| /* att.c - Attribute protocol handling */ |
| |
| /* |
| * Copyright (c) 2015-2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/sys/util.h> |
| |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/uuid.h> |
| #include <zephyr/bluetooth/att.h> |
| #include <zephyr/bluetooth/gatt.h> |
| #include <zephyr/drivers/bluetooth/hci_driver.h> |
| |
| #include "common/bt_str.h" |
| |
| #include "hci_core.h" |
| #include "conn_internal.h" |
| #include "l2cap_internal.h" |
| #include "smp.h" |
| #include "att_internal.h" |
| #include "gatt_internal.h" |
| |
| #define LOG_LEVEL CONFIG_BT_ATT_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_att); |
| |
| #define ATT_CHAN(_ch) CONTAINER_OF(_ch, struct bt_att_chan, chan.chan) |
| #define ATT_REQ(_node) CONTAINER_OF(_node, struct bt_att_req, node) |
| |
| #define ATT_CMD_MASK 0x40 |
| |
| #if defined(CONFIG_BT_EATT) |
| #define ATT_CHAN_MAX (CONFIG_BT_EATT_MAX + 1) |
| #else |
| #define ATT_CHAN_MAX 1 |
| #endif /* CONFIG_BT_EATT */ |
| |
| typedef enum __packed { |
| ATT_COMMAND, |
| ATT_REQUEST, |
| ATT_RESPONSE, |
| ATT_NOTIFICATION, |
| ATT_CONFIRMATION, |
| ATT_INDICATION, |
| ATT_UNKNOWN, |
| } att_type_t; |
| |
| static att_type_t att_op_get_type(uint8_t op); |
| |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| struct bt_attr_data { |
| uint16_t handle; |
| uint16_t offset; |
| }; |
| |
| /* Pool for incoming ATT packets */ |
| NET_BUF_POOL_DEFINE(prep_pool, CONFIG_BT_ATT_PREPARE_COUNT, BT_ATT_BUF_SIZE, |
| sizeof(struct bt_attr_data), NULL); |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT */ |
| |
| K_MEM_SLAB_DEFINE(req_slab, sizeof(struct bt_att_req), |
| CONFIG_BT_ATT_TX_COUNT, __alignof__(struct bt_att_req)); |
| |
| enum { |
| ATT_CONNECTED, |
| ATT_ENHANCED, |
| ATT_PENDING_SENT, |
| ATT_OUT_OF_SYNC_SENT, |
| |
| /* Total number of flags - must be at the end of the enum */ |
| ATT_NUM_FLAGS, |
| }; |
| |
| struct bt_att_tx_meta_data; |
| typedef void (*bt_att_tx_cb_t)(struct bt_conn *conn, |
| struct bt_att_tx_meta_data *user_data); |
| |
| struct bt_att_tx_meta_data { |
| int err; |
| uint8_t opcode; |
| uint16_t attr_count; |
| struct bt_att_chan *att_chan; |
| bt_gatt_complete_func_t func; |
| void *user_data; |
| enum bt_att_chan_opt chan_opt; |
| }; |
| |
| struct bt_att_tx_meta { |
| struct bt_att_tx_meta_data *data; |
| }; |
| |
| /* ATT channel specific data */ |
| struct bt_att_chan { |
| /* Connection this channel is associated with */ |
| struct bt_att *att; |
| struct bt_l2cap_le_chan chan; |
| ATOMIC_DEFINE(flags, ATT_NUM_FLAGS); |
| struct bt_att_req *req; |
| struct k_fifo tx_queue; |
| struct k_work_delayable timeout_work; |
| sys_snode_t node; |
| }; |
| |
| static bool bt_att_is_enhanced(struct bt_att_chan *chan) |
| { |
| /* Optimization. */ |
| if (!IS_ENABLED(CONFIG_BT_EATT)) { |
| return false; |
| } |
| |
| return atomic_test_bit(chan->flags, ATT_ENHANCED); |
| } |
| |
| static uint16_t bt_att_mtu(struct bt_att_chan *chan) |
| { |
| /* Core v5.3 Vol 3 Part F 3.4.2: |
| * |
| * The server and client shall set ATT_MTU to the minimum of the |
| * Client Rx MTU and the Server Rx MTU. |
| */ |
| return MIN(chan->chan.rx.mtu, chan->chan.tx.mtu); |
| } |
| |
| /* Descriptor of application-specific authorization callbacks that are used |
| * with the CONFIG_BT_GATT_AUTHORIZATION_CUSTOM Kconfig enabled. |
| */ |
| const static struct bt_gatt_authorization_cb *authorization_cb; |
| |
| /* ATT connection specific data */ |
| struct bt_att { |
| struct bt_conn *conn; |
| /* Shared request queue */ |
| sys_slist_t reqs; |
| struct k_fifo tx_queue; |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| sys_slist_t prep_queue; |
| #endif |
| /* Contains bt_att_chan instance(s) */ |
| sys_slist_t chans; |
| #if defined(CONFIG_BT_EATT) |
| struct { |
| struct k_work_delayable connection_work; |
| uint8_t chans_to_connect; |
| |
| uint16_t prev_conn_rsp_result; |
| uint16_t prev_conn_req_result; |
| uint8_t prev_conn_req_missing_chans; |
| } eatt; |
| #endif /* CONFIG_BT_EATT */ |
| }; |
| |
| K_MEM_SLAB_DEFINE(att_slab, sizeof(struct bt_att), |
| CONFIG_BT_MAX_CONN, __alignof__(struct bt_att)); |
| K_MEM_SLAB_DEFINE(chan_slab, sizeof(struct bt_att_chan), |
| CONFIG_BT_MAX_CONN * ATT_CHAN_MAX, |
| __alignof__(struct bt_att_chan)); |
| static struct bt_att_req cancel; |
| |
| /** The thread ATT response handlers likely run on. |
| * |
| * Blocking this thread while waiting for an ATT request to resolve can cause a |
| * deadlock. |
| * |
| * This can happen if the application queues ATT requests in the context of a |
| * callback from the Bluetooth stack. This is because queuing an ATT request |
| * will block until a request-resource is available, and the callbacks run on |
| * the same thread as the ATT response handler that frees request-resources. |
| * |
| * The intended use of this value is to detect the above situation. |
| */ |
| static k_tid_t att_handle_rsp_thread; |
| |
| static struct bt_att_tx_meta_data tx_meta_data_storage[CONFIG_BT_ATT_TX_COUNT]; |
| |
| struct bt_att_tx_meta_data *bt_att_get_tx_meta_data(const struct net_buf *buf); |
| static void att_on_sent_cb(struct bt_att_tx_meta_data *meta); |
| |
| #if defined(CONFIG_BT_ATT_ERR_TO_STR) |
| const char *bt_att_err_to_str(uint8_t att_err) |
| { |
| /* To mapping tables are used to avoid a big gap with NULL-entries. */ |
| #define ATT_ERR(err) [err] = #err |
| #define ATT_ERR_SECOND(err) [err - BT_ATT_ERR_WRITE_REQ_REJECTED] = #err |
| |
| const char * const first_mapping_table[] = { |
| ATT_ERR(BT_ATT_ERR_SUCCESS), |
| ATT_ERR(BT_ATT_ERR_INVALID_HANDLE), |
| ATT_ERR(BT_ATT_ERR_READ_NOT_PERMITTED), |
| ATT_ERR(BT_ATT_ERR_WRITE_NOT_PERMITTED), |
| ATT_ERR(BT_ATT_ERR_INVALID_PDU), |
| ATT_ERR(BT_ATT_ERR_AUTHENTICATION), |
| ATT_ERR(BT_ATT_ERR_NOT_SUPPORTED), |
| ATT_ERR(BT_ATT_ERR_INVALID_OFFSET), |
| ATT_ERR(BT_ATT_ERR_AUTHORIZATION), |
| ATT_ERR(BT_ATT_ERR_PREPARE_QUEUE_FULL), |
| ATT_ERR(BT_ATT_ERR_ATTRIBUTE_NOT_FOUND), |
| ATT_ERR(BT_ATT_ERR_ATTRIBUTE_NOT_LONG), |
| ATT_ERR(BT_ATT_ERR_ENCRYPTION_KEY_SIZE), |
| ATT_ERR(BT_ATT_ERR_INVALID_ATTRIBUTE_LEN), |
| ATT_ERR(BT_ATT_ERR_UNLIKELY), |
| ATT_ERR(BT_ATT_ERR_INSUFFICIENT_ENCRYPTION), |
| ATT_ERR(BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE), |
| ATT_ERR(BT_ATT_ERR_INSUFFICIENT_RESOURCES), |
| ATT_ERR(BT_ATT_ERR_DB_OUT_OF_SYNC), |
| ATT_ERR(BT_ATT_ERR_VALUE_NOT_ALLOWED), |
| }; |
| |
| const char * const second_mapping_table[] = { |
| ATT_ERR_SECOND(BT_ATT_ERR_WRITE_REQ_REJECTED), |
| ATT_ERR_SECOND(BT_ATT_ERR_CCC_IMPROPER_CONF), |
| ATT_ERR_SECOND(BT_ATT_ERR_PROCEDURE_IN_PROGRESS), |
| ATT_ERR_SECOND(BT_ATT_ERR_OUT_OF_RANGE), |
| }; |
| |
| |
| if (att_err < ARRAY_SIZE(first_mapping_table) && first_mapping_table[att_err]) { |
| return first_mapping_table[att_err]; |
| } else if (att_err >= BT_ATT_ERR_WRITE_REQ_REJECTED) { |
| const uint8_t second_index = att_err - BT_ATT_ERR_WRITE_REQ_REJECTED; |
| |
| if (second_index < ARRAY_SIZE(second_mapping_table) && |
| second_mapping_table[second_index]) { |
| return second_mapping_table[second_index]; |
| } |
| } |
| |
| return "(unknown)"; |
| |
| #undef ATT_ERR |
| #undef ATT_ERR_SECOND |
| } |
| #endif /* CONFIG_BT_ATT_ERR_TO_STR */ |
| |
| static void att_tx_destroy(struct net_buf *buf) |
| { |
| struct bt_att_tx_meta_data *p_meta = bt_att_get_tx_meta_data(buf); |
| struct bt_att_tx_meta_data meta; |
| |
| LOG_DBG("%p", buf); |
| |
| /* Destroy the buffer first, as the callback may attempt to allocate a |
| * new one for another operation. |
| */ |
| meta = *p_meta; |
| |
| /* Clear the meta storage. This might help catch illegal |
| * "use-after-free"s. An initial memset is not necessary, as the |
| * metadata storage array is `static`. |
| */ |
| memset(p_meta, 0x00, sizeof(*p_meta)); |
| |
| /* After this point, p_meta doesn't belong to us. |
| * The user data will be memset to 0 on allocation. |
| */ |
| net_buf_destroy(buf); |
| |
| /* ATT opcode 0 is invalid. If we get here, that means the buffer got |
| * destroyed before it was ready to be sent. Hopefully nobody sets the |
| * opcode and then destroys the buffer without sending it. :'( |
| */ |
| if (meta.opcode != 0) { |
| att_on_sent_cb(&meta); |
| } |
| } |
| |
| NET_BUF_POOL_DEFINE(att_pool, CONFIG_BT_ATT_TX_COUNT, |
| BT_L2CAP_SDU_BUF_SIZE(BT_ATT_BUF_SIZE), |
| CONFIG_BT_CONN_TX_USER_DATA_SIZE, att_tx_destroy); |
| |
| struct bt_att_tx_meta_data *bt_att_get_tx_meta_data(const struct net_buf *buf) |
| { |
| __ASSERT_NO_MSG(net_buf_pool_get(buf->pool_id) == &att_pool); |
| |
| /* Metadata lifetime is implicitly tied to the buffer lifetime. |
| * Treat it as part of the buffer itself. |
| */ |
| return &tx_meta_data_storage[net_buf_id((struct net_buf *)buf)]; |
| } |
| |
| static int bt_att_chan_send(struct bt_att_chan *chan, struct net_buf *buf); |
| |
| static void att_chan_mtu_updated(struct bt_att_chan *updated_chan); |
| static void bt_att_disconnected(struct bt_l2cap_chan *chan); |
| |
| struct net_buf *bt_att_create_rsp_pdu(struct bt_att_chan *chan, uint8_t op); |
| |
| static void bt_att_sent(struct bt_l2cap_chan *ch); |
| |
| static void att_sent(void *user_data) |
| { |
| struct bt_att_tx_meta_data *data = user_data; |
| struct bt_att_chan *att_chan = data->att_chan; |
| struct bt_conn *conn = att_chan->att->conn; |
| struct bt_l2cap_chan *chan = &att_chan->chan.chan; |
| |
| __ASSERT_NO_MSG(!bt_att_is_enhanced(att_chan)); |
| |
| LOG_DBG("conn %p chan %p", conn, chan); |
| |
| /* For EATT, `bt_att_sent` is assigned to the `.sent` L2 callback. |
| * L2CAP will then call it once the SDU has finished sending. |
| * |
| * For UATT, this won't happen, as static LE l2cap channels don't have |
| * SDUs. Call it manually instead. |
| */ |
| bt_att_sent(chan); |
| } |
| |
| /* In case of success the ownership of the buffer is transferred to the stack |
| * which takes care of releasing it when it completes transmitting to the |
| * controller. |
| * |
| * In case bt_l2cap_send_cb fails the buffer state and ownership are retained |
| * so the buffer can be safely pushed back to the queue to be processed later. |
| */ |
| static int chan_send(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_hdr *hdr; |
| struct net_buf_simple_state state; |
| int err; |
| struct bt_att_tx_meta_data *data = bt_att_get_tx_meta_data(buf); |
| struct bt_att_chan *prev_chan = data->att_chan; |
| |
| hdr = (void *)buf->data; |
| |
| LOG_DBG("code 0x%02x", hdr->code); |
| |
| if (!atomic_test_bit(chan->flags, ATT_CONNECTED)) { |
| LOG_ERR("ATT channel not connected"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_EATT) && hdr->code == BT_ATT_OP_MTU_REQ && |
| chan->chan.tx.cid != BT_L2CAP_CID_ATT) { |
| /* The Exchange MTU sub-procedure shall only be supported on |
| * the LE Fixed Channel Unenhanced ATT bearer |
| */ |
| return -ENOTSUP; |
| } |
| |
| __ASSERT_NO_MSG(buf->len >= sizeof(struct bt_att_hdr)); |
| data->opcode = buf->data[0]; |
| data->err = 0; |
| |
| if (IS_ENABLED(CONFIG_BT_EATT) && bt_att_is_enhanced(chan)) { |
| /* Check if sent is pending already, if it does it cannot be |
| * modified so the operation will need to be queued. |
| */ |
| if (atomic_test_bit(chan->flags, ATT_PENDING_SENT)) { |
| return -EAGAIN; |
| } |
| |
| if (hdr->code == BT_ATT_OP_SIGNED_WRITE_CMD) { |
| return -ENOTSUP; |
| } |
| |
| /* Check if the channel is ready to send in case of a request */ |
| if (att_op_get_type(hdr->code) == ATT_REQUEST && |
| !atomic_test_bit(chan->chan.chan.status, |
| BT_L2CAP_STATUS_OUT)) { |
| return -EAGAIN; |
| } |
| |
| atomic_set_bit(chan->flags, ATT_PENDING_SENT); |
| data->att_chan = chan; |
| |
| /* bt_l2cap_chan_send does actually return the number of bytes |
| * that could be sent immediately. |
| */ |
| err = bt_l2cap_chan_send(&chan->chan.chan, buf); |
| if (err < 0) { |
| data->att_chan = prev_chan; |
| atomic_clear_bit(chan->flags, ATT_PENDING_SENT); |
| data->err = err; |
| |
| return err; |
| } else { |
| /* On success, the almighty scheduler might already have |
| * run the destroy cb on the buffer. In that case, buf |
| * and its metadata are dangling pointers. |
| */ |
| buf = NULL; |
| data = NULL; |
| } |
| |
| return 0; |
| } |
| |
| if (hdr->code == BT_ATT_OP_SIGNED_WRITE_CMD) { |
| err = bt_smp_sign(chan->att->conn, buf); |
| if (err) { |
| LOG_ERR("Error signing data"); |
| net_buf_unref(buf); |
| return err; |
| } |
| } |
| |
| net_buf_simple_save(&buf->b, &state); |
| |
| data->att_chan = chan; |
| |
| err = bt_l2cap_send_pdu(&chan->chan, buf, NULL, NULL); |
| if (err) { |
| if (err == -ENOBUFS) { |
| LOG_ERR("Ran out of TX buffers or contexts."); |
| } |
| /* In case of an error has occurred restore the buffer state */ |
| net_buf_simple_restore(&buf->b, &state); |
| data->att_chan = prev_chan; |
| data->err = err; |
| } |
| |
| return err; |
| } |
| |
| static bool att_chan_matches_chan_opt(struct bt_att_chan *chan, enum bt_att_chan_opt chan_opt) |
| { |
| __ASSERT_NO_MSG(chan_opt <= BT_ATT_CHAN_OPT_ENHANCED_ONLY); |
| |
| if (chan_opt == BT_ATT_CHAN_OPT_NONE) { |
| return true; |
| } |
| |
| if (bt_att_is_enhanced(chan)) { |
| return (chan_opt & BT_ATT_CHAN_OPT_ENHANCED_ONLY); |
| } else { |
| return (chan_opt & BT_ATT_CHAN_OPT_UNENHANCED_ONLY); |
| } |
| } |
| |
| static struct net_buf *get_first_buf_matching_chan(struct k_fifo *fifo, struct bt_att_chan *chan) |
| { |
| if (IS_ENABLED(CONFIG_BT_EATT)) { |
| struct k_fifo skipped; |
| struct net_buf *buf; |
| struct net_buf *ret = NULL; |
| struct bt_att_tx_meta_data *meta; |
| |
| k_fifo_init(&skipped); |
| |
| while ((buf = k_fifo_get(fifo, K_NO_WAIT))) { |
