Kconfig.zephyr - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 # General configuration options

 # Copyright (c) 2014-2015 Wind River Systems, Inc.
 # Copyright (c) 2016 Intel Corporation
 # SPDX-License-Identifier: Apache-2.0

 menu "Modules"

 source "$(CMAKE_BINARY_DIR)/Kconfig.modules"
 source "modules/Kconfig"

 endmenu

 # Include these first so that any properties (e.g. defaults) below can be
 # overridden in *.defconfig files (by defining symbols in multiple locations).
 # After merging all the symbol definitions, Kconfig picks the first property
 # (e.g. the first default) with a satisfied condition.
 #
 # Board defaults should be parsed before SoC defaults, because boards usually
 # overrides SoC values.
 #
 # Note: $ARCH and $BOARD_DIR might be glob patterns.
 source "$(BOARD_DIR)/Kconfig.defconfig"

 source "$(SOC_DIR)/$(ARCH)/*/Kconfig.defconfig"

 source "boards/Kconfig"

 source "$(SOC_DIR)/Kconfig"

 source "arch/Kconfig"

 source "kernel/Kconfig"

 source "dts/Kconfig"

 source "drivers/Kconfig"

 source "lib/Kconfig"

 source "subsys/Kconfig"

 source "ext/Kconfig"


 menu "Build and Link Features"

 menu "Linker Options"

 choice
 	prompt "Linker Orphan Section Handling"
 	default LINKER_ORPHAN_SECTION_WARN

 config LINKER_ORPHAN_SECTION_PLACE
 	bool "Place"
 	help
 	  Linker puts orphan sections in place without warnings
 	  or errors.

 config LINKER_ORPHAN_SECTION_WARN
 	bool "Warn"
 	help
 	  Linker places the orphan sections in output and issues
 	  warning about those sections.

 config LINKER_ORPHAN_SECTION_ERROR
 	bool "Error"
 	help
 	  Linker exits with error when an orphan section is found.

 endchoice

 config CODE_DATA_RELOCATION
 	bool "Relocate code/data sections"
 	depends on ARM
 	help
 	  When selected this will relocate .text, data and .bss sections from
 	  the specified files and places it in the required memory region. The
 	  files should be specified in the CMakeList.txt file with
 	  a cmake API zephyr_code_relocate().

 config HAS_FLASH_LOAD_OFFSET
 	bool
 	help
 	  This option is selected by targets having a FLASH_LOAD_OFFSET
 	  and FLASH_LOAD_SIZE.

 config USE_CODE_PARTITION
 	bool "link into code-partition"
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
 	  When selected application will be linked into chosen code-partition.

 # Workaround for not being able to have commas in macro arguments
 DT_CHOSEN_Z_CODE_PARTITION := zephyr,code-partition

 config FLASH_LOAD_OFFSET
 	hex "Kernel load offset"
 	default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
 	default 0
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
 	  This option specifies the byte offset from the beginning of flash that
 	  the kernel should be loaded into. Changing this value from zero will
 	  affect the Zephyr image's link, and will decrease the total amount of
 	  flash available for use by application code.

 	  If unsure, leave at the default value 0.

 config FLASH_LOAD_SIZE
 	hex "Kernel load size"
 	default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
 	default 0
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
 	  If non-zero, this option specifies the size, in bytes, of the flash
 	  area that the Zephyr image will be allowed to occupy.  If zero, the
 	  image will be able to occupy from the FLASH_LOAD_OFFSET to the end of
 	  the device.

 	  If unsure, leave at the default value 0.

 config TEXT_SECTION_OFFSET
 	hex
 	prompt "TEXT section offset" if !BOOTLOADER_MCUBOOT
 	default 0x200 if BOOTLOADER_MCUBOOT
 	default 0
 	help
 	  If the application is built for chain-loading by a bootloader this
 	  variable is required to be set to value that leaves sufficient
 	  space between the beginning of the image and the start of the .text
 	  section to store an image header or any other metadata.
 	  In the particular case of the MCUboot bootloader this reserves enough
 	  space to store the image header, which should also meet vector table
 	  alignment requirements on most ARM targets, although some targets
 	  may require smaller or larger values.

 config HAVE_CUSTOM_LINKER_SCRIPT
 	bool "Custom linker scripts provided"
 	help
 	  Set this option if you have a custom linker script which needed to
 	  be define in CUSTOM_LINKER_SCRIPT.

 config CUSTOM_LINKER_SCRIPT
 	string "Path to custom linker script"
 	depends on HAVE_CUSTOM_LINKER_SCRIPT
 	help
 	  Path to the linker script to be used instead of the one define by the
 	  board.

