| # Kconfig - Bluetooth LE stack configuration options |
| |
| # |
| # Copyright (c) 2016-2017 Nordic Semiconductor ASA |
| # Copyright (c) 2015-2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| comment "Host Stack Configuration" |
| |
| config BLUETOOTH_HCI_HOST |
| # Virtual/hidden option to make the conditions more intuitive |
| bool |
| default y |
| depends on !BLUETOOTH_HCI_RAW |
| select POLL |
| |
| config BLUETOOTH_HCI_CMD_COUNT |
| int "Number of HCI command buffers" |
| default 2 |
| range 2 64 |
| help |
| Number of buffers available for HCI commands. |
| |
| config BLUETOOTH_RX_BUF_COUNT |
| int "Number of HCI RX buffers" |
| default 10 |
| default 3 if BLUETOOTH_RECV_IS_RX_THREAD |
| range 2 255 |
| help |
| Number of buffers available for incoming ACL packets or HCI events |
| from the controller. |
| |
| config BLUETOOTH_RX_BUF_LEN |
| int "Maximum supported HCI RX buffer length" |
| default 76 |
| default 264 if BLUETOOTH_BREDR |
| range 73 2000 |
| help |
| Maximum data size for each HCI RX buffer. This size includes |
| everything starting with the ACL or HCI event headers. Note that |
| buffer sizes are always rounded up to the nearest multiple of 4, |
| so if this Kconfig value is something else then there will be some |
| wasted space. The minimum of 73 has been taken for LE SC which has |
| an L2CAP MTU of 65 bytes. On top of this there's the L2CAP header |
| (4 bytes) and the ACL header (also 4 bytes) which yields 73 bytes. |
| |
| config BLUETOOTH_HCI_TX_STACK_SIZE |
| # Stack size needed for executing bt_send with specified driver |
| int |
| # Even if no driver is selected the following default is still |
| # needed e.g. for unit tests. |
| default 256 |
| default 256 if BLUETOOTH_H4 |
| default 256 if BLUETOOTH_H5 |
| default 256 if BLUETOOTH_SPI |
| default 640 if BLUETOOTH_CONTROLLER |
| |
| config BLUETOOTH_RECV_IS_RX_THREAD |
| # Virtual option set by the HCI driver to indicate that there's |
| # no need for the host to have its own RX thread, rather the |
| # context that bt_recv() gets called in is already good enough. |
| # If this is set, the driver RX thread is required as the first |
| # thing to make a call to bt_rx_thread_ready(). |
| bool |
| |
| config BLUETOOTH_RX_STACK_SIZE |
| int "Size of the receiving thread stack" |
| depends on BLUETOOTH_HCI_HOST || BLUETOOTH_RECV_IS_RX_THREAD |
| default 1024 |
| default 512 if CONFIG_BLUETOOTH_HCI_RAW |
| range 1024 65536 |
| range 512 65536 if CONFIG_BLUETOOTH_HCI_RAW |
| help |
| Size of the receiving thread stack. This is the context from |
| which all event callbacks to the application occur. The |
| default value is sufficient for basic operation, but if the |
| application needs to do advanced things in its callbacks that |
| require extra stack space, this value can be increased to |
| accommodate for that. |
| |
| if BLUETOOTH_HCI_HOST |
| config BLUETOOTH_HOST_CRYPTO |
| # Hidden option that compiles in random number generation and AES |
| # encryption support using TinyCrypt library if software-based |
| # controller is disabled. |
| bool |
| default y if !BLUETOOTH_CONTROLLER |
| select TINYCRYPT |
| select TINYCRYPT_AES |
| select TINYCRYPT_SHA256 |
| select TINYCRYPT_SHA256_HMAC |
| select TINYCRYPT_SHA256_HMAC_PRNG |
| |
| config BLUETOOTH_INTERNAL_STORAGE |
| bool "Use an internal persistent storage handler" |
| depends on FILE_SYSTEM |
| depends on PRINTK |
| help |
| When selected the application doesn't need to register its own |
| persistent storage handlers through the bt_storage API, rather |
| an internal default handler is used for this. |
| |
| if BLUETOOTH_CONN |
| |
| if BLUETOOTH_HCI_ACL_FLOW_CONTROL |
| config BLUETOOTH_ACL_RX_COUNT |
| int "Number of incoming ACL data buffers" |
| default 6 |
