| /* |
| * Copyright (c) 2017 Intel Corporation |
| * Copyright (c) 2020 Lingao Meng |
| * Copyright (c) 2021 Manulytica Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <errno.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| |
| #include <zephyr/net/buf.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/bluetooth/mesh.h> |
| #include <zephyr/bluetooth/uuid.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_PROVISIONER) |
| #define LOG_MODULE_NAME bt_mesh_provisioner |
| #include "common/log.h" |
| |
| #include "host/ecc.h" |
| #include "host/testing.h" |
| |
| #include "crypto.h" |
| #include "adv.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "rpl.h" |
| #include "beacon.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "proxy.h" |
| #include "prov.h" |
| #include "settings.h" |
| |
| static struct { |
| struct bt_mesh_cdb_node *node; |
| uint16_t addr; |
| uint16_t net_idx; |
| uint8_t attention_duration; |
| uint8_t uuid[16]; |
| } prov_device; |
| |
| static void send_pub_key(void); |
| static void prov_dh_key_gen(void); |
| static void pub_key_ready(const uint8_t *pkey); |
| |
| static int reset_state(void) |
| { |
| if (prov_device.node != NULL) { |
| bt_mesh_cdb_node_del(prov_device.node, false); |
| } |
| |
| return bt_mesh_prov_reset_state(pub_key_ready); |
| } |
| |
| static void prov_link_close(enum prov_bearer_link_status status) |
| { |
| BT_DBG("%u", status); |
| bt_mesh_prov_link.expect = PROV_NO_PDU; |
| |
| bt_mesh_prov_link.bearer->link_close(status); |
| } |
| |
| static void prov_fail(uint8_t reason) |
| { |
| /* According to Bluetooth Mesh Specification v1.0.1, Section 5.4.4, the |
| * provisioner just closes the link when something fails, while the |
| * provisionee sends the fail message, and waits for the provisioner to |
| * close the link. |
| */ |
| prov_link_close(PROV_BEARER_LINK_STATUS_FAIL); |
| } |
| |
| static void send_invite(void) |
| { |
| PROV_BUF(inv, PDU_LEN_INVITE); |
| |
| BT_DBG(""); |
| |
| bt_mesh_prov_buf_init(&inv, PROV_INVITE); |
| net_buf_simple_add_u8(&inv, prov_device.attention_duration); |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.invite, &prov_device.attention_duration, |
| PDU_LEN_INVITE); |
| |
| if (bt_mesh_prov_send(&inv, NULL)) { |
| BT_ERR("Failed to send invite"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_CAPABILITIES; |
| } |
| |
| static void start_sent(int err, void *cb_data) |
| { |
| if (!bt_pub_key_get()) { |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_PUB_KEY); |
| BT_WARN("Waiting for local public key"); |
| } else { |
| send_pub_key(); |
| } |
| } |
| |
| static void send_start(void) |
| { |
| BT_DBG(""); |
| |
| PROV_BUF(start, PDU_LEN_START); |
| |
| bool oob_pub_key = bt_mesh_prov_link.conf_inputs.capabilities[3] == PUB_KEY_OOB; |
| |
| bt_mesh_prov_buf_init(&start, PROV_START); |
| net_buf_simple_add_u8(&start, PROV_ALG_P256); |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, REMOTE_PUB_KEY) && oob_pub_key) { |
| net_buf_simple_add_u8(&start, PUB_KEY_OOB); |
| atomic_set_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY); |
| } else { |
| net_buf_simple_add_u8(&start, PUB_KEY_NO_OOB); |
| } |
| |
| net_buf_simple_add_u8(&start, bt_mesh_prov_link.oob_method); |
| |
| net_buf_simple_add_u8(&start, bt_mesh_prov_link.oob_action); |
| |
| net_buf_simple_add_u8(&start, bt_mesh_prov_link.oob_size); |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.start, &start.data[1], PDU_LEN_START); |
| |
| if (bt_mesh_prov_auth(true, bt_mesh_prov_link.oob_method, |
| bt_mesh_prov_link.oob_action, bt_mesh_prov_link.oob_size) < 0) { |