 	  The linker script must be based on a version provided by Zephyr since
 	  the kernel can expect a certain layout/certain regions.

 	  This is useful when an application needs to add sections into the
 	  linker script and avoid having to change the script provided by
 	  Zephyr.

 config CUSTOM_RODATA_LD
 	bool "(DEPRECATED) Include custom-rodata.ld"
 	help
 	  Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
 	  Include a customized linker script fragment for inserting additional
 	  data and linker directives into the rodata section.

 config CUSTOM_RWDATA_LD
 	bool "(DEPRECATED) Include custom-rwdata.ld"
 	help
 	  Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
 	  Include a customized linker script fragment for inserting additional
 	  data and linker directives into the data section.

 config CUSTOM_SECTIONS_LD
 	bool "(DEPRECATED) Include custom-sections.ld"
 	help
 	  Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
 	  Include a customized linker script fragment for inserting additional
 	  arbitrary sections.

 config KERNEL_ENTRY
 	string "Kernel entry symbol"
 	default "__start"
 	help
 	  Code entry symbol, to be set at linking phase.

 config LINKER_SORT_BY_ALIGNMENT
 	bool "Sort input sections by alignment"
 	default y
 	help
 	  This turns on the linker flag to sort sections by alignment
 	  in decreasing size of symbols. This helps to minimize
 	  padding between symbols.

 endmenu

 menu "Compiler Options"

 config NATIVE_APPLICATION
 	bool "Build as a native host application"
 	help
 	  Build as a native application that can run on the host and using
 	  resources and libraries provided by the host.

 choice
 	prompt "Optimization level"
 	default NO_OPTIMIZATIONS    if COVERAGE
 	default DEBUG_OPTIMIZATIONS if DEBUG
 	default SIZE_OPTIMIZATIONS
 	help
 	  Note that these flags shall only control the compiler
 	  optimization level, and that no extra debug code shall be
 	  conditionally compiled based on them.

 config SIZE_OPTIMIZATIONS
 	bool "Optimize for size"
 	help
 	  Compiler optimizations will be set to -Os independently of other
 	  options.

 config SPEED_OPTIMIZATIONS
 	bool "Optimize for speed"
 	help
 	  Compiler optimizations will be set to -O2 independently of other
 	  options.

 config DEBUG_OPTIMIZATIONS
 	bool "Optimize debugging experience"
 	help
 	  Compiler optimizations will be set to -Og independently of other
 	  options.

 config NO_OPTIMIZATIONS
 	bool "Optimize nothing"
 	help
 	  Compiler optimizations will be set to -O0 independently of other
 	  options.

 endchoice

 config COMPILER_OPT
 	string "Custom compiler options"
 	help
 	  This option is a free-form string that is passed to the compiler
 	  when building all parts of a project (i.e. kernel).
 	  The compiler options specified by this string supplement the
 	  predefined set of compiler supplied by the build system,
 	  and can be used to change compiler optimization, warning and error
 	  messages, and so on.

 endmenu

 menu "Build Options"

 config KERNEL_BIN_NAME
 	string "The kernel binary name"
 	default "zephyr"
 	help
 	  This option sets the name of the generated kernel binary.

 config OUTPUT_STAT
 	bool "Create a statistics file"
 	default y
 	help
 	  Create a stat file using readelf -e <elf>

 config OUTPUT_DISASSEMBLY
 	bool "Create a disassembly file"
 	default y
 	help
 	  Create an .lst file with the assembly listing of the firmware.

 config OUTPUT_PRINT_MEMORY_USAGE
 	bool "Print memory usage to stdout"
 	default y
 	help
 	  If the toolchain supports it, this option will pass
 	  --print-memory-region to the linker when it is doing it's first
 	  linker pass. Note that the memory regions are symbolic concepts
 	  defined by the linker scripts and do not necessarily map
 	  directly to the real physical address space. Take also note that
 	  some platforms do two passes of the linker so the results do not
 	  match exactly to the final elf file. See also rom_report,
 	  ram_report and
 	  https://sourceware.org/binutils/docs/ld/MEMORY.html

 config BUILD_OUTPUT_HEX
 	bool "Build a binary in HEX format"
 	help
 	  Build a binary in HEX format. This will build a zephyr.hex file need
 	  by some platforms.