| meta = bt_att_get_tx_meta_data(buf); |
| if (!ret && |
| att_chan_matches_chan_opt(chan, meta->chan_opt)) { |
| ret = buf; |
| } else { |
| k_fifo_put(&skipped, buf); |
| } |
| } |
| |
| __ASSERT_NO_MSG(k_fifo_is_empty(fifo)); |
| |
| while ((buf = k_fifo_get(&skipped, K_NO_WAIT))) { |
| k_fifo_put(fifo, buf); |
| } |
| |
| __ASSERT_NO_MSG(k_fifo_is_empty(&skipped)); |
| |
| return ret; |
| } else { |
| return k_fifo_get(fifo, K_NO_WAIT); |
| } |
| } |
| |
| static struct bt_att_req *get_first_req_matching_chan(sys_slist_t *reqs, struct bt_att_chan *chan) |
| { |
| if (IS_ENABLED(CONFIG_BT_EATT)) { |
| sys_snode_t *curr, *prev = NULL; |
| struct bt_att_tx_meta_data *meta = NULL; |
| |
| SYS_SLIST_FOR_EACH_NODE(reqs, curr) { |
| meta = bt_att_get_tx_meta_data(ATT_REQ(curr)->buf); |
| if (att_chan_matches_chan_opt(chan, meta->chan_opt)) { |
| break; |
| } |
| |
| prev = curr; |
| } |
| |
| if (curr) { |
| sys_slist_remove(reqs, prev, curr); |
| |
| return ATT_REQ(curr); |
| } |
| |
| return NULL; |
| } |
| |
| sys_snode_t *node = sys_slist_get(reqs); |
| |
| if (node) { |
| return ATT_REQ(node); |
| } else { |
| return NULL; |
| } |
| } |
| |
| static int process_queue(struct bt_att_chan *chan, struct k_fifo *queue) |
| { |
| struct net_buf *buf; |
| int err; |
| |
| buf = get_first_buf_matching_chan(queue, chan); |
| if (buf) { |
| err = bt_att_chan_send(chan, buf); |
| if (err) { |
| /* Push it back if it could not be send */ |
| k_queue_prepend(&queue->_queue, buf); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| /* Send requests without taking tx_sem */ |
| static int chan_req_send(struct bt_att_chan *chan, struct bt_att_req *req) |
| { |
| struct net_buf *buf; |
| int err; |
| |
| if (bt_att_mtu(chan) < net_buf_frags_len(req->buf)) { |
| return -EMSGSIZE; |
| } |
| |
| LOG_DBG("chan %p req %p len %zu", chan, req, net_buf_frags_len(req->buf)); |
| |
| chan->req = req; |
| |
| /* Release since bt_l2cap_send_cb takes ownership of the buffer */ |
| buf = req->buf; |
| req->buf = NULL; |
| |
| /* This lock makes sure the value of `bt_att_mtu(chan)` does not |
| * change. |
| */ |
| k_sched_lock(); |
| err = bt_att_chan_send(chan, buf); |
| if (err) { |
| /* We still have the ownership of the buffer */ |
| req->buf = buf; |
| chan->req = NULL; |
| } else { |
| bt_gatt_req_set_mtu(req, bt_att_mtu(chan)); |
| } |
| k_sched_unlock(); |
| |
| return err; |
| } |
| |
| static void bt_att_sent(struct bt_l2cap_chan *ch) |
| { |
| struct bt_att_chan *chan = ATT_CHAN(ch); |
| struct bt_att *att = chan->att; |
| int err; |
| |
| LOG_DBG("chan %p", chan); |
| |
| atomic_clear_bit(chan->flags, ATT_PENDING_SENT); |
| |
| if (!att) { |
| LOG_DBG("Ignore sent on detached ATT chan"); |
| return; |
| } |
| |
| /* Process pending requests first since they require a response they |
| * can only be processed one at time while if other queues were |
| * processed before they may always contain a buffer starving the |
| * request queue. |
| */ |
| if (!chan->req && !sys_slist_is_empty(&att->reqs)) { |
| sys_snode_t *node = sys_slist_get(&att->reqs); |
| |
| if (chan_req_send(chan, ATT_REQ(node)) >= 0) { |
| return; |
| } |
| |
| /* Prepend back to the list as it could not be sent */ |
| sys_slist_prepend(&att->reqs, node); |
| } |
| |
| /* Process channel queue */ |
| err = process_queue(chan, &chan->tx_queue); |
| if (!err) { |
| return; |
| } |
| |
| /* Process global queue */ |
| (void)process_queue(chan, &att->tx_queue); |
| } |
| |
| static void chan_rebegin_att_timeout(struct bt_att_tx_meta_data *user_data) |
| { |
| struct bt_att_tx_meta_data *data = user_data; |
| struct bt_att_chan *chan = data->att_chan; |
| |
| LOG_DBG("chan %p chan->req %p", chan, chan->req); |
| |
| if (!atomic_test_bit(chan->flags, ATT_CONNECTED)) { |
| LOG_ERR("ATT channel not connected"); |
| return; |
| } |
| |
| /* Start timeout work. Only if we are sure that the request is really |
| * in-flight. |
| */ |
| if (chan->req) { |
| k_work_reschedule(&chan->timeout_work, BT_ATT_TIMEOUT); |
| } |
| } |
| |
| static void chan_req_notif_sent(struct bt_att_tx_meta_data *user_data) |
| { |
| struct bt_att_tx_meta_data *data = user_data; |
| struct bt_att_chan *chan = data->att_chan; |
| struct bt_conn *conn = chan->att->conn; |
| bt_gatt_complete_func_t func = data->func; |
| uint16_t attr_count = data->attr_count; |
| void *ud = data->user_data; |
| |
| LOG_DBG("chan %p CID 0x%04X", chan, chan->chan.tx.cid); |
| |
| if (!atomic_test_bit(chan->flags, ATT_CONNECTED)) { |
| LOG_ERR("ATT channel not connected"); |
| return; |
| } |
| |
| if (func) { |
| for (uint16_t i = 0; i < attr_count; i++) { |
| func(conn, ud); |
| } |
| } |
| } |
| |
| static void att_on_sent_cb(struct bt_att_tx_meta_data *meta) |
| { |
| const att_type_t op_type = att_op_get_type(meta->opcode); |
| |
| LOG_DBG("opcode 0x%x", meta->opcode); |
| |
| if (!meta->att_chan || |
| !meta->att_chan->att || |
| !meta->att_chan->att->conn) { |
| LOG_DBG("Bearer not connected, dropping ATT cb"); |
| return; |
| } |
| |
| if (meta->err) { |
| LOG_ERR("Got err %d, not calling ATT cb", meta->err); |
| return; |
| } |
| |
| if (!bt_att_is_enhanced(meta->att_chan)) { |
| /* For EATT, L2CAP will call it after the SDU is fully sent. */ |
| LOG_DBG("UATT bearer, calling att_sent"); |
| att_sent(meta); |
| } |
| |
| switch (op_type) { |
| case ATT_RESPONSE: |
| return; |
| case ATT_CONFIRMATION: |
| return; |
| case ATT_REQUEST: |
| case ATT_INDICATION: |
| chan_rebegin_att_timeout(meta); |
| return; |
| case ATT_COMMAND: |
| case ATT_NOTIFICATION: |
| chan_req_notif_sent(meta); |
| return; |
| default: |
| __ASSERT(false, "Unknown op type 0x%02X", op_type); |
| return; |
| } |
| } |
| |
| static struct net_buf *bt_att_chan_create_pdu(struct bt_att_chan *chan, uint8_t op, size_t len) |
| { |
| struct bt_att_hdr *hdr; |
| struct net_buf *buf; |
| struct bt_att_tx_meta_data *data; |
| k_timeout_t timeout; |
| |
| if (len + sizeof(op) > bt_att_mtu(chan)) { |
| LOG_WRN("ATT MTU exceeded, max %u, wanted %zu", bt_att_mtu(chan), |
| len + sizeof(op)); |
| return NULL; |
| } |
| |
| switch (att_op_get_type(op)) { |
| case ATT_RESPONSE: |
| case ATT_CONFIRMATION: |
| /* Use a timeout only when responding/confirming */ |
| timeout = BT_ATT_TIMEOUT; |
| break; |
| default: |
| timeout = K_FOREVER; |
| } |
| |
| /* This will reserve headspace for lower layers */ |
| buf = bt_l2cap_create_pdu_timeout(&att_pool, 0, timeout); |
| if (!buf) { |
| LOG_ERR("Unable to allocate buffer for op 0x%02x", op); |
| return NULL; |
| } |
| |
| /* If we got a buf from `att_pool`, then the metadata slot at its index |
| * is officially ours to use. |
| */ |
| data = bt_att_get_tx_meta_data(buf); |
| |
| if (IS_ENABLED(CONFIG_BT_EATT)) { |
| net_buf_reserve(buf, BT_L2CAP_SDU_BUF_SIZE(0)); |
| } |
| |
| data->att_chan = chan; |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = op; |
| |
| return buf; |
| } |
| |
| static int bt_att_chan_send(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| LOG_DBG("chan %p flags %lu code 0x%02x", chan, atomic_get(chan->flags), |
| ((struct bt_att_hdr *)buf->data)->code); |
| |
| if (IS_ENABLED(CONFIG_BT_EATT) && |
| !att_chan_matches_chan_opt(chan, bt_att_get_tx_meta_data(buf)->chan_opt)) { |
| return -EINVAL; |
| } |
| |
| return chan_send(chan, buf); |
| } |
| |
| static void att_send_process(struct bt_att *att) |
| { |
| struct bt_att_chan *chan, *tmp, *prev = NULL; |
| int err = 0; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| if (err == -ENOENT && prev && |
| (bt_att_is_enhanced(chan) == bt_att_is_enhanced(prev))) { |
| /* If there was nothing to send for the previous channel and the current |
| * channel has the same "enhancedness", there will be nothing to send for |
| * this channel either. |
| */ |
| continue; |
| } |
| |
| err = process_queue(chan, &att->tx_queue); |
| if (!err) { |
| /* Success */ |
| return; |
| } |
| |
| prev = chan; |
| } |
| } |
| |
| static void bt_att_chan_send_rsp(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| int err; |
| |
| err = chan_send(chan, buf); |
| if (err) { |
| /* Responses need to be sent back using the same channel */ |
| k_fifo_put(&chan->tx_queue, buf); |
| } |
| } |
| |
| static void send_err_rsp(struct bt_att_chan *chan, uint8_t req, uint16_t handle, |
| uint8_t err) |
| { |
| struct bt_att_error_rsp *rsp; |
| struct net_buf *buf; |
| |
| /* Ignore opcode 0x00 */ |
| if (!req) { |
| return; |
| } |
| |
| buf = bt_att_chan_create_pdu(chan, BT_ATT_OP_ERROR_RSP, sizeof(*rsp)); |
| if (!buf) { |
| return; |
| } |
| |
| rsp = net_buf_add(buf, sizeof(*rsp)); |
| rsp->request = req; |
| rsp->handle = sys_cpu_to_le16(handle); |
| rsp->error = err; |
| |
| bt_att_chan_send_rsp(chan, buf); |
| } |
| |
| static uint8_t att_mtu_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_exchange_mtu_req *req; |
| struct bt_att_exchange_mtu_rsp *rsp; |
| struct net_buf *pdu; |
| uint16_t mtu_client, mtu_server; |
| |
| /* Exchange MTU sub-procedure shall only be supported on the |
| * LE Fixed Channel Unenhanced ATT bearer. |
| */ |
| if (bt_att_is_enhanced(chan)) { |
| return BT_ATT_ERR_NOT_SUPPORTED; |
| } |
| |
| req = (void *)buf->data; |
| |
| mtu_client = sys_le16_to_cpu(req->mtu); |
| |
| LOG_DBG("Client MTU %u", mtu_client); |
| |
| /* Check if MTU is valid */ |
| if (mtu_client < BT_ATT_DEFAULT_LE_MTU) { |
| return BT_ATT_ERR_INVALID_PDU; |
| } |
| |
| pdu = bt_att_create_rsp_pdu(chan, BT_ATT_OP_MTU_RSP); |
| if (!pdu) { |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| mtu_server = BT_LOCAL_ATT_MTU_UATT; |
| |
| LOG_DBG("Server MTU %u", mtu_server); |
| |
| rsp = net_buf_add(pdu, sizeof(*rsp)); |
| rsp->mtu = sys_cpu_to_le16(mtu_server); |
| |
| bt_att_chan_send_rsp(chan, pdu); |
| |
| /* The ATT_EXCHANGE_MTU_REQ/RSP is just an alternative way of |
| * communicating the L2CAP MTU. |
| */ |
| chan->chan.rx.mtu = mtu_server; |
| chan->chan.tx.mtu = mtu_client; |
| |
| LOG_DBG("Negotiated MTU %u", bt_att_mtu(chan)); |
| |
| #if defined(CONFIG_BT_GATT_CLIENT) |
| /* Mark the MTU Exchange as complete. |
| * This will skip sending ATT Exchange MTU from our side. |
| * |
| * Core 5.3 | Vol 3, Part F 3.4.2.2: |
| * If MTU is exchanged in one direction, that is sufficient for both directions. |
| */ |
| atomic_set_bit(chan->att->conn->flags, BT_CONN_ATT_MTU_EXCHANGED); |
| #endif /* CONFIG_BT_GATT_CLIENT */ |
| |
| att_chan_mtu_updated(chan); |
| |
| return 0; |
| } |
| |
| static int bt_att_chan_req_send(struct bt_att_chan *chan, |
| struct bt_att_req *req) |
| { |
| __ASSERT_NO_MSG(chan); |
| __ASSERT_NO_MSG(req); |
| __ASSERT_NO_MSG(req->func); |
| __ASSERT_NO_MSG(!chan->req); |
| |
| LOG_DBG("req %p", req); |
| |
| return chan_req_send(chan, req); |
| } |
| |
| static void att_req_send_process(struct bt_att *att) |
| { |
| struct bt_att_req *req = NULL; |
| struct bt_att_chan *chan, *tmp, *prev = NULL; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| /* If there is an ongoing transaction, do not use the channel */ |
| if (chan->req) { |
| continue; |
| } |
| |
| if (!req && prev && (bt_att_is_enhanced(chan) == bt_att_is_enhanced(prev))) { |
| /* If there was nothing to send for the previous channel and the current |
| * channel has the same "enhancedness", there will be nothing to send for |
| * this channel either. |
| */ |
| continue; |
| } |
| |
| prev = chan; |
| |
| /* Pull next request from the list */ |
| req = get_first_req_matching_chan(&att->reqs, chan); |
| if (!req) { |
| continue; |
| } |
| |
| if (bt_att_chan_req_send(chan, req) >= 0) { |
| return; |
| } |
| |
| /* Prepend back to the list as it could not be sent */ |
| sys_slist_prepend(&att->reqs, &req->node); |
| } |
| } |
| |
| static uint8_t att_handle_rsp(struct bt_att_chan *chan, void *pdu, uint16_t len, |
| int err) |
| { |
| bt_att_func_t func = NULL; |
| void *params; |
| |
| LOG_DBG("chan %p err %d len %u: %s", chan, err, len, bt_hex(pdu, len)); |
| |
| /* Cancel timeout if ongoing */ |
| k_work_cancel_delayable(&chan->timeout_work); |
| |
| if (!chan->req) { |
| LOG_WRN("No pending ATT request"); |
| goto process; |
| } |
| |
| /* Check if request has been cancelled */ |
| if (chan->req == &cancel) { |
| chan->req = NULL; |
| goto process; |
| } |
| |
| /* Reset func so it can be reused by the callback */ |
| func = chan->req->func; |
| chan->req->func = NULL; |
| params = chan->req->user_data; |
| |
| /* free allocated request so its memory can be reused */ |
| bt_att_req_free(chan->req); |
| chan->req = NULL; |
| |
| process: |
| /* Process pending requests */ |
| att_req_send_process(chan->att); |
| if (func) { |
| func(chan->att->conn, err, pdu, len, params); |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_BT_GATT_CLIENT) |
| static uint8_t att_mtu_rsp(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_exchange_mtu_rsp *rsp; |
| uint16_t mtu; |
| |
| rsp = (void *)buf->data; |
| |
| mtu = sys_le16_to_cpu(rsp->mtu); |
| |
| LOG_DBG("Server MTU %u", mtu); |
| |
| /* Check if MTU is valid */ |
| if (mtu < BT_ATT_DEFAULT_LE_MTU) { |
| return att_handle_rsp(chan, NULL, 0, BT_ATT_ERR_INVALID_PDU); |
| } |
| |
| /* The following must equal the value we sent in the req. We assume this |
| * is a rsp to `gatt_exchange_mtu_encode`. |
| */ |
| chan->chan.rx.mtu = BT_LOCAL_ATT_MTU_UATT; |
| /* The ATT_EXCHANGE_MTU_REQ/RSP is just an alternative way of |
| * communicating the L2CAP MTU. |
| */ |
| |
| chan->chan.tx.mtu = mtu; |
| |
| LOG_DBG("Negotiated MTU %u", bt_att_mtu(chan)); |
| |
| att_chan_mtu_updated(chan); |
| |
| return att_handle_rsp(chan, rsp, buf->len, 0); |
| } |