| default BLUETOOTH_CONTROLLER_RX_BUFFERS if BLUETOOTH_CONTROLLER |
| range 2 64 |
| help |
| Number of buffers available for incoming ACL data. |
| |
| config BLUETOOTH_L2CAP_RX_MTU |
| int "Maximum supported L2CAP MTU for incoming data" |
| default 23 |
| default 65 if BLUETOOTH_SMP |
| default 200 if BLUETOOTH_BREDR |
| range 23 1300 |
| range 65 1300 if BLUETOOTH_SMP |
| help |
| Maximum size of each incoming L2CAP PDU. |
| endif # BLUETOOTH_HCI_ACL_FLOW_CONTROL |
| |
| config BLUETOOTH_L2CAP_TX_BUF_COUNT |
| int "Number of L2CAP TX buffers" |
| default 3 |
| range 2 255 |
| help |
| Number of buffers available for outgoing L2CAP packets. |
| |
| config BLUETOOTH_L2CAP_TX_MTU |
| int "Maximum supported L2CAP MTU for L2CAP TX buffers" |
| default 23 |
| default 65 if BLUETOOTH_SMP |
| default 253 if BLUETOOTH_BREDR |
| range 23 2000 |
| range 65 2000 if BLUETOOTH_SMP |
| help |
| Maximum L2CAP MTU for L2CAP TX buffers. |
| |
| config BLUETOOTH_CONN_TX_MAX |
| int "Maximum number of pending TX buffers" |
| default 7 |
| default BLUETOOTH_CONTROLLER_TX_BUFFERS if BLUETOOTH_CONTROLLER |
| range 1 128 |
| help |
| Maximum number of pending TX buffers that have not yet |
| been acknowledged by the controller. |
| |
| config BLUETOOTH_L2CAP_TX_USER_DATA_SIZE |
| int "Maximum supported user data size for L2CAP TX buffers" |
| default 4 |
| range 4 65535 |
| help |
| Maximum supported user data size for L2CAP TX buffers. |
| |
| config BLUETOOTH_ATT_ENFORCE_FLOW |
| bool "Enforce strict flow control semantics for incoming PDUs" |
| default y |
| default n if BOARD_QEMU_CORTEX_M3 || BOARD_QEMU_X86 |
| help |
| Enforce flow control rules on incoming PDUs, preventing a peer |
| from sending new requests until a previous one has been responded |
| or sending a new indication until a previous one has been |
| confirmed. This may need to be disabled to avoid potential race |
| conditions arising from a USB based HCI transport that splits |
| HCI events and ACL data to separate endpoints. |
| |
| config BLUETOOTH_ATT_PREPARE_COUNT |
| int "Number of ATT prepare write buffers" |
| default 0 |
| range 0 64 |
| help |
| Number of buffers available for ATT prepare write, setting |
| this to 0 disables GATT long/reliable writes. |
| |
| config BLUETOOTH_ATT_TX_MAX |
| int "Maximum number of queued outgoing ATT PDUs" |
| default 2 |
| range 1 BLUETOOTH_L2CAP_TX_BUF_COUNT |
| help |
| Number of ATT PDUs that can be at a single moment queued for |
| transmission. If the application tries to send more than this |
| amount the calls will block until an existing queued PDU gets |
| sent. |
| |
| config BLUETOOTH_SMP |
| bool "Security Manager Protocol support" |
| select BLUETOOTH_RPA |
| select TINYCRYPT |
| select TINYCRYPT_AES |
| select TINYCRYPT_AES_CMAC |
| help |
| This option enables support for the Security Manager Protocol |
| (SMP), making it possible to pair devices over LE. |
| |
| if BLUETOOTH_SMP |
| config BLUETOOTH_PRIVACY |
| bool "Privacy Feature" |
| help |
| Enable local Privacy Feature support. This makes it possible |
| to use Resolvable Private Addresses (RPAs). |
| |
| config BLUETOOTH_RPA_TIMEOUT |
| int "Resolvable Private Address timeout" |
| depends on BLUETOOTH_PRIVACY |
| default 900 |
| range 1 65535 |
| help |
| This option defines how often resolvable private address is rotated. |
| Value is provided in seconds and defaults to 900 seconds (15 minutes). |
| |
| config BLUETOOTH_SIGNING |
| bool "Data signing support" |
| help |
| This option enables data signing which is used for transferring |
| authenticated data in an unencrypted connection. |
| |
| config BLUETOOTH_SMP_SC_ONLY |
| bool "Secure Connections Only Mode" |
| help |
| This option enables support for Secure Connection Only Mode. In this |
