| /* |
| * Copyright (c) 2016 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <errno.h> |
| #include <i2c.h> |
| #include <soc.h> |
| #include <fsl_i2c.h> |
| #include <fsl_clock.h> |
| #include <misc/util.h> |
| #include "i2c-priv.h" |
| |
| #define DEV_CFG(dev) \ |
| ((const struct i2c_mcux_config * const)(dev)->config->config_info) |
| #define DEV_DATA(dev) \ |
| ((struct i2c_mcux_data * const)(dev)->driver_data) |
| #define DEV_BASE(dev) \ |
| ((I2C_Type *)(DEV_CFG(dev))->base) |
| |
| struct i2c_mcux_config { |
| I2C_Type *base; |
| clock_name_t clock_source; |
| void (*irq_config_func)(struct device *dev); |
| u32_t bitrate; |
| }; |
| |
| struct i2c_mcux_data { |
| i2c_master_handle_t handle; |
| struct k_sem device_sync_sem; |
| status_t callback_status; |
| }; |
| |
| static int i2c_mcux_configure(struct device *dev, u32_t dev_config_raw) |
| { |
| I2C_Type *base = DEV_BASE(dev); |
| const struct i2c_mcux_config *config = DEV_CFG(dev); |
| u32_t clock_freq; |
| u32_t baudrate; |
| |
| if (!(I2C_MODE_MASTER & dev_config_raw)) { |
| return -EINVAL; |
| } |
| |
| if (I2C_ADDR_10_BITS & dev_config_raw) { |
| return -EINVAL; |
| } |
| |
| switch (I2C_SPEED_GET(dev_config_raw)) { |
| case I2C_SPEED_STANDARD: |
| baudrate = KHZ(100); |
| break; |
| case I2C_SPEED_FAST: |
| baudrate = MHZ(1); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| clock_freq = CLOCK_GetFreq(config->clock_source); |
| I2C_MasterSetBaudRate(base, baudrate, clock_freq); |
| |
| return 0; |
| } |
| |
| static void i2c_mcux_master_transfer_callback(I2C_Type *base, |
| i2c_master_handle_t *handle, status_t status, void *userData) |
| { |
| struct device *dev = userData; |
| struct i2c_mcux_data *data = DEV_DATA(dev); |
| |
| ARG_UNUSED(handle); |
| ARG_UNUSED(base); |
| |
| data->callback_status = status; |
| k_sem_give(&data->device_sync_sem); |
| } |
| |
| static u32_t i2c_mcux_convert_flags(int msg_flags) |
| { |
| u32_t flags = 0; |
| |
| if (!(msg_flags & I2C_MSG_STOP)) { |
| flags |= kI2C_TransferNoStopFlag; |
| } |
| |
| if (msg_flags & I2C_MSG_RESTART) { |
| flags |= kI2C_TransferRepeatedStartFlag; |
| } |
| |
| return flags; |
| } |
| |
| static int i2c_mcux_transfer(struct device *dev, struct i2c_msg *msgs, |
| u8_t num_msgs, u16_t addr) |
| { |
| I2C_Type *base = DEV_BASE(dev); |
| struct i2c_mcux_data *data = DEV_DATA(dev); |
| i2c_master_transfer_t transfer; |
| status_t status; |
| |
| /* Iterate over all the messages */ |
| for (int i = 0; i < num_msgs; i++) { |
| |
| /* Initialize the transfer descriptor */ |
| transfer.flags = i2c_mcux_convert_flags(msgs->flags); |
| transfer.slaveAddress = addr; |
| transfer.direction = (msgs->flags & I2C_MSG_READ) |
| ? kI2C_Read : kI2C_Write; |
| transfer.subaddress = 0; |
| transfer.subaddressSize = 0; |
| transfer.data = msgs->buf; |
| transfer.dataSize = msgs->len; |
| |
| /* Start the transfer */ |
| status = I2C_MasterTransferNonBlocking(base, |
| &data->handle, &transfer); |
| |
| /* Return an error if the transfer didn't start successfully |
| * e.g., if the bus was busy |
| */ |
| if (status != kStatus_Success) { |
| return -EIO; |
| } |
| |
| /* Wait for the transfer to complete */ |
| k_sem_take(&data->device_sync_sem, K_FOREVER); |
