| /* |
| * Copyright (c) 2019 Jan Van Winkel <jan.van_winkel@dxplore.eu> |
| * Copyright 2023 NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <errno.h> |
| |
| #include "lvgl_display.h" |
| |
| #ifdef CONFIG_LV_Z_FLUSH_THREAD |
| |
| K_SEM_DEFINE(flush_complete, 0, 1); |
| /* Message queue will only ever need to queue one message */ |
| K_MSGQ_DEFINE(flush_queue, sizeof(struct lvgl_display_flush), 1, 1); |
| |
| void lvgl_flush_thread_entry(void *arg1, void *arg2, void *arg3) |
| { |
| struct lvgl_display_flush flush; |
| struct lvgl_disp_data *data; |
| |
| while (1) { |
| k_msgq_get(&flush_queue, &flush, K_FOREVER); |
| data = (struct lvgl_disp_data *)flush.disp_drv->user_data; |
| |
| flush.desc.frame_incomplete = !lv_disp_flush_is_last(flush.disp_drv); |
| display_write(data->display_dev, flush.x, flush.y, &flush.desc, |
| flush.buf); |
| |
| lv_disp_flush_ready(flush.disp_drv); |
| k_sem_give(&flush_complete); |
| } |
| } |
| |
| K_THREAD_DEFINE(lvgl_flush_thread, CONFIG_LV_Z_FLUSH_THREAD_STACK_SIZE, |
| lvgl_flush_thread_entry, NULL, NULL, NULL, |
| K_PRIO_COOP(CONFIG_LV_Z_FLUSH_THREAD_PRIO), 0, 0); |
| |
| |
| void lvgl_wait_cb(lv_disp_drv_t *disp_drv) |
| { |
| k_sem_take(&flush_complete, K_FOREVER); |
| } |
| |
| #endif /* CONFIG_LV_Z_FLUSH_THREAD */ |
| |
| #ifdef CONFIG_LV_Z_USE_ROUNDER_CB |
| void lvgl_rounder_cb(lv_disp_drv_t *disp_drv, lv_area_t *area) |
| { |
| #if CONFIG_LV_Z_AREA_X_ALIGNMENT_WIDTH != 1 |
| __ASSERT(POPCOUNT(CONFIG_LV_Z_AREA_X_ALIGNMENT_WIDTH) == 1, "Invalid X alignment width"); |
| |
| area->x1 &= ~(CONFIG_LV_Z_AREA_X_ALIGNMENT_WIDTH - 1); |
| area->x2 |= (CONFIG_LV_Z_AREA_X_ALIGNMENT_WIDTH - 1); |
| #endif |
| #if CONFIG_LV_Z_AREA_Y_ALIGNMENT_WIDTH != 1 |
| __ASSERT(POPCOUNT(CONFIG_LV_Z_AREA_Y_ALIGNMENT_WIDTH) == 1, "Invalid Y alignment width"); |
| |
| area->y1 &= ~(CONFIG_LV_Z_AREA_Y_ALIGNMENT_WIDTH - 1); |
| area->y2 |= (CONFIG_LV_Z_AREA_Y_ALIGNMENT_WIDTH - 1); |
| #endif |
| } |
| #else |
| #define lvgl_rounder_cb NULL |
| #endif |
| |
| int set_lvgl_rendering_cb(lv_disp_drv_t *disp_drv) |
| { |
| int err = 0; |
| struct lvgl_disp_data *data = (struct lvgl_disp_data *)disp_drv->user_data; |
| |
| #ifdef CONFIG_LV_Z_FLUSH_THREAD |
| disp_drv->wait_cb = lvgl_wait_cb; |
| #endif |
| |
| switch (data->cap.current_pixel_format) { |
| case PIXEL_FORMAT_ARGB_8888: |
| disp_drv->flush_cb = lvgl_flush_cb_32bit; |
| disp_drv->rounder_cb = lvgl_rounder_cb; |
| #ifdef CONFIG_LV_COLOR_DEPTH_32 |
| disp_drv->set_px_cb = NULL; |
| #else |
| disp_drv->set_px_cb = lvgl_set_px_cb_32bit; |
| #endif |
| break; |
| case PIXEL_FORMAT_RGB_888: |
| disp_drv->flush_cb = lvgl_flush_cb_24bit; |
| disp_drv->rounder_cb = lvgl_rounder_cb; |
| disp_drv->set_px_cb = lvgl_set_px_cb_24bit; |
| break; |
| case PIXEL_FORMAT_RGB_565: |
| case PIXEL_FORMAT_BGR_565: |
| disp_drv->flush_cb = lvgl_flush_cb_16bit; |
| disp_drv->rounder_cb = lvgl_rounder_cb; |
| #ifdef CONFIG_LV_COLOR_DEPTH_16 |
| disp_drv->set_px_cb = NULL; |
| #else |
| disp_drv->set_px_cb = lvgl_set_px_cb_16bit; |
| #endif |
| break; |
| case PIXEL_FORMAT_MONO01: |
| case PIXEL_FORMAT_MONO10: |
| disp_drv->flush_cb = lvgl_flush_cb_mono; |
| disp_drv->rounder_cb = lvgl_rounder_cb_mono; |
| disp_drv->set_px_cb = lvgl_set_px_cb_mono; |
| break; |
| default: |
| disp_drv->flush_cb = NULL; |
| disp_drv->rounder_cb = NULL; |
| disp_drv->set_px_cb = NULL; |
| err = -ENOTSUP; |
| break; |
| } |
| |
| return err; |
| } |
| |
| void lvgl_flush_display(struct lvgl_display_flush *request) |
| { |
| #ifdef CONFIG_LV_Z_FLUSH_THREAD |
| /* |
| * LVGL will only start a flush once the previous one is complete, |
| * so we can reset the flush state semaphore here. |
| */ |
| k_sem_reset(&flush_complete); |
| k_msgq_put(&flush_queue, request, K_FOREVER); |
| /* Explicitly yield, in case the calling thread is a cooperative one */ |
| k_yield(); |
| #else |
| /* Write directly to the display */ |
| struct lvgl_disp_data *data = |
| (struct lvgl_disp_data *)request->disp_drv->user_data; |
| |
| request->desc.frame_incomplete = !lv_disp_flush_is_last(request->disp_drv); |
| display_write(data->display_dev, request->x, request->y, |
| &request->desc, request->buf); |
| lv_disp_flush_ready(request->disp_drv); |
| #endif |
| } |