| mode device shall only use Security Mode 1 Level 4 with exception |
| for services that only require Security Mode 1 Level 1 (no security). |
| Security Mode 1 Level 4 stands for authenticated LE Secure Connections |
| pairing with encryption. Enabling this option disables legacy pairing. |
| |
| config BLUETOOTH_USE_DEBUG_KEYS |
| bool "Enable Security Manager Debug Mode" |
| depends on BLUETOOTH_TINYCRYPT_ECC |
| help |
| This option places Security Manager in a Debug Mode. In this mode |
| predefined Diffie-Hellman private/public key pair is used as described |
| in Core Specification Vol. 3, Part H, 2.3.5.6.1. This option should |
| only be enabled for debugging and should never be used in production. |
| If this option is enabled anyone is able to decipher encrypted air |
| traffic. |
| |
| endif # BLUETOOTH_SMP |
| |
| config BLUETOOTH_L2CAP_DYNAMIC_CHANNEL |
| bool "L2CAP Dynamic Channel support" |
| depends on BLUETOOTH_SMP |
| help |
| This option enables support for LE Connection oriented Channels, |
| allowing the creation of dynamic L2CAP Channels. |
| |
| config BLUETOOTH_GATT_DYNAMIC_DB |
| bool "GATT dynamic database support" |
| help |
| This option enables GATT services to be added dynamically to database. |
| |
| config BLUETOOTH_GATT_CLIENT |
| bool "GATT client support" |
| help |
| This option enables support for the GATT Client role. |
| |
| config BLUETOOTH_MAX_PAIRED |
| int "Maximum number of paired devices" |
| default 1 |
| range 1 128 |
| help |
| Maximum number of paired Bluetooth devices. The minimum (and |
| default) number is 1. |
| |
| endif # BLUETOOTH_CONN |
| |
| config BLUETOOTH_DEVICE_NAME |
| string "Bluetooth device name" |
| default "Zephyr" |
| help |
| Bluetooth device name. Name can be up to 248 bytes long (excluding |
| NULL termination). Can be empty string. |
| |
| endif # BLUETOOTH_HCI_HOST |
| |
| config BLUETOOTH_TINYCRYPT_ECC |
| bool "Use TinyCrypt library for ECDH" |
| select TINYCRYPT |
| select TINYCRYPT_ECC_DH |
| depends on BLUETOOTH_HCI_RAW || BLUETOOTH_HCI_HOST |
| help |
| If this option is set TinyCrypt library is used for emulating the |
| ECDH HCI commands and events needed by e.g. LE Secure Connections. |
| In builds including the BLE Host, if not set the controller crypto is |
| used for ECDH and if the controller doesn't support the required HCI |
| commands the LE Secure Connections support will be disabled. |
| In builds including the HCI Raw interface and the BLE Controller, this |
| option injects support for the 2 HCI commands required for LE Secure |
| Connections so that Hosts can make use of those. |
| |
| if BLUETOOTH_DEBUG |
| config BLUETOOTH_DEBUG_HCI_CORE |
| bool "Bluetooth HCI core debug" |
| help |
| This option enables debug support for Bluetooth HCI |
| core. |
| |
| config BLUETOOTH_DEBUG_CONN |
| bool "Bluetooth connection debug" |
| depends on BLUETOOTH_CONN |
| help |
| This option enables debug support for Bluetooth |
| connection handling. |
| |
| config BLUETOOTH_DEBUG_KEYS |
| bool "Bluetooth security keys debug" |
| depends on BLUETOOTH_HCI_HOST |
| depends on BLUETOOTH_SMP |
| help |
| This option enables debug support for the handling of |
| Bluetooth security keys. |
| |
| config BLUETOOTH_DEBUG_L2CAP |
| bool "Bluetooth L2CAP debug" |
| depends on BLUETOOTH_CONN |
| help |
| This option enables debug support for the Bluetooth |
| L2ACP layer. |
| |
| config BLUETOOTH_DEBUG_SMP |
| bool "Bluetooth Security Manager Protocol (SMP) debug" |
| depends on BLUETOOTH_HCI_HOST |
| depends on BLUETOOTH_SMP |
| help |
| This option enables debug support for the Bluetooth |
| Security Manager Protocol (SMP). |
| |
| config BLUETOOTH_SMP_SELFTEST |
| bool "Bluetooth SMP self tests executed on init" |
| depends on BLUETOOTH_DEBUG_SMP |