 config BUILD_OUTPUT_BIN
 	bool "Build a binary in BIN format"
 	default y
 	help
 	  Build a binary in BIN format. This will build a zephyr.bin file need
 	  by some platforms.

 config BUILD_OUTPUT_EXE
 	bool "Build a binary in ELF format with .exe extension"
 	help
 	  Build a binary in ELF format that can run in the host system. This
 	  will build a zephyr.exe file.

 config BUILD_OUTPUT_S19
 	bool "Build a binary in S19 format"
 	help
 	  Build a binary in S19 format. This will build a zephyr.s19 file need
 	  by some platforms.

 config BUILD_NO_GAP_FILL
 	bool "Don't fill gaps in generated hex/bin/s19 files."
 	depends on BUILD_OUTPUT_HEX || BUILD_OUTPUT_BIN || BUILD_OUTPUT_S19

 config BUILD_OUTPUT_STRIPPED
 	bool "Build a stripped binary"
 	help
 	  Build a stripped binary. This will build a zephyr.stripped file need
 	  by some platforms.

 config APPLICATION_DEFINED_SYSCALL
 	bool "Scan application folder for any syscall definition"
 	help
 	  Scan additional folders inside application source folder
 	  for application defined syscalls.

 endmenu
 endmenu


 menu "Boot Options"

 config IS_BOOTLOADER
 	bool "Act as a bootloader"
 	depends on XIP
 	depends on ARM
 	help
 	  This option indicates that Zephyr will act as a bootloader to execute
 	  a separate Zephyr image payload.

 config BOOTLOADER_SRAM_SIZE
 	int "SRAM reserved for bootloader"
 	default 16
 	depends on !XIP || IS_BOOTLOADER
 	depends on ARM || XTENSA
 	help
 	  This option specifies the amount of SRAM (measure in kB) reserved for
 	  a bootloader image, when either:
 	  - the Zephyr image itself is to act as the bootloader, or
 	  - Zephyr is a !XIP image, which implicitly assumes existence of a
 	  bootloader that loads the Zephyr !XIP image onto SRAM.

 config BOOTLOADER_MCUBOOT
 	bool "MCUboot bootloader support"
 	select USE_CODE_PARTITION
 	help
 	  This option signifies that the target uses MCUboot as a bootloader,
 	  or in other words that the image is to be chain-loaded by MCUboot.
 	  This sets several required build system and Device Tree options in
 	  order for the image generated to be bootable using the MCUboot open
 	  source bootloader. Currently this includes:

 	    * Setting TEXT_SECTION_OFFSET to a default value that allows space
 	      for the MCUboot image header
 	    * Activating SW_VECTOR_RELAY on Cortex-M0 (or Armv8-M baseline)
 	      targets with no built-in vector relocation mechanisms
 	    * Including dts/common/mcuboot.overlay when building the Device
 	      Tree in order to place and link the image at the slot0 offset

 config BOOTLOADER_ESP_IDF
 	bool "ESP-IDF bootloader support"
 	depends on SOC_ESP32
 	help
 	  This option will trigger the compilation of the ESP-IDF bootloader
 	  inside the build folder.
 	  At flash time, the bootloader will be flashed with the zephyr image

 config BOOTLOADER_KEXEC
 	bool "Boot using Linux kexec() system call"
 	depends on X86
 	help
 	  This option signifies that Linux boots the kernel using kexec system call
 	  and utility. This method is used to boot the kernel over the network.

 config BOOTLOADER_CONTEXT_RESTORE
 	bool "Boot loader has context restore support"
 	default y
 	depends on SYS_POWER_DEEP_SLEEP_STATES && BOOTLOADER_CONTEXT_RESTORE_SUPPORTED
 	help
 	  This option signifies that the target has a bootloader
 	  that restores CPU context upon resuming from deep sleep
 	  power state.

 config REBOOT
 	bool "Reboot functionality"
 	select SYSTEM_CLOCK_DISABLE
 	help
 	  Enable the sys_reboot() API. Enabling this can drag in other subsystems
 	  needed to perform a "safe" reboot (e.g. SYSTEM_CLOCK_DISABLE, to stop the
 	  system clock before issuing a reset).

 config MISRA_SANE
 	bool "MISRA standards compliance features"
 	help
 	  Causes the source code to build in "MISRA" mode, which
 	  disallows some otherwise-permitted features of the C
 	  standard for safety reasons.  Specifically variable length
 	  arrays are not permitted (and gcc will enforce this).