| BT_ERR("Invalid authentication method: 0x%02x; " |
| "action: 0x%02x; size: 0x%02x", bt_mesh_prov_link.oob_method, |
| bt_mesh_prov_link.oob_action, bt_mesh_prov_link.oob_size); |
| return; |
| } |
| |
| if (bt_mesh_prov_send(&start, start_sent)) { |
| BT_ERR("Failed to send Provisioning Start"); |
| return; |
| } |
| } |
| |
| static bool prov_check_method(struct bt_mesh_dev_capabilities *caps) |
| { |
| if (bt_mesh_prov_link.oob_method == AUTH_METHOD_STATIC) { |
| if (!caps->static_oob) { |
| BT_WARN("Device not support OOB static authentication provisioning"); |
| return false; |
| } |
| } else if (bt_mesh_prov_link.oob_method == AUTH_METHOD_INPUT) { |
| if (bt_mesh_prov_link.oob_size > caps->input_size) { |
| BT_WARN("The required input length (0x%02x) " |
| "exceeds the device capacity (0x%02x)", |
| bt_mesh_prov_link.oob_size, caps->input_size); |
| return false; |
| } |
| |
| if (!(BIT(bt_mesh_prov_link.oob_action) & caps->input_actions)) { |
| BT_WARN("The required input action (0x%04x) " |
| "not supported by the device (0x%02x)", |
| (uint16_t)BIT(bt_mesh_prov_link.oob_action), caps->input_actions); |
| return false; |
| } |
| |
| if (bt_mesh_prov_link.oob_action == INPUT_OOB_STRING) { |
| if (!bt_mesh_prov->output_string) { |
| BT_WARN("Not support output string"); |
| return false; |
| } |
| } else { |
| if (!bt_mesh_prov->output_number) { |
| BT_WARN("Not support output number"); |
| return false; |
| } |
| } |
| } else if (bt_mesh_prov_link.oob_method == AUTH_METHOD_OUTPUT) { |
| if (bt_mesh_prov_link.oob_size > caps->output_size) { |
| BT_WARN("The required output length (0x%02x) " |
| "exceeds the device capacity (0x%02x)", |
| bt_mesh_prov_link.oob_size, caps->output_size); |
| return false; |
| } |
| |
| if (!(BIT(bt_mesh_prov_link.oob_action) & caps->output_actions)) { |
| BT_WARN("The required output action (0x%04x) " |
| "not supported by the device (0x%02x)", |
| (uint16_t)BIT(bt_mesh_prov_link.oob_action), caps->output_actions); |
| return false; |
| } |
| |
| if (!bt_mesh_prov->input) { |
| BT_WARN("Not support input"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static void prov_capabilities(const uint8_t *data) |
| { |
| struct bt_mesh_dev_capabilities caps; |
| |
| caps.elem_count = data[0]; |
| BT_DBG("Elements: %u", caps.elem_count); |
| |
| caps.algorithms = sys_get_be16(&data[1]); |
| BT_DBG("Algorithms: %u", caps.algorithms); |
| |
| caps.pub_key_type = data[3]; |
| caps.static_oob = data[4]; |
| caps.output_size = data[5]; |
| BT_DBG("Public Key Type: 0x%02x", caps.pub_key_type); |
| BT_DBG("Static OOB Type: 0x%02x", caps.static_oob); |
| BT_DBG("Output OOB Size: %u", caps.output_size); |
| |
| caps.output_actions = (bt_mesh_output_action_t) |
| (sys_get_be16(&data[6])); |
| caps.input_size = data[8]; |
| caps.input_actions = (bt_mesh_input_action_t) |
| (sys_get_be16(&data[9])); |
| BT_DBG("Output OOB Action: 0x%04x", caps.output_actions); |
| BT_DBG("Input OOB Size: %u", caps.input_size); |
| BT_DBG("Input OOB Action: 0x%04x", caps.input_actions); |
| |
| if (data[0] == 0) { |
| BT_ERR("Invalid number of elements"); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| prov_device.node = |
| bt_mesh_cdb_node_alloc(prov_device.uuid, |
| prov_device.addr, data[0], |
| prov_device.net_idx); |
| if (prov_device.node == NULL) { |
| BT_ERR("Failed allocating node 0x%04x", prov_device.addr); |
| prov_fail(PROV_ERR_RESOURCES); |
| return; |
| } |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.capabilities, data, PDU_LEN_CAPABILITIES); |
| |
| if (bt_mesh_prov->capabilities) { |
| bt_mesh_prov->capabilities(&caps); |
| } |