| #endif /* CONFIG_BT_GATT_CLIENT */ |
| |
| static bool range_is_valid(uint16_t start, uint16_t end, uint16_t *err) |
| { |
| /* Handle 0 is invalid */ |
| if (!start || !end) { |
| if (err) { |
| *err = 0U; |
| } |
| return false; |
| } |
| |
| /* Check if range is valid */ |
| if (start > end) { |
| if (err) { |
| *err = start; |
| } |
| return false; |
| } |
| |
| return true; |
| } |
| |
| struct find_info_data { |
| struct bt_att_chan *chan; |
| struct net_buf *buf; |
| struct bt_att_find_info_rsp *rsp; |
| union { |
| struct bt_att_info_16 *info16; |
| struct bt_att_info_128 *info128; |
| }; |
| }; |
| |
| static uint8_t find_info_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct find_info_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* Initialize rsp at first entry */ |
| if (!data->rsp) { |
| data->rsp = net_buf_add(data->buf, sizeof(*data->rsp)); |
| data->rsp->format = (attr->uuid->type == BT_UUID_TYPE_16) ? |
| BT_ATT_INFO_16 : BT_ATT_INFO_128; |
| } |
| |
| switch (data->rsp->format) { |
| case BT_ATT_INFO_16: |
| if (attr->uuid->type != BT_UUID_TYPE_16) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Fast forward to next item position */ |
| data->info16 = net_buf_add(data->buf, sizeof(*data->info16)); |
| data->info16->handle = sys_cpu_to_le16(handle); |
| data->info16->uuid = sys_cpu_to_le16(BT_UUID_16(attr->uuid)->val); |
| |
| if (bt_att_mtu(chan) - data->buf->len > |
| sizeof(*data->info16)) { |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| break; |
| case BT_ATT_INFO_128: |
| if (attr->uuid->type != BT_UUID_TYPE_128) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Fast forward to next item position */ |
| data->info128 = net_buf_add(data->buf, sizeof(*data->info128)); |
| data->info128->handle = sys_cpu_to_le16(handle); |
| memcpy(data->info128->uuid, BT_UUID_128(attr->uuid)->val, |
| sizeof(data->info128->uuid)); |
| |
| if (bt_att_mtu(chan) - data->buf->len > |
| sizeof(*data->info128)) { |
| return BT_GATT_ITER_CONTINUE; |
| } |
| } |
| |
| return BT_GATT_ITER_STOP; |
| } |
| |
| static uint8_t att_find_info_rsp(struct bt_att_chan *chan, uint16_t start_handle, |
| uint16_t end_handle) |
| { |
| struct find_info_data data; |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_FIND_INFO_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| bt_gatt_foreach_attr(start_handle, end_handle, find_info_cb, &data); |
| |
| if (!data.rsp) { |
| net_buf_unref(data.buf); |
| /* Respond since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_FIND_INFO_REQ, start_handle, |
| BT_ATT_ERR_ATTRIBUTE_NOT_FOUND); |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_find_info_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_find_info_req *req; |
| uint16_t start_handle, end_handle, err_handle; |
| |
| req = (void *)buf->data; |
| |
| start_handle = sys_le16_to_cpu(req->start_handle); |
| end_handle = sys_le16_to_cpu(req->end_handle); |
| |
| LOG_DBG("start_handle 0x%04x end_handle 0x%04x", start_handle, end_handle); |
| |
| if (!range_is_valid(start_handle, end_handle, &err_handle)) { |
| send_err_rsp(chan, BT_ATT_OP_FIND_INFO_REQ, err_handle, |
| BT_ATT_ERR_INVALID_HANDLE); |
| return 0; |
| } |
| |
| return att_find_info_rsp(chan, start_handle, end_handle); |
| } |
| |
| struct find_type_data { |
| struct bt_att_chan *chan; |
| struct net_buf *buf; |
| struct bt_att_handle_group *group; |
| const void *value; |
| uint8_t value_len; |
| uint8_t err; |
| }; |
| |
| static uint8_t find_type_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct find_type_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| struct bt_conn *conn = chan->chan.chan.conn; |
| int read; |
| uint8_t uuid[16]; |
| struct net_buf *frag; |
| size_t len; |
| |
| /* Skip secondary services */ |
| if (!bt_uuid_cmp(attr->uuid, BT_UUID_GATT_SECONDARY)) { |
| goto skip; |
| } |
| |
| /* Update group end_handle if not a primary service */ |
| if (bt_uuid_cmp(attr->uuid, BT_UUID_GATT_PRIMARY)) { |
| if (data->group && |
| handle > sys_le16_to_cpu(data->group->end_handle)) { |
| data->group->end_handle = sys_cpu_to_le16(handle); |
| } |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* stop if there is no space left */ |
| if (bt_att_mtu(chan) - net_buf_frags_len(data->buf) < |
| sizeof(*data->group)) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| frag = net_buf_frag_last(data->buf); |
| |
| len = MIN(bt_att_mtu(chan) - net_buf_frags_len(data->buf), |
| net_buf_tailroom(frag)); |
| if (!len) { |
| frag = net_buf_alloc(net_buf_pool_get(data->buf->pool_id), |
| K_NO_WAIT); |
| /* If not buffer can be allocated immediately stop */ |
| if (!frag) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| net_buf_frag_add(data->buf, frag); |
| } |
| |
| /* Read attribute value and store in the buffer */ |
| read = attr->read(conn, attr, uuid, sizeof(uuid), 0); |
| if (read < 0) { |
| /* |
| * Since we don't know if it is the service with requested UUID, |
| * we cannot respond with an error to this request. |
| */ |
| goto skip; |
| } |
| |
| /* Check if data matches */ |
| if (read != data->value_len) { |
| /* Use bt_uuid_cmp() to compare UUIDs of different form. */ |
| struct bt_uuid_128 ref_uuid; |
| struct bt_uuid_128 recvd_uuid; |
| |
| if (!bt_uuid_create(&recvd_uuid.uuid, data->value, data->value_len)) { |
| LOG_WRN("Unable to create UUID: size %u", data->value_len); |
| goto skip; |
| } |
| if (!bt_uuid_create(&ref_uuid.uuid, uuid, read)) { |
| LOG_WRN("Unable to create UUID: size %d", read); |
| goto skip; |
| } |
| if (bt_uuid_cmp(&recvd_uuid.uuid, &ref_uuid.uuid)) { |
| goto skip; |
| } |
| } else if (memcmp(data->value, uuid, read)) { |
| goto skip; |
| } |
| |
| /* If service has been found, error should be cleared */ |
| data->err = 0x00; |
| |
| /* Fast forward to next item position */ |
| data->group = net_buf_add(frag, sizeof(*data->group)); |
| data->group->start_handle = sys_cpu_to_le16(handle); |
| data->group->end_handle = sys_cpu_to_le16(handle); |
| |
| /* continue to find the end_handle */ |
| return BT_GATT_ITER_CONTINUE; |
| |
| skip: |
| data->group = NULL; |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_find_type_rsp(struct bt_att_chan *chan, uint16_t start_handle, |
| uint16_t end_handle, const void *value, |
| uint8_t value_len) |
| { |
| struct find_type_data data; |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_FIND_TYPE_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| data.group = NULL; |
| data.value = value; |
| data.value_len = value_len; |
| |
| /* Pre-set error in case no service will be found */ |
| data.err = BT_ATT_ERR_ATTRIBUTE_NOT_FOUND; |
| |
| bt_gatt_foreach_attr(start_handle, end_handle, find_type_cb, &data); |
| |
| /* If error has not been cleared, no service has been found */ |
| if (data.err) { |
| net_buf_unref(data.buf); |
| /* Respond since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_FIND_TYPE_REQ, start_handle, |
| data.err); |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_find_type_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_find_type_req *req; |
| uint16_t start_handle, end_handle, err_handle, type; |
| uint8_t *value; |
| |
| req = net_buf_pull_mem(buf, sizeof(*req)); |
| |
| start_handle = sys_le16_to_cpu(req->start_handle); |
| end_handle = sys_le16_to_cpu(req->end_handle); |
| type = sys_le16_to_cpu(req->type); |
| value = buf->data; |
| |
| LOG_DBG("start_handle 0x%04x end_handle 0x%04x type %u", start_handle, end_handle, type); |
| |
| if (!range_is_valid(start_handle, end_handle, &err_handle)) { |
| send_err_rsp(chan, BT_ATT_OP_FIND_TYPE_REQ, err_handle, |
| BT_ATT_ERR_INVALID_HANDLE); |
| return 0; |
| } |
| |
| /* The Attribute Protocol Find By Type Value Request shall be used with |
| * the Attribute Type parameter set to the UUID for "Primary Service" |
| * and the Attribute Value set to the 16-bit Bluetooth UUID or 128-bit |
| * UUID for the specific primary service. |
| */ |
| if (bt_uuid_cmp(BT_UUID_DECLARE_16(type), BT_UUID_GATT_PRIMARY)) { |
| send_err_rsp(chan, BT_ATT_OP_FIND_TYPE_REQ, start_handle, |
| BT_ATT_ERR_ATTRIBUTE_NOT_FOUND); |
| return 0; |
| } |
| |
| return att_find_type_rsp(chan, start_handle, end_handle, value, |
| buf->len); |
| } |
| |
| static uint8_t err_to_att(int err) |
| { |
| LOG_DBG("%d", err); |
| |
| if (err < 0 && err >= -0xff) { |
| return -err; |
| } |
| |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| struct read_type_data { |
| struct bt_att_chan *chan; |
| struct bt_uuid *uuid; |
| struct net_buf *buf; |
| struct bt_att_read_type_rsp *rsp; |
| struct bt_att_data *item; |
| uint8_t err; |
| }; |
| |
| typedef bool (*attr_read_cb)(struct net_buf *buf, ssize_t read, |
| void *user_data); |
| |
| static bool attr_read_authorize(struct bt_conn *conn, |
| const struct bt_gatt_attr *attr) |
| { |
| if (!IS_ENABLED(CONFIG_BT_GATT_AUTHORIZATION_CUSTOM)) { |
| return true; |
| } |
| |
| if (!authorization_cb || !authorization_cb->read_authorize) { |
| return true; |
| } |
| |
| return authorization_cb->read_authorize(conn, attr); |
| } |
| |
| static bool attr_read_type_cb(struct net_buf *frag, ssize_t read, |
| void *user_data) |
| { |
| struct read_type_data *data = user_data; |
| |
| if (!data->rsp->len) { |
| /* Set len to be the first item found */ |
| data->rsp->len = read + sizeof(*data->item); |
| } else if (data->rsp->len != read + sizeof(*data->item)) { |
| /* All items should have the same size */ |
| frag->len -= sizeof(*data->item); |
| data->item = NULL; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static ssize_t att_chan_read(struct bt_att_chan *chan, |
| const struct bt_gatt_attr *attr, |
| struct net_buf *buf, uint16_t offset, |
| attr_read_cb cb, void *user_data) |
| { |
| struct bt_conn *conn = chan->chan.chan.conn; |
| ssize_t read; |
| struct net_buf *frag; |
| size_t len, total = 0; |
| |
| if (bt_att_mtu(chan) <= net_buf_frags_len(buf)) { |
| return 0; |
| } |
| |
| frag = net_buf_frag_last(buf); |
| |
| /* Create necessary fragments if MTU is bigger than what a buffer can |
| * hold. |
| */ |
| do { |
| len = MIN(bt_att_mtu(chan) - net_buf_frags_len(buf), |
| net_buf_tailroom(frag)); |
| if (!len) { |
| frag = net_buf_alloc(net_buf_pool_get(buf->pool_id), |
| K_NO_WAIT); |
| /* If not buffer can be allocated immediately return */ |
| if (!frag) { |
| return total; |
| } |
| |
| net_buf_frag_add(buf, frag); |
| |
| len = MIN(bt_att_mtu(chan) - net_buf_frags_len(buf), |
| net_buf_tailroom(frag)); |
| } |
| |
| read = attr->read(conn, attr, frag->data + frag->len, len, |
| offset); |
| if (read < 0) { |
| if (total) { |
| return total; |
| } |
| |
| return read; |
| } |
| |
| if (cb && !cb(frag, read, user_data)) { |
| break; |
| } |
| |
| net_buf_add(frag, read); |
| total += read; |
| offset += read; |
| } while (bt_att_mtu(chan) > net_buf_frags_len(buf) && read == len); |
| |
| return total; |
| } |
| |
| static uint8_t read_type_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct read_type_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| struct bt_conn *conn = chan->chan.chan.conn; |
| ssize_t read; |
| |
| /* Skip if doesn't match */ |
| if (bt_uuid_cmp(attr->uuid, data->uuid)) { |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* |
| * If an attribute in the set of requested attributes would cause an |
| * Error Response then this attribute cannot be included in a |
| * Read By Type Response and the attributes before this attribute |
| * shall be returned |
| * |
| * If the first attribute in the set of requested attributes would |
| * cause an Error Response then no other attributes in the requested |
| * attributes can be considered. |
| */ |
| data->err = bt_gatt_check_perm(conn, attr, BT_GATT_PERM_READ_MASK); |
| if (data->err) { |
| if (data->rsp->len) { |
| data->err = 0x00; |
| } |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check the attribute authorization logic */ |
| if (!attr_read_authorize(conn, attr)) { |
| data->err = BT_ATT_ERR_AUTHORIZATION; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* |
| * If any attribute is founded in handle range it means that error |
| * should be changed from pre-set: attr not found error to no error. |
| */ |
| data->err = 0x00; |
| |
| /* Fast forward to next item position */ |
| data->item = net_buf_add(net_buf_frag_last(data->buf), |
| sizeof(*data->item)); |
| data->item->handle = sys_cpu_to_le16(handle); |
| |
| read = att_chan_read(chan, attr, data->buf, 0, attr_read_type_cb, data); |
| if (read < 0) { |
| data->err = err_to_att(read); |
| return BT_GATT_ITER_STOP; |
| } |
| |
| if (!data->item) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* continue only if there are still space for more items */ |
| return bt_att_mtu(chan) - net_buf_frags_len(data->buf) > |
| data->rsp->len ? BT_GATT_ITER_CONTINUE : BT_GATT_ITER_STOP; |
| } |
| |
| static uint8_t att_read_type_rsp(struct bt_att_chan *chan, struct bt_uuid *uuid, |
| uint16_t start_handle, uint16_t end_handle) |
| { |
| struct read_type_data data; |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_READ_TYPE_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| data.uuid = uuid; |
| data.rsp = net_buf_add(data.buf, sizeof(*data.rsp)); |
| data.rsp->len = 0U; |
| |
| /* Pre-set error if no attr will be found in handle */ |
| data.err = BT_ATT_ERR_ATTRIBUTE_NOT_FOUND; |
| |
| bt_gatt_foreach_attr(start_handle, end_handle, read_type_cb, &data); |
| |
| if (data.err) { |
| net_buf_unref(data.buf); |
| /* Response here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_READ_TYPE_REQ, start_handle, |