 endmenu


 menu "Compatibility"

 config COMPAT_INCLUDES
 	bool "Suppress warnings when using header shims"
 	default y
 	help
 	  Suppress any warnings from the pre-processor when including
 	  deprecated header files.

 endmenu
	# General configuration options

	# Copyright (c) 2014-2015 Wind River Systems, Inc.
	# Copyright (c) 2016 Intel Corporation
	# SPDX-License-Identifier: Apache-2.0

	menu "Modules"

	source "$(CMAKE_BINARY_DIR)/Kconfig.modules"
	source "modules/Kconfig"

	endmenu

	# Include these first so that any properties (e.g. defaults) below can be
	# overridden in *.defconfig files (by defining symbols in multiple locations).
	# After merging all the symbol definitions, Kconfig picks the first property
	# (e.g. the first default) with a satisfied condition.
	#
	# Board defaults should be parsed before SoC defaults, because boards usually
	# overrides SoC values.
	#
	# Note: $ARCH and $BOARD_DIR might be glob patterns.
	source "$(BOARD_DIR)/Kconfig.defconfig"

	source "$(SOC_DIR)/$(ARCH)/*/Kconfig.defconfig"

	source "boards/Kconfig"

	source "$(SOC_DIR)/Kconfig"

	source "arch/Kconfig"

	source "kernel/Kconfig"

	source "dts/Kconfig"

	source "drivers/Kconfig"

	source "lib/Kconfig"

	source "subsys/Kconfig"

	source "ext/Kconfig"


	menu "Build and Link Features"

	menu "Linker Options"

	choice
	prompt "Linker Orphan Section Handling"
	default LINKER_ORPHAN_SECTION_WARN

	config LINKER_ORPHAN_SECTION_PLACE
	bool "Place"
	help
	Linker puts orphan sections in place without warnings
	or errors.

	config LINKER_ORPHAN_SECTION_WARN
	bool "Warn"
	help
	Linker places the orphan sections in output and issues
	warning about those sections.

	config LINKER_ORPHAN_SECTION_ERROR
	bool "Error"
	help
	Linker exits with error when an orphan section is found.

	endchoice

	config CODE_DATA_RELOCATION
	bool "Relocate code/data sections"
	depends on ARM
	help
	When selected this will relocate .text, data and .bss sections from
	the specified files and places it in the required memory region. The
	files should be specified in the CMakeList.txt file with
	a cmake API zephyr_code_relocate().

	config HAS_FLASH_LOAD_OFFSET
	bool
	help
	This option is selected by targets having a FLASH_LOAD_OFFSET
	and FLASH_LOAD_SIZE.

	config USE_CODE_PARTITION
	bool "link into code-partition"
	depends on HAS_FLASH_LOAD_OFFSET
	help
	When selected application will be linked into chosen code-partition.

	# Workaround for not being able to have commas in macro arguments
	DT_CHOSEN_Z_CODE_PARTITION := zephyr,code-partition

	config FLASH_LOAD_OFFSET
	hex "Kernel load offset"
	default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
	default 0
	depends on HAS_FLASH_LOAD_OFFSET
	help
	This option specifies the byte offset from the beginning of flash that
	the kernel should be loaded into. Changing this value from zero will
	affect the Zephyr image's link, and will decrease the total amount of
	flash available for use by application code.

	If unsure, leave at the default value 0.

	config FLASH_LOAD_SIZE
	hex "Kernel load size"
	default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
	default 0
	depends on HAS_FLASH_LOAD_OFFSET
	help
	If non-zero, this option specifies the size, in bytes, of the flash
	area that the Zephyr image will be allowed to occupy. If zero, the
	image will be able to occupy from the FLASH_LOAD_OFFSET to the end of
	the device.

	If unsure, leave at the default value 0.

	config TEXT_SECTION_OFFSET
	hex
	prompt "TEXT section offset" if !BOOTLOADER_MCUBOOT
	default 0x200 if BOOTLOADER_MCUBOOT
	default 0
	help
	If the application is built for chain-loading by a bootloader this
	variable is required to be set to value that leaves sufficient
	space between the beginning of the image and the start of the .text
	section to store an image header or any other metadata.
	In the particular case of the MCUboot bootloader this reserves enough
	space to store the image header, which should also meet vector table
	alignment requirements on most ARM targets, although some targets
	may require smaller or larger values.

	config HAVE_CUSTOM_LINKER_SCRIPT
	bool "Custom linker scripts provided"
	help
	Set this option if you have a custom linker script which needed to
	be define in CUSTOM_LINKER_SCRIPT.

	config CUSTOM_LINKER_SCRIPT
	string "Path to custom linker script"
	depends on HAVE_CUSTOM_LINKER_SCRIPT
	help
	Path to the linker script to be used instead of the one define by the
	board.

