0_0", "0_1", "0_2", |
| "0_3", "0_4", "0_5"; |
| internal-cnt = <0xC101FF>; |
| status = "disabled"; |
| |
| master_bus { |
| emios0_bus_a: emios0_bus_a { |
| channel = <23>; |
| bus-type = "BUS_A"; |
| channel-mask = <0x07FFFFF>; |
| status = "disabled"; |
| }; |
| |
| emios0_bus_b: emios0_bus_b { |
| channel = <0>; |
| bus-type = "BUS_B"; |
| channel-mask = <0x00000FE>; |
| status = "disabled"; |
| }; |
| |
| emios0_bus_c: emios0_bus_c { |
| channel = <8>; |
| bus-type = "BUS_C"; |
| channel-mask = <0x0000FE00>; |
| status = "disabled"; |
| }; |
| |
| emios0_bus_d: emios0_bus_d { |
| channel = <16>; |
| bus-type = "BUS_D"; |
| channel-mask = <0x00FE0000>; |
| status = "disabled"; |
| }; |
| |
| emios0_bus_f: emios0_bus_f { |
| channel = <22>; |
| bus-type = "BUS_F"; |
| channel-mask = <0x0BFFFFF>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm { |
| compatible = "nxp,s32-emios-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| emios1: emios@4008c000 { |
| compatible = "nxp,s32-emios"; |
| reg = <0x4008c000 0x4000>; |
| clocks = <&clock NXP_S32_EMIOS1_CLK>; |
| interrupts = <69 0>, <70 0>, <71 0>, |
| <72 0>, <73 0>, <74 0>; |
| interrupt-names = "1_0", "1_1", "1_2", |
| "1_3", "1_4", "1_5"; |
| internal-cnt = <0xC10101>; |
| status = "disabled"; |
| |
| master_bus { |
| emios1_bus_a: emios1_bus_a { |
| channel = <23>; |
| bus-type = "BUS_A"; |
| channel-mask = <0x07FFFFF>; |
| status = "disabled"; |
| }; |
| |
| emios1_bus_b: emios1_bus_b { |
| channel = <0>; |
| bus-type = "BUS_B"; |
| channel-mask = <0x00000FE>; |
| status = "disabled"; |
| }; |
| |
| emios1_bus_c: emios1_bus_c { |
| channel = <8>; |
| bus-type = "BUS_C"; |
| channel-mask = <0x0000FE00>; |
| status = "disabled"; |
| }; |
| |
| emios1_bus_d: emios1_bus_d { |
| channel = <16>; |
| bus-type = "BUS_D"; |
| channel-mask = <0x00FE0000>; |
| status = "disabled"; |
| }; |
| |
| emios1_bus_f: emios1_bus_f { |
| channel = <22>; |
| channel-mask = <0x0BFFFFF>; |
| bus-type = "BUS_F"; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm { |
| compatible = "nxp,s32-emios-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| emios2: emios@40090000 { |
| compatible = "nxp,s32-emios"; |
| reg = <0x40090000 0x4000>; |
| clocks = <&clock NXP_S32_EMIOS2_CLK>; |
| interrupts = <77 0>, <78 0>, <79 0>, |
| <80 0>, <81 0>, <82 0>; |
| interrupt-names = "2_0", "2_1", "2_2", |
| "2_3", "2_4", "2_5"; |
| internal-cnt = <0xC10101>; |
| status = "disabled"; |
| |
| master_bus { |
| emios2_bus_a: emios2_bus_a { |
| channel = <23>; |
| bus-type = "BUS_A"; |
| channel-mask = <0x07FFFFF>; |
| status = "disabled"; |
| }; |
| |
| emios2_bus_b: emios2_bus_b { |
| channel = <0>; |
| bus-type = "BUS_B"; |
| channel-mask = <0x00000FE>; |
| status = "disabled"; |
| }; |
| |
| emios2_bus_c: emios2_bus_c { |
| channel = <8>; |
| bus-type = "BUS_C"; |
| channel-mask = <0x0000FE00>; |
| status = "disabled"; |
| }; |
| |
| emios2_bus_d: emios2_bus_d { |
| channel = <16>; |
| bus-type = "BUS_D"; |
| channel-mask = <0x00FE0000>; |
| status = "disabled"; |
| }; |
| |
| emios2_bus_f: emios2_bus_f { |
| channel = <22>; |
| bus-type = "BUS_F"; |
| channel-mask = <0x0BFFFFF>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm { |
| compatible = "nxp,s32-emios-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flexio0: flexio@40324000 { |
| compatible = "nxp,flexio"; |
| reg = <0x40324000 0x4000>; |
| interrupts = <139 0>; |
| clocks = <&clock NXP_S32_FLEXIO0_CLK>; |
| status = "disabled"; |
| |
| flexio0_pwm { |
| compatible = "nxp,flexio-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| lcu0: lcu@40098000 { |
| compatible = "nxp,s32-lcu"; |
| reg = <0x40098000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| lcu1: lcu@4009c000 { |
| compatible = "nxp,s32-lcu"; |
| reg = <0x4009c000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| trgmux: trgmux@40080000 { |
| compatible = "nxp,s32-trgmux"; |
| reg = <0x40080000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| pmc: pmc@402e8000 { |
| compatible = "nxp,s32k3-pmc"; |
| reg = <0x402e8000 0x4000>; |
| }; |
| |
| mc_me: mc_me@402dc000 { |
| compatible = "nxp,s32-mc-me"; |
| reg = <0x402dc000 0x4000>; |
| }; |
| |
| mc_rgm: mc_rgm@4028c000 { |
| compatible = "nxp,s32-mc-rgm"; |
| reg = <0x4028c000 0x4000>; |
| func-reset-threshold = <0>; |
| dest-reset-threshold = <0>; |
| }; |
| |
| swt0: watchdog@40270000 { |
| compatible = "nxp,s32-swt"; |
| reg = <0x40270000 0x4000>; |
| interrupts = <42 0>; |
| clocks = <&clock NXP_S32_SIRC_CLK>; |
| service-mode = "fixed"; |
| status = "okay"; |
| }; |
| |
| stm0: stm@40274000 { |
| compatible = "nxp,s32-sys-timer"; |
| reg = <0x40274000 0x10000>; |
| interrupts = <39 0>; |
| clocks = <&clock NXP_S32_STM0_CLK>; |
| status = "disabled"; |
| }; |
| |
| stm1: stm@40474000 { |
| compatible = "nxp,s32-sys-timer"; |
| reg = <0x40474000 0x10000>; |
| interrupts = <40 0>; |
| clocks = <&clock NXP_S32_STM1_CLK>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <4>; |
| }; |