| data.err); |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_read_type_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_read_type_req *req; |
| uint16_t start_handle, end_handle, err_handle; |
| union { |
| struct bt_uuid uuid; |
| struct bt_uuid_16 u16; |
| struct bt_uuid_128 u128; |
| } u; |
| uint8_t uuid_len = buf->len - sizeof(*req); |
| |
| /* Type can only be UUID16 or UUID128 */ |
| if (uuid_len != 2 && uuid_len != 16) { |
| return BT_ATT_ERR_INVALID_PDU; |
| } |
| |
| req = net_buf_pull_mem(buf, sizeof(*req)); |
| |
| start_handle = sys_le16_to_cpu(req->start_handle); |
| end_handle = sys_le16_to_cpu(req->end_handle); |
| if (!bt_uuid_create(&u.uuid, req->uuid, uuid_len)) { |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| LOG_DBG("start_handle 0x%04x end_handle 0x%04x type %s", start_handle, end_handle, |
| bt_uuid_str(&u.uuid)); |
| |
| if (!range_is_valid(start_handle, end_handle, &err_handle)) { |
| send_err_rsp(chan, BT_ATT_OP_READ_TYPE_REQ, err_handle, |
| BT_ATT_ERR_INVALID_HANDLE); |
| return 0; |
| } |
| |
| /* Reading Database Hash is special as it may be used to make client change aware |
| * (Core Specification 5.4 Vol 3. Part G. 2.5.2.1 Robust Caching). |
| * |
| * GATT client shall always use GATT Read Using Characteristic UUID sub-procedure for |
| * reading Database Hash |
| * (Core Specification 5.4 Vol 3. Part G. 7.3 Databse Hash) |
| */ |
| if (bt_uuid_cmp(&u.uuid, BT_UUID_GATT_DB_HASH) != 0) { |
| if (!bt_gatt_change_aware(chan->att->conn, true)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| } |
| |
| return att_read_type_rsp(chan, &u.uuid, start_handle, end_handle); |
| } |
| |
| struct read_data { |
| struct bt_att_chan *chan; |
| uint16_t offset; |
| struct net_buf *buf; |
| uint8_t err; |
| }; |
| |
| static uint8_t read_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct read_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| struct bt_conn *conn = chan->chan.chan.conn; |
| int ret; |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* |
| * If any attribute is founded in handle range it means that error |
| * should be changed from pre-set: invalid handle error to no error. |
| */ |
| data->err = 0x00; |
| |
| /* Check attribute permissions */ |
| data->err = bt_gatt_check_perm(conn, attr, BT_GATT_PERM_READ_MASK); |
| if (data->err) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check the attribute authorization logic */ |
| if (!attr_read_authorize(conn, attr)) { |
| data->err = BT_ATT_ERR_AUTHORIZATION; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Read attribute value and store in the buffer */ |
| ret = att_chan_read(chan, attr, data->buf, data->offset, NULL, NULL); |
| if (ret < 0) { |
| data->err = err_to_att(ret); |
| return BT_GATT_ITER_STOP; |
| } |
| |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_read_rsp(struct bt_att_chan *chan, uint8_t op, uint8_t rsp, |
| uint16_t handle, uint16_t offset) |
| { |
| struct read_data data; |
| |
| if (!bt_gatt_change_aware(chan->att->conn, true)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| |
| if (!handle) { |
| return BT_ATT_ERR_INVALID_HANDLE; |
| } |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, rsp); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| data.offset = offset; |
| |
| /* Pre-set error if no attr will be found in handle */ |
| data.err = BT_ATT_ERR_INVALID_HANDLE; |
| |
| bt_gatt_foreach_attr(handle, handle, read_cb, &data); |
| |
| /* In case of error discard data and respond with an error */ |
| if (data.err) { |
| net_buf_unref(data.buf); |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, op, handle, data.err); |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_read_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_read_req *req; |
| uint16_t handle; |
| |
| req = (void *)buf->data; |
| |
| handle = sys_le16_to_cpu(req->handle); |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| return att_read_rsp(chan, BT_ATT_OP_READ_REQ, BT_ATT_OP_READ_RSP, |
| handle, 0); |
| } |
| |
| static uint8_t att_read_blob_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_read_blob_req *req; |
| uint16_t handle, offset; |
| |
| req = (void *)buf->data; |
| |
| handle = sys_le16_to_cpu(req->handle); |
| offset = sys_le16_to_cpu(req->offset); |
| |
| LOG_DBG("handle 0x%04x offset %u", handle, offset); |
| |
| return att_read_rsp(chan, BT_ATT_OP_READ_BLOB_REQ, |
| BT_ATT_OP_READ_BLOB_RSP, handle, offset); |
| } |
| |
| #if defined(CONFIG_BT_GATT_READ_MULTIPLE) |
| static uint8_t att_read_mult_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct read_data data; |
| uint16_t handle; |
| |
| if (!bt_gatt_change_aware(chan->att->conn, true)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_READ_MULT_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| |
| while (buf->len >= sizeof(uint16_t)) { |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("handle 0x%04x ", handle); |
| |
| /* An Error Response shall be sent by the server in response to |
| * the Read Multiple Request [....] if a read operation is not |
| * permitted on any of the Characteristic Values. |
| * |
| * If handle is not valid then return invalid handle error. |
| * If handle is found error will be cleared by read_cb. |
| */ |
| data.err = BT_ATT_ERR_INVALID_HANDLE; |
| |
| bt_gatt_foreach_attr(handle, handle, read_cb, &data); |
| |
| /* Stop reading in case of error */ |
| if (data.err) { |
| net_buf_unref(data.buf); |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_READ_MULT_REQ, handle, |
| data.err); |
| return 0; |
| } |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_GATT_READ_MULTIPLE */ |
| |
| #if defined(CONFIG_BT_GATT_READ_MULT_VAR_LEN) |
| static uint8_t read_vl_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct read_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| struct bt_conn *conn = chan->chan.chan.conn; |
| struct bt_att_read_mult_vl_rsp *rsp; |
| int read; |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* |
| * If any attribute is founded in handle range it means that error |
| * should be changed from pre-set: invalid handle error to no error. |
| */ |
| data->err = 0x00; |
| |
| /* Check attribute permissions */ |
| data->err = bt_gatt_check_perm(conn, attr, BT_GATT_PERM_READ_MASK); |
| if (data->err) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check the attribute authorization logic */ |
| if (!attr_read_authorize(conn, attr)) { |
| data->err = BT_ATT_ERR_AUTHORIZATION; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* The Length Value Tuple List may be truncated within the first two |
| * octets of a tuple due to the size limits of the current ATT_MTU. |
| */ |
| if (bt_att_mtu(chan) - data->buf->len < 2) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| rsp = net_buf_add(data->buf, sizeof(*rsp)); |
| |
| read = att_chan_read(chan, attr, data->buf, data->offset, NULL, NULL); |
| if (read < 0) { |
| data->err = err_to_att(read); |
| return BT_GATT_ITER_STOP; |
| } |
| |
| rsp->len = read; |
| |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_read_mult_vl_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct read_data data; |
| uint16_t handle; |
| |
| if (!bt_gatt_change_aware(chan->att->conn, true)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_READ_MULT_VL_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| |
| while (buf->len >= sizeof(uint16_t)) { |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("handle 0x%04x ", handle); |
| |
| /* If handle is not valid then return invalid handle error. |
| * If handle is found error will be cleared by read_cb. |
| */ |
| data.err = BT_ATT_ERR_INVALID_HANDLE; |
| |
| bt_gatt_foreach_attr(handle, handle, read_vl_cb, &data); |
| |
| /* Stop reading in case of error */ |
| if (data.err) { |
| net_buf_unref(data.buf); |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_READ_MULT_VL_REQ, handle, |
| data.err); |
| return 0; |
| } |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_GATT_READ_MULT_VAR_LEN */ |
| |
| struct read_group_data { |
| struct bt_att_chan *chan; |
| struct bt_uuid *uuid; |
| struct net_buf *buf; |
| struct bt_att_read_group_rsp *rsp; |
| struct bt_att_group_data *group; |
| }; |
| |
| static bool attr_read_group_cb(struct net_buf *frag, ssize_t read, |
| void *user_data) |
| { |
| struct read_group_data *data = user_data; |
| |
| if (!data->rsp->len) { |
| /* Set len to be the first group found */ |
| data->rsp->len = read + sizeof(*data->group); |
| } else if (data->rsp->len != read + sizeof(*data->group)) { |
| /* All groups entries should have the same size */ |
| data->buf->len -= sizeof(*data->group); |
| data->group = NULL; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static uint8_t read_group_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct read_group_data *data = user_data; |
| struct bt_att_chan *chan = data->chan; |
| int read; |
| |
| /* Update group end_handle if attribute is not a service */ |
| if (bt_uuid_cmp(attr->uuid, BT_UUID_GATT_PRIMARY) && |
| bt_uuid_cmp(attr->uuid, BT_UUID_GATT_SECONDARY)) { |
| if (data->group && |
| handle > sys_le16_to_cpu(data->group->end_handle)) { |
| data->group->end_handle = sys_cpu_to_le16(handle); |
| } |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| /* If Group Type don't match skip */ |
| if (bt_uuid_cmp(attr->uuid, data->uuid)) { |
| data->group = NULL; |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* Stop if there is no space left */ |
| if (data->rsp->len && |
| bt_att_mtu(chan) - data->buf->len < data->rsp->len) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Fast forward to next group position */ |
| data->group = net_buf_add(data->buf, sizeof(*data->group)); |
| |
| /* Initialize group handle range */ |
| data->group->start_handle = sys_cpu_to_le16(handle); |
| data->group->end_handle = sys_cpu_to_le16(handle); |
| |
| /* Read attribute value and store in the buffer */ |
| read = att_chan_read(chan, attr, data->buf, 0, attr_read_group_cb, |
| data); |
| if (read < 0) { |
| /* TODO: Handle read errors */ |
| return BT_GATT_ITER_STOP; |
| } |
| |
| if (!data->group) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* continue only if there are still space for more items */ |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_read_group_rsp(struct bt_att_chan *chan, struct bt_uuid *uuid, |
| uint16_t start_handle, uint16_t end_handle) |
| { |
| struct read_group_data data; |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_READ_GROUP_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| data.chan = chan; |
| data.uuid = uuid; |
| data.rsp = net_buf_add(data.buf, sizeof(*data.rsp)); |
| data.rsp->len = 0U; |
| data.group = NULL; |
| |
| bt_gatt_foreach_attr(start_handle, end_handle, read_group_cb, &data); |
| |
| if (!data.rsp->len) { |
| net_buf_unref(data.buf); |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_READ_GROUP_REQ, start_handle, |
| BT_ATT_ERR_ATTRIBUTE_NOT_FOUND); |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_read_group_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_read_group_req *req; |
| uint16_t start_handle, end_handle, err_handle; |
| union { |
| struct bt_uuid uuid; |
| struct bt_uuid_16 u16; |
| struct bt_uuid_128 u128; |
| } u; |
| uint8_t uuid_len = buf->len - sizeof(*req); |
| |
| /* Type can only be UUID16 or UUID128 */ |
| if (uuid_len != 2 && uuid_len != 16) { |
| return BT_ATT_ERR_INVALID_PDU; |
| } |
| |
| req = net_buf_pull_mem(buf, sizeof(*req)); |
| |
| start_handle = sys_le16_to_cpu(req->start_handle); |
| end_handle = sys_le16_to_cpu(req->end_handle); |
| |
| if (!bt_uuid_create(&u.uuid, req->uuid, uuid_len)) { |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| LOG_DBG("start_handle 0x%04x end_handle 0x%04x type %s", start_handle, end_handle, |
| bt_uuid_str(&u.uuid)); |
| |
| if (!range_is_valid(start_handle, end_handle, &err_handle)) { |
| send_err_rsp(chan, BT_ATT_OP_READ_GROUP_REQ, err_handle, |
| BT_ATT_ERR_INVALID_HANDLE); |
| return 0; |
| } |
| |
| /* Core v4.2, Vol 3, sec 2.5.3 Attribute Grouping: |
| * Not all of the grouping attributes can be used in the ATT |
| * Read By Group Type Request. The "Primary Service" and "Secondary |
| * Service" grouping types may be used in the Read By Group Type |
| * Request. The "Characteristic" grouping type shall not be used in |
| * the ATT Read By Group Type Request. |
| */ |
| if (bt_uuid_cmp(&u.uuid, BT_UUID_GATT_PRIMARY) && |
| bt_uuid_cmp(&u.uuid, BT_UUID_GATT_SECONDARY)) { |
| send_err_rsp(chan, BT_ATT_OP_READ_GROUP_REQ, start_handle, |
| BT_ATT_ERR_UNSUPPORTED_GROUP_TYPE); |
| return 0; |
| } |
| |
| return att_read_group_rsp(chan, &u.uuid, start_handle, end_handle); |
| } |
| |
| struct write_data { |
| struct bt_conn *conn; |
| struct net_buf *buf; |
| uint8_t req; |
| const void *value; |
| uint16_t len; |
| uint16_t offset; |
| uint8_t err; |
| }; |
| |
| static bool attr_write_authorize(struct bt_conn *conn, |
| const struct bt_gatt_attr *attr) |
| { |
| if (!IS_ENABLED(CONFIG_BT_GATT_AUTHORIZATION_CUSTOM)) { |
| return true; |
| } |
| |
| if (!authorization_cb || !authorization_cb->write_authorize) { |
| return true; |
| } |
| |
| return authorization_cb->write_authorize(conn, attr); |
| } |
| |
| static uint8_t write_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct write_data *data = user_data; |
| int write; |
| uint8_t flags = 0U; |
| |
| LOG_DBG("handle 0x%04x offset %u", handle, data->offset); |
| |
| /* Check attribute permissions */ |
| data->err = bt_gatt_check_perm(data->conn, attr, |
| BT_GATT_PERM_WRITE_MASK); |