| help |
| This option enables SMP self-tests executed on startup |
| to verify security and crypto functions. |
| |
| config BLUETOOTH_SMP_FORCE_BREDR |
| bool "Force Bluetooth SMP over BR/EDR" |
| depends on BLUETOOTH_DEBUG_SMP |
| help |
| This option enables SMP over BR/EDR even if controller is not |
| supporting BR/EDR Secure Connections. This option is solely for |
| testing and should never be enabled on production devices. |
| |
| config BLUETOOTH_DEBUG_ATT |
| bool "Bluetooth Attribute Protocol (ATT) debug" |
| depends on BLUETOOTH_CONN |
| help |
| This option enables debug support for the Bluetooth |
| Attribute Protocol (ATT). |
| |
| config BLUETOOTH_DEBUG_GATT |
| bool "Bluetooth Generic Attribute Profile (GATT) debug" |
| depends on BLUETOOTH_CONN |
| help |
| This option enables debug support for the Bluetooth |
| Generic Attribute Profile (GATT). |
| |
| config BLUETOOTH_DEBUG_RFCOMM |
| bool "Bluetooth RFCOMM debug" |
| depends on BLUETOOTH_RFCOMM |
| help |
| This option enables debug support for the Bluetooth |
| RFCOMM layer. |
| |
| config BLUETOOTH_DEBUG_HFP_HF |
| bool "Bluetooth Hands Free Profile (HFP) debug" |
| depends on BLUETOOTH_HFP_HF |
| help |
| This option enables debug support for the Bluetooth |
| Hands Free Profile (HFP). |
| |
| config BLUETOOTH_DEBUG_AVDTP |
| bool "Bluetooth AVDTP debug" |
| depends on BLUETOOTH_AVDTP |
| help |
| This option enables debug support for the Bluetooth AVDTP. |
| |
| config BLUETOOTH_DEBUG_A2DP |
| bool "Bluetooth A2DP debug" |
| depends on BLUETOOTH_A2DP |
| help |
| This option enables debug support for the Bluetooth |
| A2DP profile. |
| |
| config BLUETOOTH_DEBUG_SDP |
| bool "Bluetooth Service Discovery Protocol (SDP) debug" |
| depends on BLUETOOTH_BREDR |
| help |
| This option enables debug support for the Bluetooth |
| Service Discovery Protocol (SDP). |
| |
| endif # BLUETOOTH_DEBUG |
| |
| config BLUETOOTH_BREDR |
| bool "Bluetooth BR/EDR support [EXPERIMENTAL]" |
| depends on BLUETOOTH_HCI_HOST |
| select BLUETOOTH_PERIPHERAL |
| select BLUETOOTH_CENTRAL |
| select BLUETOOTH_SMP |
| select BLUETOOTH_L2CAP_DYNAMIC_CHANNEL |
| help |
| This option enables Bluetooth BR/EDR support" |
| |
| if BLUETOOTH_BREDR |
| config BLUETOOTH_MAX_SCO_CONN |
| int "Maximum number of simultaneous SCO connections" |
| default 1 |
| range 1 3 |
| help |
| Maximum number of simultaneous Bluetooth synchronous connections |
| supported. The minimum (and default) number is 1. |
| |
| config BLUETOOTH_RFCOMM |
| bool "Bluetooth RFCOMM protocol support [EXPERIMENTAL]" |
| help |
| This option enables Bluetooth RFCOMM support |
| |
| config BLUETOOTH_RFCOMM_L2CAP_MTU |
| int "L2CAP MTU for RFCOMM frames" |
| default BLUETOOTH_RX_BUF_LEN |
| default BLUETOOTH_L2CAP_RX_MTU if BLUETOOTH_HCI_ACL_FLOW_CONTROL |
| depends on BLUETOOTH_RFCOMM |
| range BLUETOOTH_RX_BUF_LEN 32767 |
| range BLUETOOTH_L2CAP_RX_MTU 32767 if BLUETOOTH_HCI_ACL_FLOW_CONTROL |
| help |
| Maximum size of L2CAP PDU for RFCOMM frames. |
| |
| config BLUETOOTH_HFP_HF |
| bool "Bluetooth Handsfree profile HF Role support [EXPERIMENTAL]" |
| depends on PRINTK |
| select BLUETOOTH_RFCOMM |
| help |
| This option enables Bluetooth HF support |
| |
| config BLUETOOTH_AVDTP |
| bool "Bluetooth AVDTP protocol support [EXPERIMENTAL]" |
| help |
| This option enables Bluetooth AVDTP support |
| |
| config BLUETOOTH_A2DP |
| bool "Bluetooth A2DP Profile [EXPERIMENTAL]" |
| select BLUETOOTH_AVDTP |
| help |
| This option enables the A2DP profile |
| |
| config BLUETOOTH_PAGE_TIMEOUT |
| hex "Bluetooth Page Timeout" |
| default 0x2000 |
| range 0x0001 0xffff |
| help |
| This option sets the page timeout value. Value is selected as |
| (N * 0.625) ms. |
| |
| endif # BLUETOOTH_BREDR |