	The linker script must be based on a version provided by Zephyr since
	the kernel can expect a certain layout/certain regions.

	This is useful when an application needs to add sections into the
	linker script and avoid having to change the script provided by
	Zephyr.

	config CUSTOM_RODATA_LD
	bool "(DEPRECATED) Include custom-rodata.ld"
	help
	Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
	Include a customized linker script fragment for inserting additional
	data and linker directives into the rodata section.

	config CUSTOM_RWDATA_LD
	bool "(DEPRECATED) Include custom-rwdata.ld"
	help
	Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
	Include a customized linker script fragment for inserting additional
	data and linker directives into the data section.

	config CUSTOM_SECTIONS_LD
	bool "(DEPRECATED) Include custom-sections.ld"
	help
	Note: This is deprecated, use Cmake function zephyr_linker_sources() instead.
	Include a customized linker script fragment for inserting additional
	arbitrary sections.

	config KERNEL_ENTRY
	string "Kernel entry symbol"
	default "__start"
	help
	Code entry symbol, to be set at linking phase.

	config LINKER_SORT_BY_ALIGNMENT
	bool "Sort input sections by alignment"
	default y
	help
	This turns on the linker flag to sort sections by alignment
	in decreasing size of symbols. This helps to minimize
	padding between symbols.

	endmenu

	menu "Compiler Options"

	config NATIVE_APPLICATION
	bool "Build as a native host application"
	help
	Build as a native application that can run on the host and using
	resources and libraries provided by the host.

	choice
	prompt "Optimization level"
	default NO_OPTIMIZATIONS if COVERAGE
	default DEBUG_OPTIMIZATIONS if DEBUG
	default SIZE_OPTIMIZATIONS
	help
	Note that these flags shall only control the compiler
	optimization level, and that no extra debug code shall be
	conditionally compiled based on them.

	config SIZE_OPTIMIZATIONS
	bool "Optimize for size"
	help
	Compiler optimizations will be set to -Os independently of other
	options.

	config SPEED_OPTIMIZATIONS
	bool "Optimize for speed"
	help
	Compiler optimizations will be set to -O2 independently of other
	options.

	config DEBUG_OPTIMIZATIONS
	bool "Optimize debugging experience"
	help
	Compiler optimizations will be set to -Og independently of other
	options.

	config NO_OPTIMIZATIONS
	bool "Optimize nothing"
	help
	Compiler optimizations will be set to -O0 independently of other
	options.

	endchoice

	config COMPILER_OPT
	string "Custom compiler options"
	help
	This option is a free-form string that is passed to the compiler
	when building all parts of a project (i.e. kernel).
	The compiler options specified by this string supplement the
	predefined set of compiler supplied by the build system,
	and can be used to change compiler optimization, warning and error
	messages, and so on.

	endmenu

	menu "Build Options"

	config KERNEL_BIN_NAME
	string "The kernel binary name"
	default "zephyr"
	help
	This option sets the name of the generated kernel binary.

	config OUTPUT_STAT
	bool "Create a statistics file"
	default y
	help
	Create a stat file using readelf -e <elf>

	config OUTPUT_DISASSEMBLY
	bool "Create a disassembly file"
	default y
	help
	Create an .lst file with the assembly listing of the firmware.

	config OUTPUT_PRINT_MEMORY_USAGE
	bool "Print memory usage to stdout"
	default y
	help
	If the toolchain supports it, this option will pass
	--print-memory-region to the linker when it is doing it's first
	linker pass. Note that the memory regions are symbolic concepts
	defined by the linker scripts and do not necessarily map
	directly to the real physical address space. Take also note that
	some platforms do two passes of the linker so the results do not
	match exactly to the final elf file. See also rom_report,
	ram_report and
	https://sourceware.org/binutils/docs/ld/MEMORY.html

	config BUILD_OUTPUT_HEX
	bool "Build a binary in HEX format"
	help
	Build a binary in HEX format. This will build a zephyr.hex file need
	by some platforms.