| if (data->err) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check the attribute authorization logic */ |
| if (!attr_write_authorize(data->conn, attr)) { |
| data->err = BT_ATT_ERR_AUTHORIZATION; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Set command flag if not a request */ |
| if (!data->req) { |
| flags |= BT_GATT_WRITE_FLAG_CMD; |
| } else if (data->req == BT_ATT_OP_EXEC_WRITE_REQ) { |
| flags |= BT_GATT_WRITE_FLAG_EXECUTE; |
| } |
| |
| /* Write attribute value */ |
| write = attr->write(data->conn, attr, data->value, data->len, |
| data->offset, flags); |
| if (write < 0 || write != data->len) { |
| data->err = err_to_att(write); |
| return BT_GATT_ITER_STOP; |
| } |
| |
| data->err = 0U; |
| |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_write_rsp(struct bt_att_chan *chan, uint8_t req, uint8_t rsp, |
| uint16_t handle, uint16_t offset, const void *value, |
| uint16_t len) |
| { |
| struct write_data data; |
| |
| if (!bt_gatt_change_aware(chan->att->conn, req ? true : false)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| |
| if (!handle) { |
| return BT_ATT_ERR_INVALID_HANDLE; |
| } |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| /* Only allocate buf if required to respond */ |
| if (rsp) { |
| data.buf = bt_att_chan_create_pdu(chan, rsp, 0); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| } |
| |
| data.conn = chan->att->conn; |
| data.req = req; |
| data.offset = offset; |
| data.value = value; |
| data.len = len; |
| data.err = BT_ATT_ERR_INVALID_HANDLE; |
| |
| bt_gatt_foreach_attr(handle, handle, write_cb, &data); |
| |
| if (data.err) { |
| /* In case of error discard data and respond with an error */ |
| if (rsp) { |
| net_buf_unref(data.buf); |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, req, handle, data.err); |
| } |
| return req == BT_ATT_OP_EXEC_WRITE_REQ ? data.err : 0; |
| } |
| |
| if (data.buf) { |
| bt_att_chan_send_rsp(chan, data.buf); |
| } |
| |
| return 0; |
| } |
| |
| static uint8_t att_write_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| uint16_t handle; |
| |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| return att_write_rsp(chan, BT_ATT_OP_WRITE_REQ, BT_ATT_OP_WRITE_RSP, |
| handle, 0, buf->data, buf->len); |
| } |
| |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| struct prep_data { |
| struct bt_conn *conn; |
| struct net_buf *buf; |
| const void *value; |
| uint16_t len; |
| uint16_t offset; |
| uint8_t err; |
| }; |
| |
| static uint8_t prep_write_cb(const struct bt_gatt_attr *attr, uint16_t handle, |
| void *user_data) |
| { |
| struct prep_data *data = user_data; |
| struct bt_attr_data *attr_data; |
| int write; |
| |
| LOG_DBG("handle 0x%04x offset %u", handle, data->offset); |
| |
| /* Check attribute permissions */ |
| data->err = bt_gatt_check_perm(data->conn, attr, |
| BT_GATT_PERM_WRITE_MASK); |
| if (data->err) { |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check the attribute authorization logic */ |
| if (!attr_write_authorize(data->conn, attr)) { |
| data->err = BT_ATT_ERR_AUTHORIZATION; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| /* Check if attribute requires handler to accept the data */ |
| if (!(attr->perm & BT_GATT_PERM_PREPARE_WRITE)) { |
| goto append; |
| } |
| |
| /* Write attribute value to check if device is authorized */ |
| write = attr->write(data->conn, attr, data->value, data->len, |
| data->offset, BT_GATT_WRITE_FLAG_PREPARE); |
| if (write != 0) { |
| data->err = err_to_att(write); |
| return BT_GATT_ITER_STOP; |
| } |
| |
| append: |
| /* Copy data into the outstanding queue */ |
| data->buf = net_buf_alloc(&prep_pool, K_NO_WAIT); |
| if (!data->buf) { |
| data->err = BT_ATT_ERR_PREPARE_QUEUE_FULL; |
| return BT_GATT_ITER_STOP; |
| } |
| |
| attr_data = net_buf_user_data(data->buf); |
| attr_data->handle = handle; |
| attr_data->offset = data->offset; |
| |
| net_buf_add_mem(data->buf, data->value, data->len); |
| |
| data->err = 0U; |
| |
| return BT_GATT_ITER_CONTINUE; |
| } |
| |
| static uint8_t att_prep_write_rsp(struct bt_att_chan *chan, uint16_t handle, |
| uint16_t offset, const void *value, uint8_t len) |
| { |
| struct prep_data data; |
| struct bt_att_prepare_write_rsp *rsp; |
| |
| if (!bt_gatt_change_aware(chan->att->conn, true)) { |
| if (!atomic_test_and_set_bit(chan->flags, ATT_OUT_OF_SYNC_SENT)) { |
| return BT_ATT_ERR_DB_OUT_OF_SYNC; |
| } else { |
| return 0; |
| } |
| } |
| |
| if (!handle) { |
| return BT_ATT_ERR_INVALID_HANDLE; |
| } |
| |
| (void)memset(&data, 0, sizeof(data)); |
| |
| data.conn = chan->att->conn; |
| data.offset = offset; |
| data.value = value; |
| data.len = len; |
| data.err = BT_ATT_ERR_INVALID_HANDLE; |
| |
| bt_gatt_foreach_attr(handle, handle, prep_write_cb, &data); |
| |
| if (data.err) { |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_PREPARE_WRITE_REQ, handle, |
| data.err); |
| return 0; |
| } |
| |
| LOG_DBG("buf %p handle 0x%04x offset %u", data.buf, handle, offset); |
| |
| /* Store buffer in the outstanding queue */ |
| net_buf_slist_put(&chan->att->prep_queue, data.buf); |
| |
| /* Generate response */ |
| data.buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_PREPARE_WRITE_RSP); |
| if (!data.buf) { |
| return BT_ATT_ERR_INSUFFICIENT_RESOURCES; |
| } |
| |
| rsp = net_buf_add(data.buf, sizeof(*rsp)); |
| rsp->handle = sys_cpu_to_le16(handle); |
| rsp->offset = sys_cpu_to_le16(offset); |
| net_buf_add(data.buf, len); |
| memcpy(rsp->value, value, len); |
| |
| bt_att_chan_send_rsp(chan, data.buf); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT */ |
| |
| static uint8_t att_prepare_write_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| #if CONFIG_BT_ATT_PREPARE_COUNT == 0 |
| return BT_ATT_ERR_NOT_SUPPORTED; |
| #else |
| struct bt_att_prepare_write_req *req; |
| uint16_t handle, offset; |
| |
| req = net_buf_pull_mem(buf, sizeof(*req)); |
| |
| handle = sys_le16_to_cpu(req->handle); |
| offset = sys_le16_to_cpu(req->offset); |
| |
| LOG_DBG("handle 0x%04x offset %u", handle, offset); |
| |
| return att_prep_write_rsp(chan, handle, offset, buf->data, buf->len); |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT */ |
| } |
| |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| static uint8_t exec_write_reassemble(uint16_t handle, uint16_t offset, |
| sys_slist_t *list, |
| struct net_buf_simple *buf) |
| { |
| struct net_buf *entry, *next; |
| sys_snode_t *prev; |
| |
| prev = NULL; |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(list, entry, next, node) { |
| struct bt_attr_data *tmp_data = net_buf_user_data(entry); |
| |
| LOG_DBG("entry %p handle 0x%04x, offset %u", entry, tmp_data->handle, |
| tmp_data->offset); |
| |
| if (tmp_data->handle == handle) { |
| if (tmp_data->offset == 0) { |
| /* Multiple writes to the same handle can occur |
| * in a prepare write queue. If the offset is 0, |
| * that should mean that it's a new write to the |
| * same handle, and we break to process the |
| * first write. |
| */ |
| |
| LOG_DBG("tmp_data->offset == 0"); |
| break; |
| } |
| |
| if (tmp_data->offset != buf->len + offset) { |
| /* We require that the offset is increasing |
| * properly to avoid badly reassembled buffers |
| */ |
| |
| LOG_DBG("Bad offset %u (%u, %u)", tmp_data->offset, buf->len, |
| offset); |
| |
| return BT_ATT_ERR_INVALID_OFFSET; |
| } |
| |
| if (buf->len + entry->len > buf->size) { |
| return BT_ATT_ERR_INVALID_ATTRIBUTE_LEN; |
| } |
| |
| net_buf_simple_add_mem(buf, entry->data, entry->len); |
| sys_slist_remove(list, prev, &entry->node); |
| net_buf_unref(entry); |
| } else { |
| prev = &entry->node; |
| } |
| } |
| |
| return BT_ATT_ERR_SUCCESS; |
| } |
| |
| static uint8_t att_exec_write_rsp(struct bt_att_chan *chan, uint8_t flags) |
| { |
| struct net_buf *buf; |
| uint8_t err = 0U; |
| |
| /* The following code will iterate on all prepare writes in the |
| * prep_queue, and reassemble those that share the same handle. |
| * Once a handle has been reassembled, it is sent to the upper layers, |
| * and the next handle is processed |
| */ |
| while (!sys_slist_is_empty(&chan->att->prep_queue)) { |
| struct bt_attr_data *data; |
| uint16_t handle; |
| |
| NET_BUF_SIMPLE_DEFINE_STATIC(reassembled_data, |
| MIN(BT_ATT_MAX_ATTRIBUTE_LEN, |
| CONFIG_BT_ATT_PREPARE_COUNT * BT_ATT_BUF_SIZE)); |
| |
| buf = net_buf_slist_get(&chan->att->prep_queue); |
| data = net_buf_user_data(buf); |
| handle = data->handle; |
| |
| LOG_DBG("buf %p handle 0x%04x offset %u", buf, handle, data->offset); |
| |
| net_buf_simple_reset(&reassembled_data); |
| net_buf_simple_add_mem(&reassembled_data, buf->data, buf->len); |
| |
| err = exec_write_reassemble(handle, data->offset, |
| &chan->att->prep_queue, |
| &reassembled_data); |
| if (err != BT_ATT_ERR_SUCCESS) { |
| send_err_rsp(chan, BT_ATT_OP_EXEC_WRITE_REQ, |
| handle, err); |
| return 0; |
| } |
| |
| /* Just discard the data if an error was set */ |
| if (!err && flags == BT_ATT_FLAG_EXEC) { |
| err = att_write_rsp(chan, BT_ATT_OP_EXEC_WRITE_REQ, 0, |
| handle, data->offset, |
| reassembled_data.data, |
| reassembled_data.len); |
| if (err) { |
| /* Respond here since handle is set */ |
| send_err_rsp(chan, BT_ATT_OP_EXEC_WRITE_REQ, |
| data->handle, err); |
| } |
| } |
| |
| net_buf_unref(buf); |
| } |
| |
| if (err) { |
| return 0; |
| } |
| |
| /* Generate response */ |
| buf = bt_att_create_rsp_pdu(chan, BT_ATT_OP_EXEC_WRITE_RSP); |
| if (!buf) { |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| bt_att_chan_send_rsp(chan, buf); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT */ |
| |
| |
| static uint8_t att_exec_write_req(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| #if CONFIG_BT_ATT_PREPARE_COUNT == 0 |
| return BT_ATT_ERR_NOT_SUPPORTED; |
| #else |
| struct bt_att_exec_write_req *req; |
| |
| req = (void *)buf->data; |
| |
| LOG_DBG("flags 0x%02x", req->flags); |
| |
| return att_exec_write_rsp(chan, req->flags); |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT */ |
| } |
| |
| static uint8_t att_write_cmd(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| uint16_t handle; |
| |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| return att_write_rsp(chan, 0, 0, handle, 0, buf->data, buf->len); |
| } |
| |
| #if defined(CONFIG_BT_SIGNING) |
| static uint8_t att_signed_write_cmd(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_conn *conn = chan->chan.chan.conn; |
| struct bt_att_signed_write_cmd *req; |
| uint16_t handle; |
| int err; |
| |
| /* The Signed Write Without Response sub-procedure shall only be supported |
| * on the LE Fixed Channel Unenhanced ATT bearer. |
| */ |
| if (bt_att_is_enhanced(chan)) { |
| /* No response for this command */ |
| return 0; |
| } |
| |
| req = (void *)buf->data; |
| |
| handle = sys_le16_to_cpu(req->handle); |
| |
| LOG_DBG("handle 0x%04x", handle); |
| |
| /* Verifying data requires full buffer including attribute header */ |
| net_buf_push(buf, sizeof(struct bt_att_hdr)); |
| err = bt_smp_sign_verify(conn, buf); |
| if (err) { |
| LOG_ERR("Error verifying data"); |
| /* No response for this command */ |
| return 0; |
| } |
| |
| net_buf_pull(buf, sizeof(struct bt_att_hdr)); |
| net_buf_pull(buf, sizeof(*req)); |
| |
| return att_write_rsp(chan, 0, 0, handle, 0, buf->data, |
| buf->len - sizeof(struct bt_att_signature)); |
| } |
| #endif /* CONFIG_BT_SIGNING */ |
| |
| #if defined(CONFIG_BT_GATT_CLIENT) |
| #if defined(CONFIG_BT_ATT_RETRY_ON_SEC_ERR) |
| static int att_change_security(struct bt_conn *conn, uint8_t err) |
| { |
| bt_security_t sec; |
| |
| switch (err) { |
| case BT_ATT_ERR_INSUFFICIENT_ENCRYPTION: |
| if (conn->sec_level >= BT_SECURITY_L2) { |
| return -EALREADY; |
| } |
| sec = BT_SECURITY_L2; |
| break; |
| case BT_ATT_ERR_AUTHENTICATION: |
| if (conn->sec_level < BT_SECURITY_L2) { |
| /* BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part C] |
| * page 375: |
| * |
| * If an LTK is not available, the service request |
| * shall be rejected with the error code 'Insufficient |
| * Authentication'. |
| * Note: When the link is not encrypted, the error code |
| * "Insufficient Authentication" does not indicate that |
| * MITM protection is required. |
| */ |
| sec = BT_SECURITY_L2; |
| } else if (conn->sec_level < BT_SECURITY_L3) { |
| /* BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part C] |
| * page 375: |
| * |
| * If an authenticated pairing is required but only an |
| * unauthenticated pairing has occurred and the link is |
| * currently encrypted, the service request shall be |
| * rejected with the error code 'Insufficient |
| * Authentication'. |
| * Note: When unauthenticated pairing has occurred and |
| * the link is currently encrypted, the error code |
| * 'Insufficient Authentication' indicates that MITM |
| * protection is required. |
| */ |
| sec = BT_SECURITY_L3; |
| } else if (conn->sec_level < BT_SECURITY_L4) { |
| /* BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part C] |
| * page 375: |
| * |
| * If LE Secure Connections authenticated pairing is |
| * required but LE legacy pairing has occurred and the |
| * link is currently encrypted, the service request |
| * shall be rejected with the error code ''Insufficient |
| * Authentication'. |
| */ |
| sec = BT_SECURITY_L4; |
| } else { |
| return -EALREADY; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return bt_conn_set_security(conn, sec); |
| } |
| #endif /* CONFIG_BT_ATT_RETRY_ON_SEC_ERR */ |
| |
| static uint8_t att_error_rsp(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_error_rsp *rsp; |
| uint8_t err; |
| |
| rsp = (void *)buf->data; |
| |
