| /* |
| * Copyright (c) 2021 Fabio Baltieri |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <zephyr/kernel.h> |
| #include <zephyr/pm/pm.h> |
| #include <soc.h> |
| #include <zephyr/init.h> |
| |
| #include <stm32wlxx_ll_utils.h> |
| #include <stm32wlxx_ll_bus.h> |
| #include <stm32wlxx_ll_cortex.h> |
| #include <stm32wlxx_ll_pwr.h> |
| #include <stm32wlxx_ll_rcc.h> |
| #include <stm32wlxx_ll_system.h> |
| #include <clock_control/clock_stm32_ll_common.h> |
| #include <zephyr/drivers/clock_control/stm32_clock_control.h> |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_DECLARE(soc, CONFIG_SOC_LOG_LEVEL); |
| |
| /* select MSI as wake-up system clock if configured, HSI otherwise */ |
| #if STM32_SYSCLK_SRC_MSI |
| #define RCC_STOP_WAKEUPCLOCK_SELECTED LL_RCC_STOP_WAKEUPCLOCK_MSI |
| #else |
| #define RCC_STOP_WAKEUPCLOCK_SELECTED LL_RCC_STOP_WAKEUPCLOCK_HSI |
| #endif |
| |
| /* Invoke Low Power/System Off specific Tasks */ |
| void pm_state_set(enum pm_state state, uint8_t substate_id) |
| { |
| switch (state) { |
| case PM_STATE_SUSPEND_TO_IDLE: |
| LL_RCC_SetClkAfterWakeFromStop(RCC_STOP_WAKEUPCLOCK_SELECTED); |
| LL_PWR_ClearFlag_WU(); |
| switch (substate_id) { |
| case 1: |
| LL_PWR_SetPowerMode(LL_PWR_MODE_STOP0); |
| break; |
| case 2: |
| LL_PWR_SetPowerMode(LL_PWR_MODE_STOP1); |
| break; |
| case 3: |
| LL_PWR_SetPowerMode(LL_PWR_MODE_STOP2); |
| break; |
| default: |
| LOG_DBG("Unsupported power substate-id %u", substate_id); |
| return; |
| } |
| LL_LPM_EnableDeepSleep(); |
| k_cpu_idle(); |
| break; |
| default: |
| LOG_DBG("Unsupported power state %u", state); |
| break; |
| } |
| } |
| |
| /* Handle SOC specific activity after Low Power Mode Exit */ |
| void pm_state_exit_post_ops(enum pm_state state, uint8_t substate_id) |
| { |
| ARG_UNUSED(substate_id); |
| |
| switch (state) { |
| case PM_STATE_SUSPEND_TO_IDLE: |
| LL_LPM_DisableSleepOnExit(); |
| LL_LPM_EnableSleep(); |
| /* need to restore the clock */ |
| stm32_clock_control_init(NULL); |
| break; |
| default: |
| LOG_DBG("Unsupported power substate-id %u", state); |
| break; |
| } |
| |
| /* |
| * System is now in active mode. |
| * Reenable interrupts which were disabled |
| * when OS started idling code. |
| */ |
| irq_unlock(0); |
| } |
| |
| /* Initialize STM32 Power */ |
| void stm32_pm_init(void) |
| { |
| } |