	config BUILD_OUTPUT_BIN
	bool "Build a binary in BIN format"
	default y
	help
	Build a binary in BIN format. This will build a zephyr.bin file need
	by some platforms.

	config BUILD_OUTPUT_EXE
	bool "Build a binary in ELF format with .exe extension"
	help
	Build a binary in ELF format that can run in the host system. This
	will build a zephyr.exe file.

	config BUILD_OUTPUT_S19
	bool "Build a binary in S19 format"
	help
	Build a binary in S19 format. This will build a zephyr.s19 file need
	by some platforms.

	config BUILD_NO_GAP_FILL
	bool "Don't fill gaps in generated hex/bin/s19 files."
	depends on BUILD_OUTPUT_HEX \|\| BUILD_OUTPUT_BIN \|\| BUILD_OUTPUT_S19

	config BUILD_OUTPUT_STRIPPED
	bool "Build a stripped binary"
	help
	Build a stripped binary. This will build a zephyr.stripped file need
	by some platforms.

	config APPLICATION_DEFINED_SYSCALL
	bool "Scan application folder for any syscall definition"
	help
	Scan additional folders inside application source folder
	for application defined syscalls.

	endmenu
	endmenu


	menu "Boot Options"

	config IS_BOOTLOADER
	bool "Act as a bootloader"
	depends on XIP
	depends on ARM
	help
	This option indicates that Zephyr will act as a bootloader to execute
	a separate Zephyr image payload.

	config BOOTLOADER_SRAM_SIZE
	int "SRAM reserved for bootloader"
	default 16
	depends on !XIP \|\| IS_BOOTLOADER
	depends on ARM \|\| XTENSA
	help
	This option specifies the amount of SRAM (measure in kB) reserved for
	a bootloader image, when either:
	- the Zephyr image itself is to act as the bootloader, or
	- Zephyr is a !XIP image, which implicitly assumes existence of a
	bootloader that loads the Zephyr !XIP image onto SRAM.

	config BOOTLOADER_MCUBOOT
	bool "MCUboot bootloader support"
	select USE_CODE_PARTITION
	help
	This option signifies that the target uses MCUboot as a bootloader,
	or in other words that the image is to be chain-loaded by MCUboot.
	This sets several required build system and Device Tree options in
	order for the image generated to be bootable using the MCUboot open
	source bootloader. Currently this includes:

	* Setting TEXT_SECTION_OFFSET to a default value that allows space
	for the MCUboot image header
	* Activating SW_VECTOR_RELAY on Cortex-M0 (or Armv8-M baseline)
	targets with no built-in vector relocation mechanisms
	* Including dts/common/mcuboot.overlay when building the Device
	Tree in order to place and link the image at the slot0 offset

	config BOOTLOADER_ESP_IDF
	bool "ESP-IDF bootloader support"
	depends on SOC_ESP32
	help
	This option will trigger the compilation of the ESP-IDF bootloader
	inside the build folder.
	At flash time, the bootloader will be flashed with the zephyr image

	config BOOTLOADER_KEXEC
	bool "Boot using Linux kexec() system call"
	depends on X86
	help
	This option signifies that Linux boots the kernel using kexec system call
	and utility. This method is used to boot the kernel over the network.

	config BOOTLOADER_CONTEXT_RESTORE
	bool "Boot loader has context restore support"
	default y
	depends on SYS_POWER_DEEP_SLEEP_STATES && BOOTLOADER_CONTEXT_RESTORE_SUPPORTED
	help
	This option signifies that the target has a bootloader
	that restores CPU context upon resuming from deep sleep
	power state.

	config REBOOT
	bool "Reboot functionality"
	select SYSTEM_CLOCK_DISABLE
	help
	Enable the sys_reboot() API. Enabling this can drag in other subsystems
	needed to perform a "safe" reboot (e.g. SYSTEM_CLOCK_DISABLE, to stop the
	system clock before issuing a reset).

	config MISRA_SANE
	bool "MISRA standards compliance features"
	help
	Causes the source code to build in "MISRA" mode, which
	disallows some otherwise-permitted features of the C
	standard for safety reasons. Specifically variable length
	arrays are not permitted (and gcc will enforce this).

	endmenu


	menu "Compatibility"

	config COMPAT_INCLUDES
	bool "Suppress warnings when using header shims"
	default y
	help
	Suppress any warnings from the pre-processor when including
	deprecated header files.

	endmenu