| LOG_DBG("request 0x%02x handle 0x%04x error 0x%02x", rsp->request, |
| sys_le16_to_cpu(rsp->handle), rsp->error); |
| |
| /* Don't retry if there is no req pending or it has been cancelled. |
| * |
| * BLUETOOTH SPECIFICATION Version 5.2 [Vol 3, Part F] |
| * page 1423: |
| * |
| * If an error code is received in the ATT_ERROR_RSP PDU that is not |
| * understood by the client, for example an error code that was reserved |
| * for future use that is now being used in a future version of the |
| * specification, then the ATT_ERROR_RSP PDU shall still be considered to |
| * state that the given request cannot be performed for an unknown reason. |
| */ |
| if (!chan->req || chan->req == &cancel || !rsp->error) { |
| err = BT_ATT_ERR_UNLIKELY; |
| goto done; |
| } |
| |
| err = rsp->error; |
| |
| #if defined(CONFIG_BT_ATT_RETRY_ON_SEC_ERR) |
| int ret; |
| |
| /* Check if error can be handled by elevating security. */ |
| ret = att_change_security(chan->chan.chan.conn, err); |
| if (ret == 0 || ret == -EBUSY) { |
| /* ATT timeout work is normally cancelled in att_handle_rsp. |
| * However retrying is special case, so the timeout shall |
| * be cancelled here. |
| */ |
| k_work_cancel_delayable(&chan->timeout_work); |
| |
| chan->req->retrying = true; |
| return 0; |
| } |
| #endif /* CONFIG_BT_ATT_RETRY_ON_SEC_ERR */ |
| |
| done: |
| return att_handle_rsp(chan, NULL, 0, err); |
| } |
| |
| static uint8_t att_handle_find_info_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_find_type_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_read_type_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_read_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_read_blob_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| #if defined(CONFIG_BT_GATT_READ_MULTIPLE) |
| static uint8_t att_handle_read_mult_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| #endif /* CONFIG_BT_GATT_READ_MULTIPLE */ |
| |
| #if defined(CONFIG_BT_GATT_READ_MULT_VAR_LEN) |
| static uint8_t att_handle_read_mult_vl_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| #endif /* CONFIG_BT_GATT_READ_MULT_VAR_LEN */ |
| |
| static uint8_t att_handle_read_group_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_write_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_prepare_write_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_handle_exec_write_rsp(struct bt_att_chan *chan, |
| struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static uint8_t att_notify(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| uint16_t handle; |
| |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("chan %p handle 0x%04x", chan, handle); |
| |
| bt_gatt_notification(chan->att->conn, handle, buf->data, buf->len); |
| |
| return 0; |
| } |
| |
| static uint8_t att_indicate(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| uint16_t handle; |
| |
| handle = net_buf_pull_le16(buf); |
| |
| LOG_DBG("chan %p handle 0x%04x", chan, handle); |
| |
| bt_gatt_notification(chan->att->conn, handle, buf->data, buf->len); |
| |
| buf = bt_att_chan_create_pdu(chan, BT_ATT_OP_CONFIRM, 0); |
| if (!buf) { |
| return 0; |
| } |
| |
| bt_att_chan_send_rsp(chan, buf); |
| |
| return 0; |
| } |
| |
| static uint8_t att_notify_mult(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| LOG_DBG("chan %p", chan); |
| |
| bt_gatt_mult_notification(chan->att->conn, buf->data, buf->len); |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_GATT_CLIENT */ |
| |
| static uint8_t att_confirm(struct bt_att_chan *chan, struct net_buf *buf) |
| { |
| LOG_DBG(""); |
| |
| return att_handle_rsp(chan, buf->data, buf->len, 0); |
| } |
| |
| static const struct att_handler { |
| uint8_t op; |
| uint8_t expect_len; |
| att_type_t type; |
| uint8_t (*func)(struct bt_att_chan *chan, struct net_buf *buf); |
| } handlers[] = { |
| { BT_ATT_OP_MTU_REQ, |
| sizeof(struct bt_att_exchange_mtu_req), |
| ATT_REQUEST, |
| att_mtu_req }, |
| { BT_ATT_OP_FIND_INFO_REQ, |
| sizeof(struct bt_att_find_info_req), |
| ATT_REQUEST, |
| att_find_info_req }, |
| { BT_ATT_OP_FIND_TYPE_REQ, |
| sizeof(struct bt_att_find_type_req), |
| ATT_REQUEST, |
| att_find_type_req }, |
| { BT_ATT_OP_READ_TYPE_REQ, |
| sizeof(struct bt_att_read_type_req), |
| ATT_REQUEST, |
| att_read_type_req }, |
| { BT_ATT_OP_READ_REQ, |
| sizeof(struct bt_att_read_req), |
| ATT_REQUEST, |
| att_read_req }, |
| { BT_ATT_OP_READ_BLOB_REQ, |
| sizeof(struct bt_att_read_blob_req), |
| ATT_REQUEST, |
| att_read_blob_req }, |
| #if defined(CONFIG_BT_GATT_READ_MULTIPLE) |
| { BT_ATT_OP_READ_MULT_REQ, |
| BT_ATT_READ_MULT_MIN_LEN_REQ, |
| ATT_REQUEST, |
| att_read_mult_req }, |
| #endif /* CONFIG_BT_GATT_READ_MULTIPLE */ |
| #if defined(CONFIG_BT_GATT_READ_MULT_VAR_LEN) |
| { BT_ATT_OP_READ_MULT_VL_REQ, |
| BT_ATT_READ_MULT_MIN_LEN_REQ, |
| ATT_REQUEST, |
| att_read_mult_vl_req }, |
| #endif /* CONFIG_BT_GATT_READ_MULT_VAR_LEN */ |
| { BT_ATT_OP_READ_GROUP_REQ, |
| sizeof(struct bt_att_read_group_req), |
| ATT_REQUEST, |
| att_read_group_req }, |
| { BT_ATT_OP_WRITE_REQ, |
| sizeof(struct bt_att_write_req), |
| ATT_REQUEST, |
| att_write_req }, |
| { BT_ATT_OP_PREPARE_WRITE_REQ, |
| sizeof(struct bt_att_prepare_write_req), |
| ATT_REQUEST, |
| att_prepare_write_req }, |
| { BT_ATT_OP_EXEC_WRITE_REQ, |
| sizeof(struct bt_att_exec_write_req), |
| ATT_REQUEST, |
| att_exec_write_req }, |
| { BT_ATT_OP_CONFIRM, |
| 0, |
| ATT_CONFIRMATION, |
| att_confirm }, |
| { BT_ATT_OP_WRITE_CMD, |
| sizeof(struct bt_att_write_cmd), |
| ATT_COMMAND, |
| att_write_cmd }, |
| #if defined(CONFIG_BT_SIGNING) |
| { BT_ATT_OP_SIGNED_WRITE_CMD, |
| (sizeof(struct bt_att_write_cmd) + |
| sizeof(struct bt_att_signature)), |
| ATT_COMMAND, |
| att_signed_write_cmd }, |
| #endif /* CONFIG_BT_SIGNING */ |
| #if defined(CONFIG_BT_GATT_CLIENT) |
| { BT_ATT_OP_ERROR_RSP, |
| sizeof(struct bt_att_error_rsp), |
| ATT_RESPONSE, |
| att_error_rsp }, |
| { BT_ATT_OP_MTU_RSP, |
| sizeof(struct bt_att_exchange_mtu_rsp), |
| ATT_RESPONSE, |
| att_mtu_rsp }, |
| { BT_ATT_OP_FIND_INFO_RSP, |
| sizeof(struct bt_att_find_info_rsp), |
| ATT_RESPONSE, |
| att_handle_find_info_rsp }, |
| { BT_ATT_OP_FIND_TYPE_RSP, |
| sizeof(struct bt_att_handle_group), |
| ATT_RESPONSE, |
| att_handle_find_type_rsp }, |
| { BT_ATT_OP_READ_TYPE_RSP, |
| sizeof(struct bt_att_read_type_rsp), |
| ATT_RESPONSE, |
| att_handle_read_type_rsp }, |
| { BT_ATT_OP_READ_RSP, |
| 0, |
| ATT_RESPONSE, |
| att_handle_read_rsp }, |
| { BT_ATT_OP_READ_BLOB_RSP, |
| 0, |
| ATT_RESPONSE, |
| att_handle_read_blob_rsp }, |
| #if defined(CONFIG_BT_GATT_READ_MULTIPLE) |
| { BT_ATT_OP_READ_MULT_RSP, |
| 0, |
| ATT_RESPONSE, |
| att_handle_read_mult_rsp }, |
| #endif /* CONFIG_BT_GATT_READ_MULTIPLE */ |
| #if defined(CONFIG_BT_GATT_READ_MULT_VAR_LEN) |
| { BT_ATT_OP_READ_MULT_VL_RSP, |
| sizeof(struct bt_att_read_mult_vl_rsp), |
| ATT_RESPONSE, |
| att_handle_read_mult_vl_rsp }, |
| #endif /* CONFIG_BT_GATT_READ_MULT_VAR_LEN */ |
| { BT_ATT_OP_READ_GROUP_RSP, |
| sizeof(struct bt_att_read_group_rsp), |
| ATT_RESPONSE, |
| att_handle_read_group_rsp }, |
| { BT_ATT_OP_WRITE_RSP, |
| 0, |
| ATT_RESPONSE, |
| att_handle_write_rsp }, |
| { BT_ATT_OP_PREPARE_WRITE_RSP, |
| sizeof(struct bt_att_prepare_write_rsp), |
| ATT_RESPONSE, |
| att_handle_prepare_write_rsp }, |
| { BT_ATT_OP_EXEC_WRITE_RSP, |
| 0, |
| ATT_RESPONSE, |
| att_handle_exec_write_rsp }, |
| { BT_ATT_OP_NOTIFY, |
| sizeof(struct bt_att_notify), |
| ATT_NOTIFICATION, |
| att_notify }, |
| { BT_ATT_OP_INDICATE, |
| sizeof(struct bt_att_indicate), |
| ATT_INDICATION, |
| att_indicate }, |
| { BT_ATT_OP_NOTIFY_MULT, |
| sizeof(struct bt_att_notify_mult), |
| ATT_NOTIFICATION, |
| att_notify_mult }, |
| #endif /* CONFIG_BT_GATT_CLIENT */ |
| }; |
| |
| static att_type_t att_op_get_type(uint8_t op) |
| { |
| switch (op) { |
| case BT_ATT_OP_MTU_REQ: |
| case BT_ATT_OP_FIND_INFO_REQ: |
| case BT_ATT_OP_FIND_TYPE_REQ: |
| case BT_ATT_OP_READ_TYPE_REQ: |
| case BT_ATT_OP_READ_REQ: |
| case BT_ATT_OP_READ_BLOB_REQ: |
| case BT_ATT_OP_READ_MULT_REQ: |
| case BT_ATT_OP_READ_MULT_VL_REQ: |
| case BT_ATT_OP_READ_GROUP_REQ: |
| case BT_ATT_OP_WRITE_REQ: |
| case BT_ATT_OP_PREPARE_WRITE_REQ: |
| case BT_ATT_OP_EXEC_WRITE_REQ: |
| return ATT_REQUEST; |
| case BT_ATT_OP_CONFIRM: |
| return ATT_CONFIRMATION; |
| case BT_ATT_OP_WRITE_CMD: |
| case BT_ATT_OP_SIGNED_WRITE_CMD: |
| return ATT_COMMAND; |
| case BT_ATT_OP_ERROR_RSP: |
| case BT_ATT_OP_MTU_RSP: |
| case BT_ATT_OP_FIND_INFO_RSP: |
| case BT_ATT_OP_FIND_TYPE_RSP: |
| case BT_ATT_OP_READ_TYPE_RSP: |
| case BT_ATT_OP_READ_RSP: |
| case BT_ATT_OP_READ_BLOB_RSP: |
| case BT_ATT_OP_READ_MULT_RSP: |
| case BT_ATT_OP_READ_MULT_VL_RSP: |
| case BT_ATT_OP_READ_GROUP_RSP: |
| case BT_ATT_OP_WRITE_RSP: |
| case BT_ATT_OP_PREPARE_WRITE_RSP: |
| case BT_ATT_OP_EXEC_WRITE_RSP: |
| return ATT_RESPONSE; |
| case BT_ATT_OP_NOTIFY: |
| case BT_ATT_OP_NOTIFY_MULT: |
| return ATT_NOTIFICATION; |
| case BT_ATT_OP_INDICATE: |
| return ATT_INDICATION; |
| } |
| |
| if (op & ATT_CMD_MASK) { |
| return ATT_COMMAND; |
| } |
| |
| return ATT_UNKNOWN; |
| } |
| |
| static struct bt_conn *get_conn(struct bt_att_chan *att_chan) |
| { |
| return att_chan->chan.chan.conn; |
| } |
| |
| static int bt_att_recv(struct bt_l2cap_chan *chan, struct net_buf *buf) |
| { |
| struct bt_att_chan *att_chan = ATT_CHAN(chan); |
| struct bt_conn *conn = get_conn(att_chan); |
| struct bt_att_hdr *hdr; |
| const struct att_handler *handler; |
| uint8_t err; |
| size_t i; |
| |
| if (buf->len < sizeof(*hdr)) { |
| LOG_ERR("Too small ATT PDU received"); |
| return 0; |
| } |
| |
| hdr = net_buf_pull_mem(buf, sizeof(*hdr)); |
| LOG_DBG("Received ATT chan %p code 0x%02x len %zu", att_chan, hdr->code, |
| net_buf_frags_len(buf)); |
| |
| if (conn->state != BT_CONN_CONNECTED) { |
| LOG_DBG("not connected: conn %p state %u", conn, conn->state); |
| return 0; |
| } |
| |
| if (!att_chan->att) { |
| LOG_DBG("Ignore recv on detached ATT chan"); |
| return 0; |
| } |
| |
| for (i = 0, handler = NULL; i < ARRAY_SIZE(handlers); i++) { |
| if (hdr->code == handlers[i].op) { |
| handler = &handlers[i]; |
| break; |
| } |
| } |
| |
| if (!handler) { |
| LOG_WRN("Unhandled ATT code 0x%02x", hdr->code); |
| if (att_op_get_type(hdr->code) != ATT_COMMAND && |
| att_op_get_type(hdr->code) != ATT_INDICATION) { |
| send_err_rsp(att_chan, hdr->code, 0, |
| BT_ATT_ERR_NOT_SUPPORTED); |
| } |
| return 0; |
| } |
| |
| if (buf->len < handler->expect_len) { |
| LOG_ERR("Invalid len %u for code 0x%02x", buf->len, hdr->code); |
| err = BT_ATT_ERR_INVALID_PDU; |
| } else { |
| err = handler->func(att_chan, buf); |
| } |
| |
| if (handler->type == ATT_REQUEST && err) { |
| LOG_DBG("ATT error 0x%02x", err); |
| send_err_rsp(att_chan, hdr->code, 0, err); |
| } |
| |
| return 0; |
| } |
| |
| static struct bt_att *att_get(struct bt_conn *conn) |
| { |
| struct bt_l2cap_chan *chan; |
| struct bt_att_chan *att_chan; |
| |
| if (conn->state != BT_CONN_CONNECTED) { |
| LOG_WRN("Not connected"); |
| return NULL; |
| } |
| |
| chan = bt_l2cap_le_lookup_rx_cid(conn, BT_L2CAP_CID_ATT); |
| if (!chan) { |
| LOG_ERR("Unable to find ATT channel"); |
| return NULL; |
| } |
| |
| att_chan = ATT_CHAN(chan); |
| if (!atomic_test_bit(att_chan->flags, ATT_CONNECTED)) { |
| LOG_ERR("ATT channel not connected"); |
| return NULL; |
| } |
| |
| return att_chan->att; |
| } |
| |
| struct net_buf *bt_att_create_pdu(struct bt_conn *conn, uint8_t op, size_t len) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan, *tmp; |
| |
| att = att_get(conn); |
| if (!att) { |
| return NULL; |
| } |
| |
| /* This allocator should _not_ be used for RSPs. */ |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| if (len + sizeof(op) > bt_att_mtu(chan)) { |
| continue; |
| } |
| |
| return bt_att_chan_create_pdu(chan, op, len); |
| } |
| |
| LOG_WRN("No ATT channel for MTU %zu", len + sizeof(op)); |
| |
| return NULL; |
| } |
| |
| struct net_buf *bt_att_create_rsp_pdu(struct bt_att_chan *chan, uint8_t op) |
| { |
| size_t headroom; |
| struct bt_att_hdr *hdr; |
| struct bt_att_tx_meta_data *data; |
| struct net_buf *buf; |
| |
| buf = net_buf_alloc(&att_pool, BT_ATT_TIMEOUT); |
| if (!buf) { |
| LOG_ERR("Unable to allocate buffer for op 0x%02x", op); |
| return NULL; |
| } |
| |
| headroom = BT_L2CAP_BUF_SIZE(0); |
| |
| if (bt_att_is_enhanced(chan)) { |
| headroom += BT_L2CAP_SDU_HDR_SIZE; |
| } |
| |
| net_buf_reserve(buf, headroom); |
| |
| data = bt_att_get_tx_meta_data(buf); |
| data->att_chan = chan; |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = op; |
| |
| return buf; |
| } |
| |
| static void att_reset(struct bt_att *att) |
| { |
| struct net_buf *buf; |
| |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| /* Discard queued buffers */ |
| while ((buf = net_buf_slist_get(&att->prep_queue))) { |
| net_buf_unref(buf); |
| } |
| #endif /* CONFIG_BT_ATT_PREPARE_COUNT > 0 */ |
| |
| #if defined(CONFIG_BT_EATT) |
| struct k_work_sync sync; |
| |
| (void)k_work_cancel_delayable_sync(&att->eatt.connection_work, &sync); |
| #endif /* CONFIG_BT_EATT */ |
| |
| while ((buf = k_fifo_get(&att->tx_queue, K_NO_WAIT))) { |
| net_buf_unref(buf); |
| } |
| |
| /* Notify pending requests */ |
| while (!sys_slist_is_empty(&att->reqs)) { |
| struct bt_att_req *req; |
| sys_snode_t *node; |
| |
| node = sys_slist_get_not_empty(&att->reqs); |
| req = CONTAINER_OF(node, struct bt_att_req, node); |
| if (req->func) { |
| req->func(att->conn, -ECONNRESET, NULL, 0, |
| req->user_data); |
| } |
| |
| bt_att_req_free(req); |
| } |
| |
| /* FIXME: `att->conn` is not reference counted. Consider using `bt_conn_ref` |
