| /* |
| * Copyright (c) 2022 Intel Corporation. |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <zephyr/dt-bindings/interrupt-controller/intel-ioapic.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/pcie/pcie.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "intel,raptor-lake"; |
| d-cache-line-size = <64>; |
| reg = <0>; |
| }; |
| |
| }; |
| |
| dram0: memory@0 { |
| device_type = "memory"; |
| reg = <0x0 DT_DRAM_SIZE>; |
| }; |
| |
| intc: ioapic@fec00000 { |
| compatible = "intel,ioapic"; |
| reg = <0xfec00000 0x1000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| pcie0: pcie0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "intel,pcie"; |
| ranges; |
| |
| smbus0: smbus0 { |
| compatible = "intel,pch-smbus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7a23>; |
| interrupts = <18 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "okay"; |
| }; |
| |
| i2c0: i2c0 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7acc>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "okay"; |
| }; |
| |
| i2c1: i2c1 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7acd>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "okay"; |
| }; |
| |
| i2c2: i2c2 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7ace>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "okay"; |
| }; |
| |
| i2c3: i2c3 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7acf>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c4 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7afc>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c5 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7afd>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c6 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7ada>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c7 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0x7adb>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi0 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0x7aaa>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_0_i 15 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "okay"; |
| }; |
| |
| spi1: spi1 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0x7aab>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_0_i 19 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi2 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0x7afb>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_0_r 12 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart0 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7aa8>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "okay"; |
| }; |
| |
| uart1: uart1 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7aa9>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "okay"; |
| }; |
| |
| uart2: uart2 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7afe>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart3 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7adc>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart4: uart4 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7add>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart5: uart5 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7ade>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart6: uart6 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0x7adf>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| vtd: vtd@fed91000 { |
| compatible = "intel,vt-d"; |
| reg = <0xfed91000 0x1000>; |
| |
| status = "okay"; |
| }; |
| |
| uart_ec_0: uart@3f8 { |
| compatible = "ns16550"; |
| reg = <0x000003f8 0x100>; |
| clock-frequency = <1843200>; |
| interrupts = <4 IRQ_TYPE_LOWEST_EDGE_RISING 3>; |
| interrupt-parent = <&intc>; |
| reg-shift = <0>; |
| io-mapped; |
| status = "okay"; |
| }; |
| |
| gpio_0_i: gpio@e06e0700 { |
| compatible = "intel,gpio"; |
| reg = <0xe06e0700 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <23>; |
| pin-offset = <0>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_0_r: gpio@e06e0890 { |
| compatible = "intel,gpio"; |
| reg = <0xe06e0890 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <22>; |
| pin-offset = <26>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_0_j: gpio@e06e0a00 { |
| compatible = "intel,gpio"; |
| reg = <0xe06e0a00 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <12>; |
| pin-offset = <49>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_1_b: gpio@e06d0700 { |
| compatible = "intel,gpio"; |
| reg = <0xe06d0700 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <24>; |
| pin-offset = <0>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_1_g: gpio@e06d0880 { |
| compatible = "intel,gpio"; |
| reg = <0xe06d0880 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <8>; |
| pin-offset = <24>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_1_h: gpio@e06d0900 { |
| compatible = "intel,gpio"; |
| reg = <0xe06d0900 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <24>; |
| pin-offset = <32>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_3_a: gpio@e06b0790 { |
| compatible = "intel,gpio"; |
| reg = <0xe06b0790 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <15>; |
| pin-offset = <9>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_3_c: gpio@e06b0890 { |
| compatible = "intel,gpio"; |
| reg = <0xe06b0890 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <24>; |
| pin-offset = <25>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_4_s: gpio@e06a0700 { |
| compatible = "intel,gpio"; |
| reg = <0xe06a0700 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <8>; |
| pin-offset = <0>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_4_e: gpio@e06a0780 { |
| compatible = "intel,gpio"; |
| reg = <0xe06a0780 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <22>; |
| pin-offset = <8>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_4_k: gpio@e06a08f0 { |
| compatible = "intel,gpio"; |
| reg = <0xe06a08f0 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <12>; |
| pin-offset = <25>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_4_f: gpio@e06a09e0 { |
| compatible = "intel,gpio"; |
| reg = <0xe06a09e0 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <24>; |
| pin-offset = <41>; |
| |
| status = "okay"; |
| }; |
| |
| gpio_5_d: gpio@e0690700 { |
| compatible = "intel,gpio"; |
| reg = <0xe0690700 0x1000>; |
| interrupts = <14 IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| group-index = <0x0>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <24>; |
| pin-offset = <0>; |
| |
| status = "okay"; |
| }; |
| |
| rtc: counter: rtc@70 { |
| compatible = "motorola,mc146818"; |
| reg = <0x70 0x0D 0x71 0x0D>; |
| interrupts = <8 IRQ_TYPE_LOWEST_EDGE_RISING 3>; |
| interrupt-parent = <&intc>; |
| alarms-count = <1>; |
| |
| status = "okay"; |
| }; |
| |
| hpet: hpet@fed00000 { |
| compatible = "intel,hpet"; |
| reg = <0xfed00000 0x400>; |
| interrupts = <2 IRQ_TYPE_FIXED_EDGE_RISING 4>; |
| interrupt-parent = <&intc>; |
| |
| status = "okay"; |
| }; |
| |
| tco_wdt: tco_wdt@400 { |
| compatible = "intel,tco-wdt"; |
| reg = <0x0400 0x20>; |
| }; |
| }; |
| }; |
