| /* |
| * Copyright (c) 2024 Fredrik Gihl |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT ti_tmp114 |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/i2c.h> |
| #include <zephyr/drivers/sensor.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/sys/__assert.h> |
| #include <zephyr/logging/log.h> |
| #include <zephyr/kernel.h> |
| |
| LOG_MODULE_REGISTER(TMP114, CONFIG_SENSOR_LOG_LEVEL); |
| |
| #define TMP114_REG_TEMP 0x0 |
| #define TMP114_REG_ALERT 0x2 |
| #define TMP114_REG_CFGR 0x3 |
| #define TMP114_REG_DEVICE_ID 0xb |
| |
| #define TMP114_RESOLUTION 78125 /* in tens of uCelsius*/ |
| #define TMP114_RESOLUTION_DIV 10000000 |
| |
| #define TMP114_DEVICE_ID 0x1114 |
| |
| #define TMP114_ALERT_DATA_READY BIT(0) |
| |
| struct tmp114_data { |
| uint16_t sample; |
| uint16_t id; |
| }; |
| |
| struct tmp114_dev_config { |
| struct i2c_dt_spec bus; |
| }; |
| |
| static int tmp114_reg_read(const struct device *dev, uint8_t reg, |
| uint16_t *val) |
| { |
| const struct tmp114_dev_config *cfg = dev->config; |
| |
| if (i2c_burst_read_dt(&cfg->bus, reg, (uint8_t *)val, 2) |
| < 0) { |
| return -EIO; |
| } |
| |
| *val = sys_be16_to_cpu(*val); |
| |
| return 0; |
| } |
| |
| static inline int tmp114_device_id_check(const struct device *dev, uint16_t *id) |
| { |
| if (tmp114_reg_read(dev, TMP114_REG_DEVICE_ID, id) != 0) { |
| LOG_ERR("%s: Failed to get Device ID register!", dev->name); |
| return -EIO; |
| } |
| |
| if (*id != TMP114_DEVICE_ID) { |
| LOG_ERR("%s: Failed to match the device ID!", dev->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int tmp114_sample_fetch(const struct device *dev, |
| enum sensor_channel chan) |
| { |
| struct tmp114_data *drv_data = dev->data; |
| uint16_t value; |
| uint16_t cfg_reg = 0; |
| int rc; |
| |
| __ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL || |
| chan == SENSOR_CHAN_AMBIENT_TEMP); |
| |
| /* clear sensor values */ |
| drv_data->sample = 0U; |
| |
| /* Check alert register to make sure that a data is available */ |
| rc = tmp114_reg_read(dev, TMP114_REG_ALERT, &cfg_reg); |
| if (rc < 0) { |
| LOG_ERR("%s, Failed to read from CFGR register", dev->name); |
| return rc; |
| } |
| |
| if ((cfg_reg & TMP114_ALERT_DATA_READY) == 0) { |
| LOG_DBG("%s: no data ready", dev->name); |
| return -EBUSY; |
| } |
| |
| /* Get the most recent temperature measurement */ |
| rc = tmp114_reg_read(dev, TMP114_REG_TEMP, &value); |
| if (rc < 0) { |
| LOG_ERR("%s: Failed to read from TEMP register!", dev->name); |
| return rc; |
| } |
| |
| /* store measurements to the driver */ |
| drv_data->sample = (int16_t)value; |
| |
| return 0; |
| } |
| |
| static int tmp114_channel_get(const struct device *dev, |
| enum sensor_channel chan, |
| struct sensor_value *val) |
| { |
| struct tmp114_data *drv_data = dev->data; |
| int32_t tmp; |
| |
| if (chan != SENSOR_CHAN_AMBIENT_TEMP) { |
| return -ENOTSUP; |
| } |
| |
| /* |
| * See datasheet for tmp114, section 'Temp_Result Register' section |
| * for more details on processing sample data. |
| */ |
| tmp = ((int16_t)drv_data->sample * (int32_t)TMP114_RESOLUTION) / 10; |
| val->val1 = tmp / 1000000; /* uCelsius */ |
| val->val2 = tmp % 1000000; |
| |
| return 0; |
| } |
| |
| static int tmp114_attr_get(const struct device *dev, enum sensor_channel chan, |
| enum sensor_attribute attr, struct sensor_value *val) |
| { |
| uint16_t data; |
| int rc; |
| |
| if (chan != SENSOR_CHAN_AMBIENT_TEMP) { |
| return -ENOTSUP; |
| } |
| |
| switch (attr) { |
| case SENSOR_ATTR_CONFIGURATION: |
| rc = tmp114_reg_read(dev, TMP114_REG_CFGR, &data); |
| if (rc < 0) { |
| return rc; |
| } |
| break; |
| default: |
| return -ENOTSUP; |
| } |
| |
| val->val1 = data; |
| val->val2 = 0; |
| |
| return 0; |
| } |
| |
| static const struct sensor_driver_api tmp114_driver_api = { |
| .attr_get = tmp114_attr_get, |
| .sample_fetch = tmp114_sample_fetch, |
| .channel_get = tmp114_channel_get |
| }; |
| |
| static int tmp114_init(const struct device *dev) |
| { |
| struct tmp114_data *drv_data = dev->data; |
| const struct tmp114_dev_config *cfg = dev->config; |
| int rc; |
| uint16_t id; |
| |
| if (!i2c_is_ready_dt(&cfg->bus)) { |
| LOG_ERR("I2C dev %s not ready", cfg->bus.bus->name); |
| return -EINVAL; |
| } |
| |
| /* Check the Device ID */ |
| rc = tmp114_device_id_check(dev, &id); |
| if (rc < 0) { |
| return rc; |
| } |
| LOG_INF("Got device ID: %x", id); |
| drv_data->id = id; |
| |
| return 0; |
| } |
| |
| #define DEFINE_TMP114(_num) \ |
| static struct tmp114_data tmp114_data_##_num; \ |
| static const struct tmp114_dev_config tmp114_config_##_num = { \ |
| .bus = I2C_DT_SPEC_INST_GET(_num) \ |
| }; \ |
| SENSOR_DEVICE_DT_INST_DEFINE(_num, tmp114_init, NULL, \ |
| &tmp114_data_##_num, &tmp114_config_##_num, POST_KERNEL, \ |
| CONFIG_SENSOR_INIT_PRIORITY, &tmp114_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(DEFINE_TMP114) |