| * and `bt_conn_unref` to follow convention. |
| */ |
| att->conn = NULL; |
| k_mem_slab_free(&att_slab, (void *)att); |
| } |
| |
| static void att_chan_detach(struct bt_att_chan *chan) |
| { |
| struct net_buf *buf; |
| |
| LOG_DBG("chan %p", chan); |
| |
| sys_slist_find_and_remove(&chan->att->chans, &chan->node); |
| |
| /* Release pending buffers */ |
| while ((buf = k_fifo_get(&chan->tx_queue, K_NO_WAIT))) { |
| net_buf_unref(buf); |
| } |
| |
| if (chan->req) { |
| /* Notify outstanding request */ |
| att_handle_rsp(chan, NULL, 0, -ECONNRESET); |
| } |
| |
| chan->att = NULL; |
| atomic_clear_bit(chan->flags, ATT_CONNECTED); |
| } |
| |
| static void att_timeout(struct k_work *work) |
| { |
| char addr[BT_ADDR_LE_STR_LEN]; |
| struct k_work_delayable *dwork = k_work_delayable_from_work(work); |
| struct bt_att_chan *chan = CONTAINER_OF(dwork, struct bt_att_chan, |
| timeout_work); |
| int err; |
| |
| bt_addr_le_to_str(bt_conn_get_dst(chan->att->conn), addr, sizeof(addr)); |
| LOG_ERR("ATT Timeout for device %s. Disconnecting...", addr); |
| |
| /* BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F] page 480: |
| * |
| * A transaction not completed within 30 seconds shall time out. Such a |
| * transaction shall be considered to have failed and the local higher |
| * layers shall be informed of this failure. No more attribute protocol |
| * requests, commands, indications or notifications shall be sent to the |
| * target device on this ATT Bearer. |
| */ |
| bt_att_disconnected(&chan->chan.chan); |
| |
| /* The timeout state is local and can block new ATT operations, but does not affect the |
| * remote side. Disconnecting the GATT connection upon ATT timeout simplifies error handling |
| * for developers. This reduces rare failure conditions to a common one, allowing developers |
| * to handle unexpected disconnections without needing special cases for ATT timeouts. |
| */ |
| err = bt_conn_disconnect(chan->chan.chan.conn, BT_HCI_ERR_REMOTE_USER_TERM_CONN); |
| if (err) { |
| LOG_ERR("Disconnecting failed (err %d)", err); |
| } |
| } |
| |
| static struct bt_att_chan *att_get_fixed_chan(struct bt_conn *conn) |
| { |
| struct bt_l2cap_chan *chan; |
| |
| chan = bt_l2cap_le_lookup_tx_cid(conn, BT_L2CAP_CID_ATT); |
| __ASSERT(chan, "No ATT channel found"); |
| |
| return ATT_CHAN(chan); |
| } |
| |
| static void att_chan_attach(struct bt_att *att, struct bt_att_chan *chan) |
| { |
| LOG_DBG("att %p chan %p flags %lu", att, chan, atomic_get(chan->flags)); |
| |
| if (sys_slist_is_empty(&att->chans)) { |
| /* Init general queues when attaching the first channel */ |
| k_fifo_init(&att->tx_queue); |
| #if CONFIG_BT_ATT_PREPARE_COUNT > 0 |
| sys_slist_init(&att->prep_queue); |
| #endif |
| } |
| |
| sys_slist_prepend(&att->chans, &chan->node); |
| } |
| |
| static void bt_att_connected(struct bt_l2cap_chan *chan) |
| { |
| struct bt_att_chan *att_chan = ATT_CHAN(chan); |
| struct bt_l2cap_le_chan *le_chan = BT_L2CAP_LE_CHAN(chan); |
| |
| LOG_DBG("chan %p cid 0x%04x", le_chan, le_chan->tx.cid); |
| |
| atomic_set_bit(att_chan->flags, ATT_CONNECTED); |
| |
| att_chan_mtu_updated(att_chan); |
| |
| k_work_init_delayable(&att_chan->timeout_work, att_timeout); |
| |
| bt_gatt_connected(le_chan->chan.conn); |
| } |
| |
| static void bt_att_disconnected(struct bt_l2cap_chan *chan) |
| { |
| struct bt_att_chan *att_chan = ATT_CHAN(chan); |
| struct bt_att *att = att_chan->att; |
| struct bt_l2cap_le_chan *le_chan = BT_L2CAP_LE_CHAN(chan); |
| |
| LOG_DBG("chan %p cid 0x%04x", le_chan, le_chan->tx.cid); |
| |
| if (!att_chan->att) { |
| LOG_DBG("Ignore disconnect on detached ATT chan"); |
| return; |
| } |
| |
| att_chan_detach(att_chan); |
| |
| /* Don't reset if there are still channels to be used */ |
| if (!sys_slist_is_empty(&att->chans)) { |
| return; |
| } |
| |
| att_reset(att); |
| |
| bt_gatt_disconnected(le_chan->chan.conn); |
| } |
| |
| #if defined(CONFIG_BT_SMP) |
| static uint8_t att_req_retry(struct bt_att_chan *att_chan) |
| { |
| struct bt_att_req *req = att_chan->req; |
| struct net_buf *buf; |
| |
| /* Resend buffer */ |
| if (!req->encode) { |
| /* This request does not support resending */ |
| return BT_ATT_ERR_AUTHENTICATION; |
| } |
| |
| |
| buf = bt_att_chan_create_pdu(att_chan, req->att_op, req->len); |
| if (!buf) { |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| if (req->encode(buf, req->len, req->user_data)) { |
| net_buf_unref(buf); |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| if (chan_send(att_chan, buf)) { |
| net_buf_unref(buf); |
| return BT_ATT_ERR_UNLIKELY; |
| } |
| |
| return BT_ATT_ERR_SUCCESS; |
| } |
| |
| static void bt_att_encrypt_change(struct bt_l2cap_chan *chan, |
| uint8_t hci_status) |
| { |
| struct bt_att_chan *att_chan = ATT_CHAN(chan); |
| struct bt_l2cap_le_chan *le_chan = BT_L2CAP_LE_CHAN(chan); |
| struct bt_conn *conn = le_chan->chan.conn; |
| uint8_t err; |
| |
| LOG_DBG("chan %p conn %p handle %u sec_level 0x%02x status 0x%02x %s", le_chan, conn, |
| conn->handle, conn->sec_level, hci_status, bt_hci_err_to_str(hci_status)); |
| |
| if (!att_chan->att) { |
| LOG_DBG("Ignore encrypt change on detached ATT chan"); |
| return; |
| } |
| |
| /* |
| * If status (HCI status of security procedure) is non-zero, notify |
| * outstanding request about security failure. |
| */ |
| if (hci_status) { |
| if (att_chan->req && att_chan->req->retrying) { |
| att_handle_rsp(att_chan, NULL, 0, |
| BT_ATT_ERR_AUTHENTICATION); |
| } |
| |
| return; |
| } |
| |
| bt_gatt_encrypt_change(conn); |
| |
| if (conn->sec_level == BT_SECURITY_L1) { |
| return; |
| } |
| |
| if (!(att_chan->req && att_chan->req->retrying)) { |
| return; |
| } |
| |
| LOG_DBG("Retrying"); |
| |
| err = att_req_retry(att_chan); |
| if (err) { |
| LOG_DBG("Retry failed (%d)", err); |
| att_handle_rsp(att_chan, NULL, 0, err); |
| } |
| } |
| #endif /* CONFIG_BT_SMP */ |
| |
| static void bt_att_status(struct bt_l2cap_chan *ch, atomic_t *status) |
| { |
| struct bt_att_chan *chan = ATT_CHAN(ch); |
| sys_snode_t *node; |
| |
| LOG_DBG("chan %p status %p", ch, status); |
| |
| if (!atomic_test_bit(status, BT_L2CAP_STATUS_OUT)) { |
| return; |
| } |
| |
| if (!chan->att) { |
| LOG_DBG("Ignore status on detached ATT chan"); |
| return; |
| } |
| |
| /* If there is a request pending don't attempt to send */ |
| if (chan->req) { |
| return; |
| } |
| |
| /* Pull next request from the list */ |
| node = sys_slist_get(&chan->att->reqs); |
| if (!node) { |
| return; |
| } |
| |
| if (bt_att_chan_req_send(chan, ATT_REQ(node)) >= 0) { |
| return; |
| } |
| |
| /* Prepend back to the list as it could not be sent */ |
| sys_slist_prepend(&chan->att->reqs, node); |
| } |
| |
| static void bt_att_released(struct bt_l2cap_chan *ch) |
| { |
| struct bt_att_chan *chan = ATT_CHAN(ch); |
| |
| LOG_DBG("chan %p", chan); |
| |
| k_mem_slab_free(&chan_slab, (void *)chan); |
| } |
| |
| #if defined(CONFIG_BT_EATT) |
| static void bt_att_reconfigured(struct bt_l2cap_chan *l2cap_chan) |
| { |
| struct bt_att_chan *att_chan = ATT_CHAN(l2cap_chan); |
| |
| LOG_DBG("chan %p", att_chan); |
| |
| att_chan_mtu_updated(att_chan); |
| } |
| #endif /* CONFIG_BT_EATT */ |
| |
| static struct bt_att_chan *att_chan_new(struct bt_att *att, atomic_val_t flags) |
| { |
| int quota = 0; |
| static struct bt_l2cap_chan_ops ops = { |
| .connected = bt_att_connected, |
| .disconnected = bt_att_disconnected, |
| .recv = bt_att_recv, |
| .sent = bt_att_sent, |
| .status = bt_att_status, |
| #if defined(CONFIG_BT_SMP) |
| .encrypt_change = bt_att_encrypt_change, |
| #endif /* CONFIG_BT_SMP */ |
| .released = bt_att_released, |
| #if defined(CONFIG_BT_EATT) |
| .reconfigured = bt_att_reconfigured, |
| #endif /* CONFIG_BT_EATT */ |
| }; |
| struct bt_att_chan *chan; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| if (chan->att == att) { |
| quota++; |
| } |
| |
| if (quota == ATT_CHAN_MAX) { |
| LOG_DBG("Maximum number of channels reached: %d", quota); |
| return NULL; |
| } |
| } |
| |
| if (k_mem_slab_alloc(&chan_slab, (void **)&chan, K_NO_WAIT)) { |
| LOG_WRN("No available ATT channel for conn %p", att->conn); |
| return NULL; |
| } |
| |
| (void)memset(chan, 0, sizeof(*chan)); |
| chan->chan.chan.ops = &ops; |
| k_fifo_init(&chan->tx_queue); |
| atomic_set(chan->flags, flags); |
| chan->att = att; |
| att_chan_attach(att, chan); |
| |
| if (bt_att_is_enhanced(chan)) { |
| /* EATT: The MTU will be sent in the ECRED conn req/rsp PDU. The |
| * TX MTU is received on L2CAP-level. |
| */ |
| chan->chan.rx.mtu = BT_LOCAL_ATT_MTU_EATT; |
| } else { |
| /* UATT: L2CAP Basic is not able to communicate the L2CAP MTU |
| * without help. ATT has to manage the MTU. The initial MTU is |
| * defined by spec. |
| */ |
| chan->chan.tx.mtu = BT_ATT_DEFAULT_LE_MTU; |
| chan->chan.rx.mtu = BT_ATT_DEFAULT_LE_MTU; |
| } |
| |
| return chan; |
| } |
| |
| #if defined(CONFIG_BT_EATT) |
| size_t bt_eatt_count(struct bt_conn *conn) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan; |
| size_t eatt_count = 0; |
| |
| if (!conn) { |
| return 0; |
| } |
| |
| att = att_get(conn); |
| if (!att) { |
| return 0; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| if (bt_att_is_enhanced(chan) && |
| atomic_test_bit(chan->flags, ATT_CONNECTED)) { |
| eatt_count++; |
| } |
| } |
| |
| return eatt_count; |
| } |
| |
| static void att_enhanced_connection_work_handler(struct k_work *work) |
| { |
| const struct k_work_delayable *dwork = k_work_delayable_from_work(work); |
| const struct bt_att *att = CONTAINER_OF(dwork, struct bt_att, eatt.connection_work); |
| const int err = bt_eatt_connect(att->conn, att->eatt.chans_to_connect); |
| |
| if (err == -ENOMEM) { |
| LOG_DBG("Failed to connect %d EATT channels, central has probably " |
| "already established some.", |
| att->eatt.chans_to_connect); |
| } else if (err < 0) { |
| LOG_WRN("Failed to connect %d EATT channels (err: %d)", att->eatt.chans_to_connect, |
| err); |
| } |
| |
| } |
| #endif /* CONFIG_BT_EATT */ |
| |
| static int bt_att_accept(struct bt_conn *conn, struct bt_l2cap_chan **ch) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan; |
| |
| LOG_DBG("conn %p handle %u", conn, conn->handle); |
| |
| if (k_mem_slab_alloc(&att_slab, (void **)&att, K_NO_WAIT)) { |
| LOG_ERR("No available ATT context for conn %p", conn); |
| return -ENOMEM; |
| } |
| |
| att_handle_rsp_thread = k_current_get(); |
| |
| (void)memset(att, 0, sizeof(*att)); |
| att->conn = conn; |
| sys_slist_init(&att->reqs); |
| sys_slist_init(&att->chans); |
| |
| #if defined(CONFIG_BT_EATT) |
| k_work_init_delayable(&att->eatt.connection_work, |
| att_enhanced_connection_work_handler); |
| #endif /* CONFIG_BT_EATT */ |
| |
| chan = att_chan_new(att, 0); |
| if (!chan) { |
| return -ENOMEM; |
| } |
| |
| *ch = &chan->chan.chan; |
| |
| return 0; |
| } |
| |
| /* The L2CAP channel section is sorted lexicographically. Make sure that ATT fixed channel will be |
| * placed as the last one to ensure that SMP channel is properly initialized before bt_att_connected |
| * tries to send security request. |
| */ |
| BT_L2CAP_CHANNEL_DEFINE(z_att_fixed_chan, BT_L2CAP_CID_ATT, bt_att_accept, NULL); |
| |
| #if defined(CONFIG_BT_EATT) |
| static k_timeout_t credit_based_connection_delay(struct bt_conn *conn) |
| { |
| /* |
| * 5.3 Vol 3, Part G, Section 5.4 L2CAP COLLISION MITIGATION |
| * ... In this situation, the Central may retry |
| * immediately but the Peripheral shall wait a minimum of 100 ms before retrying; |
| * on LE connections, the Peripheral shall wait at least 2 * |
| * (connPeripheralLatency + 1) * connInterval if that is longer. |
| */ |
| |
| if (IS_ENABLED(CONFIG_BT_CENTRAL) && conn->role == BT_CONN_ROLE_CENTRAL) { |
| return K_NO_WAIT; |
| } else if (IS_ENABLED(CONFIG_BT_PERIPHERAL)) { |
| uint8_t random; |
| int err; |
| |
| err = bt_rand(&random, sizeof(random)); |
| if (err) { |
| random = 0; |
| } |
| |
| const uint8_t rand_delay = random & 0x7; /* Small random delay for IOP */ |
| /* The maximum value of (latency + 1) * 2 multiplied with the |
| * maximum connection interval has a maximum value of |
| * 4000000000 which can be stored in 32-bits, so this won't |
| * result in an overflow |
| */ |
| const uint32_t calculated_delay_us = |
| 2 * (conn->le.latency + 1) * BT_CONN_INTERVAL_TO_US(conn->le.interval); |
| const uint32_t calculated_delay_ms = calculated_delay_us / USEC_PER_MSEC; |
| |
| return K_MSEC(MAX(100, calculated_delay_ms + rand_delay)); |
| } |
| |
| /* Must be either central or peripheral */ |
| __ASSERT_NO_MSG(false); |
| CODE_UNREACHABLE; |
| } |
| |
| static int att_schedule_eatt_connect(struct bt_conn *conn, uint8_t chans_to_connect) |
| { |
| struct bt_att *att = att_get(conn); |
| |
| if (!att) { |
| return -ENOTCONN; |
| } |
| |
| att->eatt.chans_to_connect = chans_to_connect; |
| |
| return k_work_reschedule(&att->eatt.connection_work, |
| credit_based_connection_delay(conn)); |
| } |
| |
| static void handle_potential_collision(struct bt_att *att) |
| { |
| __ASSERT_NO_MSG(att); |
| |
| int err; |
| size_t to_connect = att->eatt.prev_conn_req_missing_chans; |
| |
| if (att->eatt.prev_conn_rsp_result == BT_L2CAP_LE_ERR_NO_RESOURCES && |
| att->eatt.prev_conn_req_result == BT_L2CAP_LE_ERR_NO_RESOURCES) { |
| LOG_DBG("Credit based connection request collision detected"); |
| |
| /* Reset to not keep retrying on repeated failures */ |
| att->eatt.prev_conn_rsp_result = 0; |
| att->eatt.prev_conn_req_result = 0; |
| att->eatt.prev_conn_req_missing_chans = 0; |
| |
| if (to_connect == 0) { |
| return; |
| } |
| |
