| /** |
| ****************************************************************************** |
| * @file stm32l0xx_ll_cortex.h |
| * @author MCD Application Team |
| * @brief Header file of CORTEX LL module. |
| @verbatim |
| ============================================================================== |
| ##### How to use this driver ##### |
| ============================================================================== |
| [..] |
| The LL CORTEX driver contains a set of generic APIs that can be |
| used by user: |
| (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick |
| functions |
| (+) Low power mode configuration (SCB register of Cortex-MCU) |
| (+) MPU API to configure and enable regions |
| (+) API to access to MCU info (CPUID register) |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L0xx_LL_CORTEX_H |
| #define __STM32L0xx_LL_CORTEX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l0xx.h" |
| |
| /** @addtogroup STM32L0xx_LL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup CORTEX_LL CORTEX |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source |
| * @{ |
| */ |
| #define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U) /*!< AHB clock divided by 8 selected as SysTick clock source.*/ |
| #define LL_SYSTICK_CLKSOURCE_HCLK ((uint32_t)SysTick_CTRL_CLKSOURCE_Msk) /*!< AHB clock selected as SysTick clock source. */ |
| /** |
| * @} |
| */ |
| |
| #if __MPU_PRESENT |
| |
| /** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control |
| * @{ |
| */ |
| #define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U) /*!< Disable NMI and privileged SW access */ |
| #define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ |
| #define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ |
| #define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_REGION MPU Region Number |
| * @{ |
| */ |
| #define LL_MPU_REGION_NUMBER0 ((uint32_t)0x00U) /*!< REGION Number 0 */ |
| #define LL_MPU_REGION_NUMBER1 ((uint32_t)0x01U) /*!< REGION Number 1 */ |
| #define LL_MPU_REGION_NUMBER2 ((uint32_t)0x02U) /*!< REGION Number 2 */ |
| #define LL_MPU_REGION_NUMBER3 ((uint32_t)0x03U) /*!< REGION Number 3 */ |
| #define LL_MPU_REGION_NUMBER4 ((uint32_t)0x04U) /*!< REGION Number 4 */ |
| #define LL_MPU_REGION_NUMBER5 ((uint32_t)0x05U) /*!< REGION Number 5 */ |
| #define LL_MPU_REGION_NUMBER6 ((uint32_t)0x06U) /*!< REGION Number 6 */ |
| #define LL_MPU_REGION_NUMBER7 ((uint32_t)0x07U) /*!< REGION Number 7 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size |
| * @{ |
| */ |
| #define LL_MPU_REGION_SIZE_32B ((uint32_t)(0x04U << MPU_RASR_SIZE_Pos)) /*!< 32B Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_64B ((uint32_t)(0x05U << MPU_RASR_SIZE_Pos)) /*!< 64B Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_128B ((uint32_t)(0x06U << MPU_RASR_SIZE_Pos)) /*!< 128B Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_256B ((uint32_t)(0x07U << MPU_RASR_SIZE_Pos)) /*!< 256B Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_512B ((uint32_t)(0x08U << MPU_RASR_SIZE_Pos)) /*!< 512B Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_1KB ((uint32_t)(0x09U << MPU_RASR_SIZE_Pos)) /*!< 1KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_2KB ((uint32_t)(0x0AU << MPU_RASR_SIZE_Pos)) /*!< 2KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_4KB ((uint32_t)(0x0BU << MPU_RASR_SIZE_Pos)) /*!< 4KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_8KB ((uint32_t)(0x0CU << MPU_RASR_SIZE_Pos)) /*!< 8KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_16KB ((uint32_t)(0x0DU << MPU_RASR_SIZE_Pos)) /*!< 16KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_32KB ((uint32_t)(0x0EU << MPU_RASR_SIZE_Pos)) /*!< 32KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_64KB ((uint32_t)(0x0FU << MPU_RASR_SIZE_Pos)) /*!< 64KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_128KB ((uint32_t)(0x10U << MPU_RASR_SIZE_Pos)) /*!< 128KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_256KB ((uint32_t)(0x11U << MPU_RASR_SIZE_Pos)) /*!< 256KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_512KB ((uint32_t)(0x12U << MPU_RASR_SIZE_Pos)) /*!< 512KB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_1MB ((uint32_t)(0x13U << MPU_RASR_SIZE_Pos)) /*!< 1MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_2MB ((uint32_t)(0x14U << MPU_RASR_SIZE_Pos)) /*!< 2MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_4MB ((uint32_t)(0x15U << MPU_RASR_SIZE_Pos)) /*!