| /* |
| * Copyright (c) 2022 metraTec |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv8-m.dtsi> |
| #include <zephyr/dt-bindings/clock/mcux_lpc_syscon_clock.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <mem.h> |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-m33f"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mpu: mpu@e000ed90 { |
| compatible = "arm,armv8m-mpu"; |
| reg = <0xe000ed90 0x40>; |
| arm,num-mpu-regions = <8>; |
| }; |
| }; |
| }; |
| }; |
| |
| &sram { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* lpc55_0x Memory configurations: |
| * |
| * LPC5502: RAMX: 16K, SRAM0: 32K |
| * LPC55x04: RAMX: 16K, SRAM0: 32K, SRAM1: 16K |
| * LPC55x06: RAMX: 16K, SRAM0: 32K, SRAM1: 16K, SRAM2: 16K, SRAM3: 16k |
| */ |
| sramx: memory@4000000 { |
| compatible = "mmio-sram"; |
| reg = <0x04000000 DT_SIZE_K(16)>; |
| }; |
| sram0: memory@20000000 { |
| compatible = "mmio-sram"; |
| reg = <0x20000000 DT_SIZE_K(32)>; |
| }; |
| sram1: memory@20008000 { |
| compatible = "mmio-sram"; |
| reg = <0x20008000 DT_SIZE_K(16)>; |
| }; |
| sram2: memory@2000C000 { |
| compatible = "mmio-sram"; |
| reg = <0x2000C000 DT_SIZE_K(16)>; |
| }; |
| sram3: memory@20010000 { |
| compatible = "mmio-sram"; |
| reg = <0x20010000 DT_SIZE_K(16)>; |
| }; |
| }; |
| |
| &peripheral { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| syscon: syscon@0 { |
| compatible = "nxp,lpc-syscon"; |
| reg = <0x0 0x4000>; |
| #clock-cells = <1>; |
| }; |
| |
| iap: flash-controller@34000 { |
| compatible = "nxp,iap-fmc55"; |
| reg = <0x34000 0x18>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| flash0: flash@0 { |
| compatible = "soc-nv-flash"; |
| reg = <0x0 DT_SIZE_K(246)>; |
| erase-block-size = <512>; |
| write-block-size = <512>; |
| }; |
| |
| flash_reserved: flash@3d800 { |
| compatible = "soc-nv-flash"; |
| reg = <0x0003d800 DT_SIZE_K(10)>; |
| status = "disabled"; |
| }; |
| |
| uuid: flash@9fc70 { |
| compatible = "nxp,lpc-uid"; |
| reg = <0x3fc70 0x10>; |
| }; |
| |
| boot_rom: flash@3000000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x3000000 DT_SIZE_K(128)>; |
| }; |
| }; |
| |
| iocon: iocon@1000 { |
| compatible = "nxp,lpc-iocon"; |
| reg = <0x1000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1000 0x100>; |
| pinctrl: pinctrl { |
| compatible = "nxp,lpc-iocon-pinctrl"; |
| }; |
| }; |
| |
| gpio0: gpio@0 { |
| compatible = "nxp,lpc-gpio"; |
| reg = <0x8c000 0x2488>; |
| int-source = "pint"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| port = <0>; |
| }; |
| |
| gpio1: gpio@1 { |
| compatible = "nxp,lpc-gpio"; |
| reg = <0x8c000 0x2488>; |
| int-source = "pint"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| port = <1>; |
| }; |
| |
| pint: pint@4000 { |
| compatible = "nxp,pint"; |
| reg = <0x4000 0x1000>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| interrupts = <4 2>, <5 2>, <6 2>, <7 2>, |
| <32 2>, <33 2>, <34 2>, <35 2>; |
| num-lines = <8>; |
| num-inputs = <64>; |
| }; |
| |
| flexcomm0: flexcomm@86000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x86000 0x1000>; |
| interrupts = <14 0>; |
| clocks = <&syscon MCUX_FLEXCOMM0_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm1: flexcomm@87000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x87000 0x1000>; |
| interrupts = <15 0>; |
| clocks = <&syscon MCUX_FLEXCOMM1_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm2: flexcomm@88000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x88000 0x1000>; |
| interrupts = <16 0>; |
| clocks = <&syscon MCUX_FLEXCOMM2_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm3: flexcomm@89000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x89000 0x1000>; |
| interrupts = <17 0>; |
| clocks = <&syscon MCUX_FLEXCOMM3_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm4: flexcomm@8a000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x8a000 0x1000>; |
| interrupts = <18 0>; |
| clocks = <&syscon MCUX_FLEXCOMM4_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm5: flexcomm@96000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x96000 0x1000>; |
| interrupts = <19 0>; |
| clocks = <&syscon MCUX_FLEXCOMM5_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm6: flexcomm@97000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x97000 0x1000>; |
| interrupts = <20 0>; |
| clocks = <&syscon MCUX_FLEXCOMM6_CLK>; |
| status = "disabled"; |
| }; |
| |
| flexcomm7: flexcomm@98000 { |
| compatible = "nxp,lpc-flexcomm"; |
| reg = <0x98000 0x1000>; |
| interrupts = <21 0>; |
| clocks = <&syscon MCUX_FLEXCOMM7_CLK>; |
| status = "disabled"; |
| }; |
| |
| hs_lspi: spi@9f000 { |
| compatible = "nxp,lpc-spi"; |
| reg = <0x9f000 0x1000>; |
| interrupts = <59 0>; |
| clocks = <&syscon MCUX_HS_SPI_CLK>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| can0: can@9d000 { |
| compatible = "nxp,lpc-mcan"; |
| reg = <0x9d000 0x1000>; |
| interrupts = <43 0>, <44 0>; |
| clocks = <&syscon MCUX_MCAN_CLK>; |
| std-filter-elements = <15>; |
| ext-filter-elements = <15>; |
| rx-fifo0-elements = <8>; |
| rx-fifo1-elements = <8>; |
| rx-buffer-elements = <8>; |
| tx-buffer-elements = <15>; |
| sjw = <1>; |
| sample-point = <875>; |
| sjw-data = <1>; |
| sample-point-data = <875>; |
| status = "disabled"; |
| }; |
| |
| rng: rng@3a000 { |
| compatible = "nxp,lpc-rng"; |
| reg = <0x3a000 0x1000>; |
| status = "okay"; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <3>; |
| }; |