| /* |
| * Copyright (c) 2021, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nxp/nxp_rt11xx_cm7.dtsi> |
| #include "mimxrt1160_evk.dtsi" |
| |
| / { |
| model = "NXP MIMXRT1160-EVK board"; |
| compatible = "nxp,mimxrt1166"; |
| |
| chosen { |
| zephyr,sram = &sdram0; |
| zephyr,dtcm = &dtcm; |
| zephyr,itcm = &itcm; |
| zephyr,console = &lpuart1; |
| zephyr,shell-uart = &lpuart1; |
| zephyr,canbus = &flexcan3; |
| zephyr,flash-controller = &is25wp128; |
| zephyr,flash = &is25wp128; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,cpu1-region = &ocram; |
| zephyr,ipc = &mailbox_a; |
| }; |
| |
| sdram0: memory@80000000 { |
| /* Winbond W9825G6KH-5I */ |
| device_type = "memory"; |
| reg = <0x80000000 DT_SIZE_M(64)>; |
| }; |
| |
| aliases { |
| watchdog0 = &wdog1; |
| }; |
| }; |
| |
| &lpuart1 { |
| status = "okay"; |
| current-speed = <115200>; |
| }; |
| |
| &flexcan3 { |
| status = "okay"; |
| bus-speed = <125000>; |
| |
| can-transceiver { |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| &lpi2c1 { |
| status = "okay"; |
| }; |
| |
| &lpspi1 { |
| status = "okay"; |
| }; |
| |
| /* GPT and Systick are enabled. If power management is enabled, the GPT |
| * timer will be used instead of systick, as allows the core clock to |
| * be gated. |
| */ |
| &gpt_hw_timer { |
| status = "okay"; |
| }; |
| |
| &systick { |
| status = "okay"; |
| }; |
| |
| &lpadc0 { |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| status = "okay"; |
| }; |
| |
| &edma0 { |
| status = "okay"; |
| }; |
| |
| &enet { |
| status = "okay"; |
| int-gpios = <&gpio9 11 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio12 12 GPIO_ACTIVE_HIGH>; |
| ptp { |
| status = "okay"; |
| }; |
| }; |
| |
| zephyr_udc0: &usb1 { |
| status = "okay"; |
| }; |
| |
| &mailbox_a { |
| status = "okay"; |
| }; |