| |
| /* Return an error if the transfer didn't complete |
| * successfully. e.g., nak, timeout, lost arbitration |
| */ |
| if (data->callback_status != kStatus_Success) { |
| return -EIO; |
| } |
| |
| /* Move to the next message */ |
| msgs++; |
| } |
| |
| return 0; |
| } |
| |
| static void i2c_mcux_isr(void *arg) |
| { |
| struct device *dev = (struct device *)arg; |
| I2C_Type *base = DEV_BASE(dev); |
| struct i2c_mcux_data *data = DEV_DATA(dev); |
| |
| I2C_MasterTransferHandleIRQ(base, &data->handle); |
| } |
| |
| static int i2c_mcux_init(struct device *dev) |
| { |
| I2C_Type *base = DEV_BASE(dev); |
| const struct i2c_mcux_config *config = DEV_CFG(dev); |
| struct i2c_mcux_data *data = DEV_DATA(dev); |
| u32_t clock_freq, bitrate_cfg; |
| i2c_master_config_t master_config; |
| int error; |
| |
| k_sem_init(&data->device_sync_sem, 0, UINT_MAX); |
| |
| clock_freq = CLOCK_GetFreq(config->clock_source); |
| I2C_MasterGetDefaultConfig(&master_config); |
| I2C_MasterInit(base, &master_config, clock_freq); |
| I2C_MasterTransferCreateHandle(base, &data->handle, |
| i2c_mcux_master_transfer_callback, dev); |
| |
| bitrate_cfg = _i2c_map_dt_bitrate(config->bitrate); |
| |
| error = i2c_mcux_configure(dev, I2C_MODE_MASTER | bitrate_cfg); |
| if (error) { |
| return error; |
| } |
| |
| config->irq_config_func(dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_driver_api i2c_mcux_driver_api = { |
| .configure = i2c_mcux_configure, |
| .transfer = i2c_mcux_transfer, |
| }; |
| |
| #ifdef CONFIG_I2C_0 |
| static void i2c_mcux_config_func_0(struct device *dev); |
| |
| static const struct i2c_mcux_config i2c_mcux_config_0 = { |
| .base = (I2C_Type *)CONFIG_I2C_MCUX_0_BASE_ADDRESS, |
| .clock_source = I2C0_CLK_SRC, |
| .irq_config_func = i2c_mcux_config_func_0, |
| .bitrate = CONFIG_I2C_MCUX_0_BITRATE, |
| }; |
| |
| static struct i2c_mcux_data i2c_mcux_data_0; |
| |
| DEVICE_AND_API_INIT(i2c_mcux_0, CONFIG_I2C_0_NAME, &i2c_mcux_init, |
| &i2c_mcux_data_0, &i2c_mcux_config_0, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &i2c_mcux_driver_api); |
| |
| static void i2c_mcux_config_func_0(struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| IRQ_CONNECT(CONFIG_I2C_MCUX_0_IRQ, CONFIG_I2C_MCUX_0_IRQ_PRI, |
| i2c_mcux_isr, DEVICE_GET(i2c_mcux_0), 0); |
| |
| irq_enable(CONFIG_I2C_MCUX_0_IRQ); |
| } |
| #endif /* CONFIG_I2C_0 */ |
| |
| #ifdef CONFIG_I2C_1 |
| static void i2c_mcux_config_func_1(struct device *dev); |
| |
| static const struct i2c_mcux_config i2c_mcux_config_1 = { |
| .base = (I2C_Type *)CONFIG_I2C_MCUX_1_BASE_ADDRESS, |
| .clock_source = I2C1_CLK_SRC, |
| .irq_config_func = i2c_mcux_config_func_1, |
| .bitrate = CONFIG_I2C_MCUX_1_BITRATE, |
| }; |
| |
| static struct i2c_mcux_data i2c_mcux_data_1; |
| |
| DEVICE_AND_API_INIT(i2c_mcux_1, CONFIG_I2C_1_NAME, &i2c_mcux_init, |
| &i2c_mcux_data_1, &i2c_mcux_config_1, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &i2c_mcux_driver_api); |
| |
| static void i2c_mcux_config_func_1(struct device *dev) |
| { |
| IRQ_CONNECT(CONFIG_I2C_MCUX_1_IRQ, CONFIG_I2C_MCUX_1_IRQ_PRI, |
| i2c_mcux_isr, DEVICE_GET(i2c_mcux_1), 0); |
| |
| irq_enable(CONFIG_I2C_MCUX_1_IRQ); |
| } |
| #endif /* CONFIG_I2C_1 */ |