blob: 0841553309f23cb5ad7ebc9e1857f54b0ad24746 [file] [log] [blame]
/*
* NOTE: Autogenerated file by kinetis_cfg_utils.py
* for MK64FN1M0VLL12/signal_configuration.xml
*
* Copyright (c) 2022, NXP
* SPDX-License-Identifier: Apache-2.0
*/
#include <nxp/kinetis/MK64FN1M0VLL12-pinctrl.h>
&pinctrl {
adc0_default: adc0_default {
group0 {
pinmux = <ADC0_SE14_PTC0>;
drive-strength = "low";
slew-rate = "fast";
};
};
adc1_default: adc1_default {
group0 {
pinmux = <ADC1_SE14_PTB10>;
drive-strength = "low";
slew-rate = "fast";
};
};
enet_default: enet_default {
group0 {
pinmux = <RMII0_MDIO_PTB0>;
drive-strength = "low";
drive-open-drain;
bias-pull-up;
slew-rate = "fast";
};
group1 {
pinmux = <RMII0_RXER_PTA5>,
<RMII0_RXD1_PTA12>,
<RMII0_RXD0_PTA13>,
<RMII0_CRS_DV_PTA14>,
<RMII0_TXEN_PTA15>,
<RMII0_TXD0_PTA16>,
<RMII0_TXD1_PTA17>,
<RMII0_MDC_PTB1>;
drive-strength = "low";
slew-rate = "fast";
};
};
flexcan0_default: flexcan0_default {
group0 {
pinmux = <CAN0_RX_PTB19>;
drive-strength = "low";
bias-pull-up;
slew-rate = "fast";
};
group1 {
pinmux = <CAN0_TX_PTB18>;
drive-strength = "low";
slew-rate = "fast";
};
};
ftm0_default: ftm0_default {
group0 {
pinmux = <FTM0_CH0_PTC1>;
drive-strength = "low";
slew-rate = "fast";
};
};
ftm3_default: ftm3_default {
group0 {
pinmux = <FTM3_CH4_PTC8>,
<FTM3_CH5_PTC9>;
drive-strength = "low";
slew-rate = "fast";
};
};
i2c0_default: i2c0_default {
group0 {
pinmux = <I2C0_SCL_PTE24>,
<I2C0_SDA_PTE25>;
drive-strength = "low";
drive-open-drain;
slew-rate = "fast";
};
};
/* PTC16 and PTC17 conflict with uart3 pins */
ptp_default: ptp_default {
group0 {
pinmux = <ENET0_1588_TMR0_PTC16>,
<ENET0_1588_TMR1_PTC17>,
<ENET0_1588_TMR2_PTC18>;
drive-strength = "low";
slew-rate = "fast";
};
};
/* pins conflict with uart2 */
spi0_default: spi0_default {
group0 {
pinmux = <SPI0_PCS0_PTD0>,
<SPI0_SCK_PTD1>,
<SPI0_SOUT_PTD2>,
<SPI0_SIN_PTD3>;
drive-strength = "low";
slew-rate = "fast";
};
};
uart0_default: uart0_default {
group0 {
pinmux = <UART0_RX_PTB16>,
<UART0_TX_PTB17>;
drive-strength = "low";
slew-rate = "fast";
};
};
/* pins conflict with spi0 */
uart2_default: uart2_default {
group0 {
pinmux = <UART2_CTS_b_PTD1>,
<UART2_RTS_b_PTD0>,
<UART2_RX_PTD2>,
<UART2_TX_PTD3>;
drive-strength = "low";
slew-rate = "fast";
};
};
/* PTC16 and PTC17 conflict with PTP timer pins */
uart3_default: uart3_default {
group0 {
pinmux = <UART3_RX_PTC16>,
<UART3_TX_PTC17>;
drive-strength = "low";
slew-rate = "fast";
};
};
};