| err = att_schedule_eatt_connect(att->conn, to_connect); |
| if (err < 0) { |
| LOG_ERR("Failed to schedule EATT connection retry (err: %d)", err); |
| } |
| } |
| } |
| |
| static void ecred_connect_req_cb(struct bt_conn *conn, uint16_t result, uint16_t psm) |
| { |
| struct bt_att *att = att_get(conn); |
| |
| if (!att) { |
| return; |
| } |
| |
| if (psm != BT_EATT_PSM) { |
| /* Collision mitigation is only a requirement on the EATT PSM */ |
| return; |
| } |
| |
| att->eatt.prev_conn_rsp_result = result; |
| |
| handle_potential_collision(att); |
| } |
| |
| static void ecred_connect_rsp_cb(struct bt_conn *conn, uint16_t result, |
| uint8_t attempted_to_connect, uint8_t succeeded_to_connect, |
| uint16_t psm) |
| { |
| struct bt_att *att = att_get(conn); |
| |
| if (!att) { |
| return; |
| } |
| |
| if (psm != BT_EATT_PSM) { |
| /* Collision mitigation is only a requirement on the EATT PSM */ |
| return; |
| } |
| |
| att->eatt.prev_conn_req_result = result; |
| att->eatt.prev_conn_req_missing_chans = |
| attempted_to_connect - succeeded_to_connect; |
| |
| handle_potential_collision(att); |
| } |
| |
| int bt_eatt_connect(struct bt_conn *conn, size_t num_channels) |
| { |
| struct bt_att_chan *att_chan; |
| struct bt_att *att; |
| struct bt_l2cap_chan *chan[CONFIG_BT_EATT_MAX + 1] = {}; |
| size_t offset = 0; |
| size_t i = 0; |
| int err; |
| |
| if (!conn) { |
| return -EINVAL; |
| } |
| |
| /* Check the encryption level for EATT */ |
| if (bt_conn_get_security(conn) < BT_SECURITY_L2) { |
| /* Vol 3, Part G, Section 5.3.2 Channel Requirements states: |
| * The channel shall be encrypted. |
| */ |
| return -EPERM; |
| } |
| |
| if (num_channels > CONFIG_BT_EATT_MAX || num_channels == 0) { |
| return -EINVAL; |
| } |
| |
| att_chan = att_get_fixed_chan(conn); |
| att = att_chan->att; |
| |
| while (num_channels--) { |
| att_chan = att_chan_new(att, BIT(ATT_ENHANCED)); |
| if (!att_chan) { |
| break; |
| } |
| |
| chan[i] = &att_chan->chan.chan; |
| i++; |
| } |
| |
| if (!i) { |
| return -ENOMEM; |
| } |
| |
| while (offset < i) { |
| /* bt_l2cap_ecred_chan_connect() uses the first L2CAP_ECRED_CHAN_MAX_PER_REQ |
| * elements of the array or until a null-terminator is reached. |
| */ |
| err = bt_l2cap_ecred_chan_connect(conn, &chan[offset], BT_EATT_PSM); |
| if (err < 0) { |
| return err; |
| } |
| |
| offset += L2CAP_ECRED_CHAN_MAX_PER_REQ; |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_BT_EATT_AUTO_CONNECT) |
| static void eatt_auto_connect(struct bt_conn *conn, bt_security_t level, |
| enum bt_security_err err) |
| { |
| int eatt_err; |
| |
| if (err || level < BT_SECURITY_L2 || !bt_att_fixed_chan_only(conn)) { |
| return; |
| } |
| |
| eatt_err = att_schedule_eatt_connect(conn, CONFIG_BT_EATT_MAX); |
| if (eatt_err < 0) { |
| LOG_WRN("Automatic creation of EATT bearers failed on " |
| "connection %s with error %d", |
| bt_addr_le_str(bt_conn_get_dst(conn)), eatt_err); |
| } |
| } |
| |
| BT_CONN_CB_DEFINE(conn_callbacks) = { |
| .security_changed = eatt_auto_connect, |
| }; |
| |
| #endif /* CONFIG_BT_EATT_AUTO_CONNECT */ |
| |
| int bt_eatt_disconnect(struct bt_conn *conn) |
| { |
| struct bt_att_chan *chan; |
| struct bt_att *att; |
| int err = -ENOTCONN; |
| |
| if (!conn) { |
| return -EINVAL; |
| } |
| |
| chan = att_get_fixed_chan(conn); |
| att = chan->att; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| if (bt_att_is_enhanced(chan)) { |
| err = bt_l2cap_chan_disconnect(&chan->chan.chan); |
| } |
| } |
| |
| return err; |
| } |
| |
| #if defined(CONFIG_BT_TESTING) |
| int bt_eatt_disconnect_one(struct bt_conn *conn) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan; |
| |
| if (!conn) { |
| return -EINVAL; |
| } |
| |
| chan = att_get_fixed_chan(conn); |
| att = chan->att; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| if (bt_att_is_enhanced(chan)) { |
| return bt_l2cap_chan_disconnect(&chan->chan.chan); |
| } |
| } |
| |
| return -ENOTCONN; |
| } |
| |
| int bt_eatt_reconfigure(struct bt_conn *conn, uint16_t mtu) |
| { |
| struct bt_att_chan *att_chan = att_get_fixed_chan(conn); |
| struct bt_att *att = att_chan->att; |
| struct bt_l2cap_chan *chans[CONFIG_BT_EATT_MAX + 1] = {}; |
| size_t offset = 0; |
| size_t i = 0; |
| int err; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, att_chan, node) { |
| if (bt_att_is_enhanced(att_chan)) { |
| chans[i] = &att_chan->chan.chan; |
| i++; |
| } |
| } |
| |
| while (offset < i) { |
| /* bt_l2cap_ecred_chan_reconfigure() uses the first L2CAP_ECRED_CHAN_MAX_PER_REQ |
| * elements of the array or until a null-terminator is reached. |
| */ |
| err = bt_l2cap_ecred_chan_reconfigure(&chans[offset], mtu); |
| if (err < 0) { |
| return err; |
| } |
| |
| offset += L2CAP_ECRED_CHAN_MAX_PER_REQ; |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_TESTING */ |
| #endif /* CONFIG_BT_EATT */ |
| |
| static int bt_eatt_accept(struct bt_conn *conn, struct bt_l2cap_server *server, |
| struct bt_l2cap_chan **chan) |
| { |
| struct bt_att_chan *att_chan = att_get_fixed_chan(conn); |
| struct bt_att *att = att_chan->att; |
| |
| LOG_DBG("conn %p handle %u", conn, conn->handle); |
| |
| att_chan = att_chan_new(att, BIT(ATT_ENHANCED)); |
| if (att_chan) { |
| *chan = &att_chan->chan.chan; |
| return 0; |
| } |
| |
| return -ENOMEM; |
| } |
| |
| static void bt_eatt_init(void) |
| { |
| int err; |
| static struct bt_l2cap_server eatt_l2cap = { |
| .psm = BT_EATT_PSM, |
| .sec_level = BT_SECURITY_L2, |
| .accept = bt_eatt_accept, |
| }; |
| struct bt_l2cap_server *registered_server; |
| |
| LOG_DBG(""); |
| |
| /* Check if eatt_l2cap server has already been registered. */ |
| registered_server = bt_l2cap_server_lookup_psm(eatt_l2cap.psm); |
| if (registered_server != &eatt_l2cap) { |
| err = bt_l2cap_server_register(&eatt_l2cap); |
| if (err < 0) { |
| LOG_ERR("EATT Server registration failed %d", err); |
| } |
| } |
| |
| #if defined(CONFIG_BT_EATT) |
| static const struct bt_l2cap_ecred_cb cb = { |
| .ecred_conn_rsp = ecred_connect_rsp_cb, |
| .ecred_conn_req = ecred_connect_req_cb, |
| }; |
| |
| bt_l2cap_register_ecred_cb(&cb); |
| #endif /* CONFIG_BT_EATT */ |
| } |
| |
| void bt_att_init(void) |
| { |
| bt_gatt_init(); |
| |
| if (IS_ENABLED(CONFIG_BT_EATT)) { |
| bt_eatt_init(); |
| } |
| } |
| |
| uint16_t bt_att_get_mtu(struct bt_conn *conn) |
| { |
| struct bt_att_chan *chan, *tmp; |
| struct bt_att *att; |
| uint16_t mtu = 0; |
| |
| att = att_get(conn); |
| if (!att) { |
| return 0; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| if (bt_att_mtu(chan) > mtu) { |
| mtu = bt_att_mtu(chan); |
| } |
| } |
| |
| return mtu; |
| } |
| |
| uint16_t bt_att_get_uatt_mtu(struct bt_conn *conn) |
| { |
| struct bt_att_chan *chan, *tmp; |
| struct bt_att *att; |
| |
| att = att_get(conn); |
| if (!att) { |
| return 0; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| if (!bt_att_is_enhanced(chan)) { |
| return bt_att_mtu(chan); |
| } |
| } |
| |
| LOG_WRN("No UATT channel found in %p", conn); |
| |
| return 0; |
| } |
| |
| static void att_chan_mtu_updated(struct bt_att_chan *updated_chan) |
| { |
| struct bt_att *att = updated_chan->att; |
| struct bt_att_chan *chan, *tmp; |
| uint16_t max_tx = 0, max_rx = 0; |
| |
| /* Get maximum MTU's of other channels */ |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| if (chan == updated_chan) { |
| continue; |
| } |
| max_tx = MAX(max_tx, chan->chan.tx.mtu); |
| max_rx = MAX(max_rx, chan->chan.rx.mtu); |
| } |
| |
| /* If either maximum MTU has changed */ |
| if ((updated_chan->chan.tx.mtu > max_tx) || |
| (updated_chan->chan.rx.mtu > max_rx)) { |
| max_tx = MAX(max_tx, updated_chan->chan.tx.mtu); |
| max_rx = MAX(max_rx, updated_chan->chan.rx.mtu); |
| bt_gatt_att_max_mtu_changed(att->conn, max_tx, max_rx); |
| } |
| } |
| |
| struct bt_att_req *bt_att_req_alloc(k_timeout_t timeout) |
| { |
| struct bt_att_req *req = NULL; |
| |
| if (k_current_get() == att_handle_rsp_thread) { |
| /* No req will be fulfilled while blocking on the bt_recv thread. |
| * Blocking would cause deadlock. |
| */ |
| LOG_DBG("Timeout discarded. No blocking on bt_recv thread."); |
| timeout = K_NO_WAIT; |
| } |
| |
| /* Reserve space for request */ |
| if (k_mem_slab_alloc(&req_slab, (void **)&req, timeout)) { |
| LOG_DBG("No space for req"); |
| return NULL; |
| } |
| |
| LOG_DBG("req %p", req); |
| |
| memset(req, 0, sizeof(*req)); |
| |
| return req; |
| } |
| |
| void bt_att_req_free(struct bt_att_req *req) |
| { |
| LOG_DBG("req %p", req); |
| |
| if (req->buf) { |
| net_buf_unref(req->buf); |
| req->buf = NULL; |
| } |
| |
| k_mem_slab_free(&req_slab, (void *)req); |
| } |
| |
| int bt_att_send(struct bt_conn *conn, struct net_buf *buf) |
| { |
| struct bt_att *att; |
| |
| __ASSERT_NO_MSG(conn); |
| __ASSERT_NO_MSG(buf); |
| |
| att = att_get(conn); |
| if (!att) { |
| net_buf_unref(buf); |
| return -ENOTCONN; |
| } |
| |
| k_fifo_put(&att->tx_queue, buf); |
| att_send_process(att); |
| |
| return 0; |
| } |
| |
| int bt_att_req_send(struct bt_conn *conn, struct bt_att_req *req) |
| { |
| struct bt_att *att; |
| |
| LOG_DBG("conn %p req %p", conn, req); |
| |
| __ASSERT_NO_MSG(conn); |
| __ASSERT_NO_MSG(req); |
| |
| k_sched_lock(); |
| |
| att = att_get(conn); |
| if (!att) { |
| k_sched_unlock(); |
| return -ENOTCONN; |
| } |
| |
| sys_slist_append(&att->reqs, &req->node); |
| att_req_send_process(att); |
| |
| k_sched_unlock(); |
| |
| return 0; |
| } |
| |
| static bool bt_att_chan_req_cancel(struct bt_att_chan *chan, |
| struct bt_att_req *req) |
| { |
| if (chan->req != req) { |
| return false; |
| } |
| |
| chan->req = &cancel; |
| |
| bt_att_req_free(req); |
| |
| return true; |
| } |
| |
| void bt_att_req_cancel(struct bt_conn *conn, struct bt_att_req *req) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan, *tmp; |
| |
| LOG_DBG("req %p", req); |
| |
| if (!conn || !req) { |
| return; |
| } |
| |
| att = att_get(conn); |
| if (!att) { |
| return; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&att->chans, chan, tmp, node) { |
| /* Check if request is outstanding */ |
| if (bt_att_chan_req_cancel(chan, req)) { |
| return; |
| } |
| } |
| |
| /* Remove request from the list */ |
| sys_slist_find_and_remove(&att->reqs, &req->node); |
| |
| bt_att_req_free(req); |
| } |
| |
| struct bt_att_req *bt_att_find_req_by_user_data(struct bt_conn *conn, const void *user_data) |
| { |
| struct bt_att *att; |
| struct bt_att_chan *chan; |
| struct bt_att_req *req; |
| |
| att = att_get(conn); |
| if (!att) { |
| return NULL; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| if (chan->req->user_data == user_data) { |
| return chan->req; |
| } |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->reqs, req, node) { |
| if (req->user_data == user_data) { |
| return req; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| bool bt_att_fixed_chan_only(struct bt_conn *conn) |
| { |
| #if defined(CONFIG_BT_EATT) |
| return bt_eatt_count(conn) == 0; |
| #else |
| return true; |
| #endif /* CONFIG_BT_EATT */ |
| } |
| |
| void bt_att_clear_out_of_sync_sent(struct bt_conn *conn) |
| { |
| struct bt_att *att = att_get(conn); |
| struct bt_att_chan *chan; |
| |
| if (!att) { |
| return; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&att->chans, chan, node) { |
| atomic_clear_bit(chan->flags, ATT_OUT_OF_SYNC_SENT); |
| } |
| } |
| |
| bool bt_att_out_of_sync_sent_on_fixed(struct bt_conn *conn) |
| { |
| struct bt_l2cap_chan *l2cap_chan; |
| struct bt_att_chan *att_chan; |
| |
| l2cap_chan = bt_l2cap_le_lookup_rx_cid(conn, BT_L2CAP_CID_ATT); |
| if (!l2cap_chan) { |
| return false; |
| } |
| |
| att_chan = ATT_CHAN(l2cap_chan); |
| return atomic_test_bit(att_chan->flags, ATT_OUT_OF_SYNC_SENT); |
| } |
| |
| void bt_att_set_tx_meta_data(struct net_buf *buf, bt_gatt_complete_func_t func, void *user_data, |
| enum bt_att_chan_opt chan_opt) |
| { |
| struct bt_att_tx_meta_data *data = bt_att_get_tx_meta_data(buf); |
| |
| data->func = func; |
| data->user_data = user_data; |
| data->attr_count = 1; |
| data->chan_opt = chan_opt; |
| } |
| |
| void bt_att_increment_tx_meta_data_attr_count(struct net_buf *buf, uint16_t attr_count) |
| { |
| struct bt_att_tx_meta_data *data = bt_att_get_tx_meta_data(buf); |
| |
| data->attr_count += attr_count; |
| } |
| |
| bool bt_att_tx_meta_data_match(const struct net_buf *buf, bt_gatt_complete_func_t func, |
| const void *user_data, enum bt_att_chan_opt chan_opt) |
| { |
| const struct bt_att_tx_meta_data *meta = bt_att_get_tx_meta_data(buf); |
| |
| return ((meta->func == func) && |
| (meta->user_data == user_data) && |
| (meta->chan_opt == chan_opt)); |
| } |
| |
| bool bt_att_chan_opt_valid(struct bt_conn *conn, enum bt_att_chan_opt chan_opt) |
| { |
| if ((chan_opt & (BT_ATT_CHAN_OPT_ENHANCED_ONLY | BT_ATT_CHAN_OPT_UNENHANCED_ONLY)) == |
| (BT_ATT_CHAN_OPT_ENHANCED_ONLY | BT_ATT_CHAN_OPT_UNENHANCED_ONLY)) { |
| /* Enhanced and Unenhanced are mutually exclusive */ |
| return false; |
| } |
| |
| /* Choosing EATT requires EATT channels connected and encryption enabled */ |
| if (chan_opt & BT_ATT_CHAN_OPT_ENHANCED_ONLY) { |
| return (bt_conn_get_security(conn) > BT_SECURITY_L1) && |
| !bt_att_fixed_chan_only(conn); |
| } |
| |
| return true; |
| } |
| |
| int bt_gatt_authorization_cb_register(const struct bt_gatt_authorization_cb *cb) |
| { |
| if (!IS_ENABLED(CONFIG_BT_GATT_AUTHORIZATION_CUSTOM)) { |
| return -ENOSYS; |
| } |
| |
| if (!cb) { |
| authorization_cb = NULL; |
| return 0; |
| } |
| |
| if (authorization_cb) { |
| return -EALREADY; |
| } |
| |
| authorization_cb = cb; |
| |
| return 0; |
| } |