| |
| if (!prov_check_method(&caps)) { |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| send_start(); |
| } |
| |
| static void send_confirm(void) |
| { |
| PROV_BUF(cfm, PDU_LEN_CONFIRM); |
| uint8_t *inputs = (uint8_t *)&bt_mesh_prov_link.conf_inputs; |
| |
| BT_DBG("ConfInputs[0] %s", bt_hex(inputs, 64)); |
| BT_DBG("ConfInputs[64] %s", bt_hex(&inputs[64], 64)); |
| BT_DBG("ConfInputs[128] %s", bt_hex(&inputs[128], 17)); |
| |
| if (bt_mesh_prov_conf_salt(inputs, bt_mesh_prov_link.conf_salt)) { |
| BT_ERR("Unable to generate confirmation salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ConfirmationSalt: %s", bt_hex(bt_mesh_prov_link.conf_salt, 16)); |
| |
| if (bt_mesh_prov_conf_key(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.conf_salt, bt_mesh_prov_link.conf_key)) { |
| BT_ERR("Unable to generate confirmation key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ConfirmationKey: %s", bt_hex(bt_mesh_prov_link.conf_key, 16)); |
| |
| if (bt_rand(bt_mesh_prov_link.rand, 16)) { |
| BT_ERR("Unable to generate random number"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("LocalRandom: %s", bt_hex(bt_mesh_prov_link.rand, 16)); |
| |
| bt_mesh_prov_buf_init(&cfm, PROV_CONFIRM); |
| |
| if (bt_mesh_prov_conf(bt_mesh_prov_link.conf_key, |
| bt_mesh_prov_link.rand, bt_mesh_prov_link.auth, |
| bt_mesh_prov_link.conf)) { |
| BT_ERR("Unable to generate confirmation value"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| net_buf_simple_add_mem(&cfm, bt_mesh_prov_link.conf, 16); |
| |
| if (bt_mesh_prov_send(&cfm, NULL)) { |
| BT_ERR("Failed to send Provisioning Confirm"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_CONFIRM; |
| } |
| |
| static void public_key_sent(int err, void *cb_data) |
| { |
| atomic_set_bit(bt_mesh_prov_link.flags, PUB_KEY_SENT); |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY) && |
| atomic_test_bit(bt_mesh_prov_link.flags, REMOTE_PUB_KEY)) { |
| prov_dh_key_gen(); |
| return; |
| } |
| } |
| |
| static void send_pub_key(void) |
| { |
| PROV_BUF(buf, PDU_LEN_PUB_KEY); |
| const uint8_t *key; |
| |
| key = bt_pub_key_get(); |
| if (!key) { |
| BT_ERR("No public key available"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| bt_mesh_prov_buf_init(&buf, PROV_PUB_KEY); |
| |
| /* Swap X and Y halves independently to big-endian */ |
| sys_memcpy_swap(net_buf_simple_add(&buf, BT_PUB_KEY_COORD_LEN), key, BT_PUB_KEY_COORD_LEN); |
| sys_memcpy_swap(net_buf_simple_add(&buf, BT_PUB_KEY_COORD_LEN), &key[BT_PUB_KEY_COORD_LEN], |
| BT_PUB_KEY_COORD_LEN); |
| |
| BT_DBG("Local Public Key: %s", bt_hex(buf.data + 1, BT_PUB_KEY_LEN)); |
| |
| /* PublicKeyProvisioner */ |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_provisioner, &buf.data[1], PDU_LEN_PUB_KEY); |
| |
| if (bt_mesh_prov_send(&buf, public_key_sent)) { |
| BT_ERR("Failed to send Public Key"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_PUB_KEY; |
| } |
| |
| static void prov_dh_key_cb(const uint8_t dhkey[BT_DH_KEY_LEN]) |
| { |
| BT_DBG("%p", dhkey); |
| |
| if (!dhkey) { |
| BT_ERR("DHKey generation failed"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| sys_memcpy_swap(bt_mesh_prov_link.dhkey, dhkey, BT_DH_KEY_LEN); |
| |
| BT_DBG("DHkey: %s", bt_hex(bt_mesh_prov_link.dhkey, BT_DH_KEY_LEN)); |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, WAIT_STRING) || |
| atomic_test_bit(bt_mesh_prov_link.flags, WAIT_NUMBER) || |
| atomic_test_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE)) { |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_CONFIRM); |
| return; |
| } |
| |
| send_confirm(); |
| } |
| |
| static void prov_dh_key_gen(void) |
| { |
| uint8_t remote_pk_le[BT_PUB_KEY_LEN]; |
| const uint8_t *remote_pk; |
| const uint8_t *local_pk; |
| |
| local_pk = bt_mesh_prov_link.conf_inputs.pub_key_provisioner; |
| remote_pk = bt_mesh_prov_link.conf_inputs.pub_key_device; |
| |
| /* Copy remote key in little-endian for bt_dh_key_gen(). |
| * X and Y halves are swapped independently. The bt_dh_key_gen() |
| * will also take care of validating the remote public key. |
| */ |
| sys_memcpy_swap(remote_pk_le, remote_pk, BT_PUB_KEY_COORD_LEN); |
| sys_memcpy_swap(&remote_pk_le[BT_PUB_KEY_COORD_LEN], &remote_pk[BT_PUB_KEY_COORD_LEN], |
| BT_PUB_KEY_COORD_LEN); |
| |
| if (!memcmp(local_pk, remote_pk, BT_PUB_KEY_LEN)) { |
| BT_ERR("Public keys are identical"); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| if (bt_dh_key_gen(remote_pk_le, prov_dh_key_cb)) { |
| BT_ERR("Failed to generate DHKey"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| } |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE)) { |
| bt_mesh_prov_link.expect = PROV_INPUT_COMPLETE; |
| } |
| } |
| |
| static void prov_pub_key(const uint8_t *data) |
| { |
| BT_DBG("Remote Public Key: %s", bt_hex(data, BT_PUB_KEY_LEN)); |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, REMOTE_PUB_KEY); |
| |
| /* PublicKeyDevice */ |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, data, BT_PUB_KEY_LEN); |
| bt_mesh_prov_link.bearer->clear_tx(); |
| |
| prov_dh_key_gen(); |
| } |
| |
| static void pub_key_ready(const uint8_t *pkey) |
| { |
| if (!pkey) { |
| BT_WARN("Public key not available"); |
| return; |
| } |
| |
| BT_DBG("Local public key ready"); |
| |
| if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, WAIT_PUB_KEY)) { |
| send_pub_key(); |
| } |
| } |
| |
| static void notify_input_complete(void) |
| { |
| if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, |
| NOTIFY_INPUT_COMPLETE) && |
| bt_mesh_prov->input_complete) { |
| bt_mesh_prov->input_complete(); |
| } |
| } |
| |
| static void prov_input_complete(const uint8_t *data) |
| { |
| BT_DBG(""); |
| |
| notify_input_complete(); |
| |
| if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, WAIT_CONFIRM)) { |
| send_confirm(); |
| } |
| } |
| |
| static void send_prov_data(void) |
| { |
| PROV_BUF(pdu, PDU_LEN_DATA); |
| struct bt_mesh_cdb_subnet *sub; |
| uint8_t session_key[16]; |
| uint8_t nonce[13]; |
| int err; |
| |
| err = bt_mesh_session_key(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, session_key); |
| if (err) { |
| BT_ERR("Unable to generate session key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("SessionKey: %s", bt_hex(session_key, 16)); |
| |
| err = bt_mesh_prov_nonce(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, nonce); |
| if (err) { |
| BT_ERR("Unable to generate session nonce"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("Nonce: %s", bt_hex(nonce, 13)); |
| |
| err = bt_mesh_dev_key(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, prov_device.node->dev_key); |
| if (err) { |
| BT_ERR("Unable to generate device key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("DevKey: %s", bt_hex(prov_device.node->dev_key, 16)); |
| |
| sub = bt_mesh_cdb_subnet_get(prov_device.node->net_idx); |
| if (sub == NULL) { |
| BT_ERR("No subnet with net_idx %u", |
| prov_device.node->net_idx); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| bt_mesh_prov_buf_init(&pdu, PROV_DATA); |
| net_buf_simple_add_mem(&pdu, sub->keys[SUBNET_KEY_TX_IDX(sub)].net_key, 16); |
| net_buf_simple_add_be16(&pdu, prov_device.node->net_idx); |
| net_buf_simple_add_u8(&pdu, bt_mesh_cdb_subnet_flags(sub)); |
| net_buf_simple_add_be32(&pdu, bt_mesh_cdb.iv_index); |
| net_buf_simple_add_be16(&pdu, prov_device.node->addr); |
| net_buf_simple_add(&pdu, 8); /* For MIC */ |
| |
| BT_DBG("net_idx %u, iv_index 0x%08x, addr 0x%04x", |
| prov_device.node->net_idx, bt_mesh.iv_index, |
| prov_device.node->addr); |
| |
| err = bt_mesh_prov_encrypt(session_key, nonce, &pdu.data[1], |
| &pdu.data[1]); |
| if (err) { |
| BT_ERR("Unable to encrypt provisioning data"); |
| prov_fail(PROV_ERR_DECRYPT); |
| return; |
| } |
| |
| if (bt_mesh_prov_send(&pdu, NULL)) { |
| BT_ERR("Failed to send Provisioning Data"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_COMPLETE; |
| } |
| |
| static void prov_complete(const uint8_t *data) |
| { |
| struct bt_mesh_cdb_node *node = prov_device.node; |
| |
| BT_DBG("key %s, net_idx %u, num_elem %u, addr 0x%04x", |
| bt_hex(node->dev_key, 16), node->net_idx, node->num_elem, |
| node->addr); |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| bt_mesh_cdb_node_store(node); |
| } |
| |
| prov_device.node = NULL; |
| prov_link_close(PROV_BEARER_LINK_STATUS_SUCCESS); |
| |
| if (bt_mesh_prov->node_added) { |
| bt_mesh_prov->node_added(node->net_idx, node->uuid, node->addr, |
| node->num_elem); |
| } |
| } |
| |
| static void send_random(void) |
| { |
| PROV_BUF(rnd, PDU_LEN_RANDOM); |
| |
| bt_mesh_prov_buf_init(&rnd, PROV_RANDOM); |
| net_buf_simple_add_mem(&rnd, bt_mesh_prov_link.rand, 16); |
| |
| if (bt_mesh_prov_send(&rnd, NULL)) { |
| BT_ERR("Failed to send Provisioning Random"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_RANDOM; |
| } |
| |
| static void prov_random(const uint8_t *data) |
| { |
| uint8_t conf_verify[16]; |
| |
| BT_DBG("Remote Random: %s", bt_hex(data, 16)); |
| if (!memcmp(data, bt_mesh_prov_link.rand, 16)) { |
| BT_ERR("Random value is identical to ours, rejecting."); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| if (bt_mesh_prov_conf(bt_mesh_prov_link.conf_key, |
| data, bt_mesh_prov_link.auth, conf_verify)) { |
| BT_ERR("Unable to calculate confirmation verification"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (memcmp(conf_verify, bt_mesh_prov_link.conf, 16)) { |
| BT_ERR("Invalid confirmation value"); |
| BT_DBG("Received: %s", bt_hex(bt_mesh_prov_link.conf, 16)); |
| BT_DBG("Calculated: %s", bt_hex(conf_verify, 16)); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| if (bt_mesh_prov_salt(bt_mesh_prov_link.conf_salt, |
| bt_mesh_prov_link.rand, data, bt_mesh_prov_link.prov_salt)) { |
| BT_ERR("Failed to generate provisioning salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ProvisioningSalt: %s", bt_hex(bt_mesh_prov_link.prov_salt, 16)); |
| |
| send_prov_data(); |
| } |
| |
| static void prov_confirm(const uint8_t *data) |
| { |
| BT_DBG("Remote Confirm: %s", bt_hex(data, 16)); |
| |
| if (!memcmp(data, bt_mesh_prov_link.conf, 16)) { |
| BT_ERR("Confirm value is identical to ours, rejecting."); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| memcpy(bt_mesh_prov_link.conf, data, 16); |
| |
| send_random(); |
| } |
| |
| static void prov_failed(const uint8_t *data) |
| { |
| BT_WARN("Error: 0x%02x", data[0]); |
| reset_state(); |
| } |
| |
| static void local_input_complete(void) |
| { |
| if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, WAIT_CONFIRM)) { |
| send_confirm(); |
| } |
| } |
| |
| static void prov_link_closed(void) |
| { |
| reset_state(); |
| } |
| |
| static void prov_link_opened(void) |
| { |
| send_invite(); |
| } |
| |
| static const struct bt_mesh_prov_role role_provisioner = { |
| .input_complete = local_input_complete, |
| .link_opened = prov_link_opened, |
| .link_closed = prov_link_closed, |
| .error = prov_fail, |
| .op = { |
| [PROV_CAPABILITIES] = prov_capabilities, |
| [PROV_PUB_KEY] = prov_pub_key, |
| [PROV_INPUT_COMPLETE] = prov_input_complete, |
| [PROV_CONFIRM] = prov_confirm, |
| [PROV_RANDOM] = prov_random, |
| [PROV_COMPLETE] = prov_complete, |
| [PROV_FAILED] = prov_failed, |
| }, |
| }; |
| |
| static void prov_set_method(uint8_t method, uint8_t action, uint8_t size) |
| { |
| bt_mesh_prov_link.oob_method = method; |
| bt_mesh_prov_link.oob_action = action; |
| bt_mesh_prov_link.oob_size = size; |
| } |
| |
| int bt_mesh_auth_method_set_input(bt_mesh_input_action_t action, uint8_t size) |
| { |
| if (!action || !size || size > PROV_IO_OOB_SIZE_MAX) { |
| return -EINVAL; |
| } |
| |
| prov_set_method(AUTH_METHOD_INPUT, find_msb_set(action) - 1, size); |
| return 0; |
| } |
| |
| int bt_mesh_auth_method_set_output(bt_mesh_output_action_t action, uint8_t size) |
| { |
| if (!action || !size || size > PROV_IO_OOB_SIZE_MAX) { |
| return -EINVAL; |
| } |
| |
| prov_set_method(AUTH_METHOD_OUTPUT, find_msb_set(action) - 1, size); |
| return 0; |
| } |
| |
| int bt_mesh_auth_method_set_static(const uint8_t *static_val, uint8_t size) |
| { |
| if (!size || !static_val || size > 16) { |
| return -EINVAL; |
| } |
| |
| prov_set_method(AUTH_METHOD_STATIC, 0, 0); |
| |
| memcpy(bt_mesh_prov_link.auth + 16 - size, static_val, size); |
| if (size < 16) { |
| (void)memset(bt_mesh_prov_link.auth, 0, |
| sizeof(bt_mesh_prov_link.auth) - size); |
| } |
| return 0; |
| } |
| |
| int bt_mesh_auth_method_set_none(void) |
| { |
| prov_set_method(AUTH_METHOD_NO_OOB, 0, 0); |
| return 0; |
| } |
| |
| int bt_mesh_prov_remote_pub_key_set(const uint8_t public_key[BT_PUB_KEY_LEN]) |
| { |
| if (public_key == NULL) { |
| return -EINVAL; |
| } |
| |
| if (atomic_test_and_set_bit(bt_mesh_prov_link.flags, REMOTE_PUB_KEY)) { |
| return -EALREADY; |
| } |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, public_key, PDU_LEN_PUB_KEY); |
| |
| return 0; |
| } |
| |
| static int bt_mesh_provisioner_open(const struct prov_bearer *bearer, |
| const uint8_t uuid[16], |
| uint16_t net_idx, uint16_t addr, |
| uint8_t attention_duration) |
| { |
| int err; |
| |
| if (atomic_test_and_set_bit(bt_mesh_prov_link.flags, LINK_ACTIVE)) { |
| return -EBUSY; |
| } |
| |
| struct bt_uuid_128 uuid_repr = { .uuid = { BT_UUID_TYPE_128 } }; |
| |
| memcpy(uuid_repr.val, uuid, 16); |
| BT_DBG("Provisioning %s", bt_uuid_str(&uuid_repr.uuid)); |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, PROVISIONER); |
| memcpy(prov_device.uuid, uuid, 16); |
| prov_device.addr = addr; |
| prov_device.net_idx = net_idx; |
| prov_device.attention_duration = attention_duration; |
| bt_mesh_prov_link.bearer = bearer; |
| bt_mesh_prov_link.role = &role_provisioner; |
| |
| err = bt_mesh_prov_link.bearer->link_open(prov_device.uuid, PROTOCOL_TIMEOUT, |
| bt_mesh_prov_bearer_cb_get(), NULL); |
| if (err) { |
| atomic_clear_bit(bt_mesh_prov_link.flags, LINK_ACTIVE); |
| } |
| |
| return err; |
| } |
| |
| #if defined(CONFIG_BT_MESH_PB_ADV) |
| int bt_mesh_pb_adv_open(const uint8_t uuid[16], uint16_t net_idx, uint16_t addr, |
| uint8_t attention_duration) |
| { |
| return bt_mesh_provisioner_open(&pb_adv, uuid, net_idx, addr, attention_duration); |
| } |
| #endif |
| |
| #if defined(CONFIG_BT_MESH_PB_GATT_CLIENT) |
| int bt_mesh_pb_gatt_open(const uint8_t uuid[16], uint16_t net_idx, uint16_t addr, |
| uint8_t attention_duration) |
| { |
| return bt_mesh_provisioner_open(&pb_gatt, uuid, net_idx, addr, attention_duration); |
| } |
| #endif |