< 4MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_8MB ((uint32_t)(0x16U << MPU_RASR_SIZE_Pos)) /*!< 8MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_16MB ((uint32_t)(0x17U << MPU_RASR_SIZE_Pos)) /*!< 16MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_32MB ((uint32_t)(0x18U << MPU_RASR_SIZE_Pos)) /*!< 32MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_64MB ((uint32_t)(0x19U << MPU_RASR_SIZE_Pos)) /*!< 64MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_128MB ((uint32_t)(0x1AU << MPU_RASR_SIZE_Pos)) /*!< 128MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_256MB ((uint32_t)(0x1BU << MPU_RASR_SIZE_Pos)) /*!< 256MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_512MB ((uint32_t)(0x1CU << MPU_RASR_SIZE_Pos)) /*!< 512MB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_1GB ((uint32_t)(0x1DU << MPU_RASR_SIZE_Pos)) /*!< 1GB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_2GB ((uint32_t)(0x1EU << MPU_RASR_SIZE_Pos)) /*!< 2GB Size of the MPU protection region */ |
| #define LL_MPU_REGION_SIZE_4GB ((uint32_t)(0x1FU << MPU_RASR_SIZE_Pos)) /*!< 4GB Size of the MPU protection region */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges |
| * @{ |
| */ |
| #define LL_MPU_REGION_NO_ACCESS ((uint32_t)(0x00U << MPU_RASR_AP_Pos)) /*!< No access*/ |
| #define LL_MPU_REGION_PRIV_RW ((uint32_t)(0x01U << MPU_RASR_AP_Pos)) /*!< RW privileged (privileged access only)*/ |
| #define LL_MPU_REGION_PRIV_RW_URO ((uint32_t)(0x02U << MPU_RASR_AP_Pos)) /*!< RW privileged - RO user (Write in a user program generates a fault) */ |
| #define LL_MPU_REGION_FULL_ACCESS ((uint32_t)(0x03U << MPU_RASR_AP_Pos)) /*!< RW privileged & user (Full access) */ |
| #define LL_MPU_REGION_PRIV_RO ((uint32_t)(0x05U << MPU_RASR_AP_Pos)) /*!< RO privileged (privileged read only)*/ |
| #define LL_MPU_REGION_PRIV_RO_URO ((uint32_t)(0x06U << MPU_RASR_AP_Pos)) /*!< RO privileged & user (read only) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_TEX MPU TEX Level |
| * @{ |
| */ |
| #define LL_MPU_TEX_LEVEL0 ((uint32_t)(0x00U << MPU_RASR_TEX_Pos)) /*!< b000 for TEX bits */ |
| #define LL_MPU_TEX_LEVEL1 ((uint32_t)(0x01U << MPU_RASR_TEX_Pos)) /*!< b001 for TEX bits */ |
| #define LL_MPU_TEX_LEVEL2 ((uint32_t)(0x02U << MPU_RASR_TEX_Pos)) /*!< b010 for TEX bits */ |
| #define LL_MPU_TEX_LEVEL4 ((uint32_t)(0x04U << MPU_RASR_TEX_Pos)) /*!< b100 for TEX bits */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access |
| * @{ |
| */ |
| #define LL_MPU_INSTRUCTION_ACCESS_ENABLE ((uint32_t)0x00U) /*!< Instruction fetches enabled */ |
| #define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access |
| * @{ |
| */ |
| #define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ |
| #define LL_MPU_ACCESS_NOT_SHAREABLE ((uint32_t)0x00U) /*!< Not Shareable memory attribute */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access |
| * @{ |
| */ |
| #define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ |
| #define LL_MPU_ACCESS_NOT_CACHEABLE ((uint32_t)0x00U) /*!< Not Cacheable memory attribute */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access |
| * @{ |
| */ |
| #define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ |
| #define LL_MPU_ACCESS_NOT_BUFFERABLE ((uint32_t)0x00U) /*!< Not Bufferable memory attribute */ |
| /** |
| * @} |
| */ |
| #endif /* __MPU_PRESENT */ |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK |
| * @{ |
| */ |
| |
| /** |
| * @brief This function checks if the Systick counter flag is active or not. |
| * @note It can be used in timeout function on application side. |
| * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) |
| { |
| return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); |
| } |
| |
| /** |
| * @brief Configures the SysTick clock source |
| * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource |
| * @param Source This parameter can be one of the following values: |
| * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 |
| * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) |
| { |
| if (Source == LL_SYSTICK_CLKSOURCE_HCLK) |
| { |
| SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); |
| } |
| else |
| { |
| CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); |
| } |
| } |
| |
| /** |
| * @brief Get the SysTick clock source |
| * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 |
| * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK |
| */ |
| __STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) |
| { |
| return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); |
| } |
| |
| /** |
| * @brief Enable SysTick exception request |
| * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_SYSTICK_EnableIT(void) |
| { |
| SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); |
| } |
| |
| /** |
| * @brief Disable SysTick exception request |
| * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_SYSTICK_DisableIT(void) |
| { |
| CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); |
| } |
| |
| /** |
| * @brief Checks if the SYSTICK interrupt is enabled or disabled. |
| * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) |
| { |
| return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE |
| * @{ |
| */ |
| |
| /** |
| * @brief Processor uses sleep as its low power mode |
| * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_EnableSleep(void) |
| { |
| /* Clear SLEEPDEEP bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| } |
| |
| /** |
| * @brief Processor uses deep sleep as its low power mode |
| * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_EnableDeepSleep(void) |
| { |
| /* Set SLEEPDEEP bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| } |
| |
| /** |
| * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. |
| * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an |
| * empty main application. |
| * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) |
| { |
| /* Set SLEEPONEXIT bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); |
| } |
| |
| /** |
| * @brief Do not sleep when returning to Thread mode. |
| * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) |
| { |
| /* Clear SLEEPONEXIT bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); |
| } |
| |
| /** |
| * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the |
| * processor. |
| * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_EnableEventOnPend(void) |
| { |
| /* Set SEVEONPEND bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); |
| } |
| |
| /** |
| * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are |
| * excluded |
| * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_LPM_DisableEventOnPend(void) |
| { |
| /* Clear SEVEONPEND bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO |
| * @{ |
| */ |
| |
| /** |
| * @brief Get Implementer code |
| * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer |
| * @retval Value should be equal to 0x41 for ARM |
| */ |
| __STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) |
| { |
| return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); |
| } |
| |
| /** |
| * @brief Get Variant number (The r value in the rnpn product revision identifier) |
| * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant |
| * @retval Value between 0 and 255 (0x0: revision 0) |
| */ |
| __STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) |
| { |
| return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); |
| } |
| |
| /** |
| * @brief Get Architecture number |
| * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture |
| * @retval Value should be equal to 0xC for Cortex-M0+ devices |
| */ |
| __STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) |
| { |
| return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); |
| } |
| |
| /** |
| * @brief Get Part number |
| * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo |
| * @retval Value should be equal to 0xC60 for Cortex-M0+ |
| */ |
| __STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) |
| { |
| return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); |
| } |
| |
| /** |
| * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) |
| * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision |
| * @retval Value between 0 and 255 (0x1: patch 1) |
| */ |
| __STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) |
| { |
| return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #if __MPU_PRESENT |
| /** @defgroup CORTEX_LL_EF_MPU MPU |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable MPU with input options |
| * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable |
| * @param Options This parameter can be one of the following values: |
| * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE |
| * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI |
| * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT |
| * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MPU_Enable(uint32_t Options) |
| { |
| /* Enable the MPU*/ |
| WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); |
| /* Ensure MPU settings take effects */ |
| __DSB(); |
| /* Sequence instruction fetches using update settings */ |
| __ISB(); |
| } |
| |
| /** |
| * @brief Disable MPU |
| * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MPU_Disable(void) |
| { |
| /* Make sure outstanding transfers are done */ |
| __DMB(); |
| /* Disable MPU*/ |
| WRITE_REG(MPU->CTRL, 0U); |
| } |
| |
| /** |
| * @brief Check if MPU is enabled or not |
| * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) |
| { |
| return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); |
| } |
| |
| /** |
| * @brief Enable a MPU region |
| * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion |
| * @param Region This parameter can be one of the following values: |
| * @arg @ref LL_MPU_REGION_NUMBER0 |
| * @arg @ref LL_MPU_REGION_NUMBER1 |
| * @arg @ref LL_MPU_REGION_NUMBER2 |
| * @arg @ref LL_MPU_REGION_NUMBER3 |
| * @arg @ref LL_MPU_REGION_NUMBER4 |
| * @arg @ref LL_MPU_REGION_NUMBER5 |
| * @arg @ref LL_MPU_REGION_NUMBER6 |
| * @arg @ref LL_MPU_REGION_NUMBER7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) |
| { |
| /* Set Region number */ |
| WRITE_REG(MPU->RNR, Region); |
| /* Enable the MPU region */ |
| SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); |
| } |
| |
| /** |
| * @brief Configure and enable a region |
| * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n |
| * MPU_RBAR REGION LL_MPU_ConfigRegion\n |
| * MPU_RBAR ADDR LL_MPU_ConfigRegion\n |
| * MPU_RASR XN LL_MPU_ConfigRegion\n |
| * MPU_RASR AP LL_MPU_ConfigRegion\n |
| * MPU_RASR S LL_MPU_ConfigRegion\n |
| * MPU_RASR C LL_MPU_ConfigRegion\n |
| * MPU_RASR B LL_MPU_ConfigRegion\n |
| * MPU_RASR SIZE LL_MPU_ConfigRegion |
| * @param Region This parameter can be one of the following values: |
| * @arg @ref LL_MPU_REGION_NUMBER0 |
| * @arg @ref LL_MPU_REGION_NUMBER1 |
| * @arg @ref LL_MPU_REGION_NUMBER2 |
| * @arg @ref LL_MPU_REGION_NUMBER3 |
| * @arg @ref LL_MPU_REGION_NUMBER4 |
| * @arg @ref LL_MPU_REGION_NUMBER5 |
| * @arg @ref LL_MPU_REGION_NUMBER6 |
| * @arg @ref LL_MPU_REGION_NUMBER7 |
| * @param Address Value of region base address |
| * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF |
| * @param Attributes This parameter can be a combination of the following values: |
| * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B |
| * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB |
| * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB |
| * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB |
| * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB |
| * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB |
| * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS |
| * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO |
| * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 |
| * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE |
| * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE |
| * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE |
| * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) |
| { |
| /* Set Region number */ |
| WRITE_REG(MPU->RNR, Region); |
| /* Set base address */ |
| WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); |
| /* Configure MPU */ |
| WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos)); |
| } |
| |
| /** |
| * @brief Disable a region |
| * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n |
| * MPU_RASR ENABLE LL_MPU_DisableRegion |
| * @param Region This parameter can be one of the following values: |
| * @arg @ref LL_MPU_REGION_NUMBER0 |
| * @arg @ref LL_MPU_REGION_NUMBER1 |
| * @arg @ref LL_MPU_REGION_NUMBER2 |
| * @arg @ref LL_MPU_REGION_NUMBER3 |
| * @arg @ref LL_MPU_REGION_NUMBER4 |
| * @arg @ref LL_MPU_REGION_NUMBER5 |
| * @arg @ref LL_MPU_REGION_NUMBER6 |
| * @arg @ref LL_MPU_REGION_NUMBER7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) |
| { |
| /* Set Region number */ |
| WRITE_REG(MPU->RNR, Region); |
| /* Disable the MPU region */ |
| CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* __MPU_PRESENT */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L0xx_LL_CORTEX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |