| /* |
| * Copyright (c) 2018 Alexander Wachter |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <clock_control/stm32_clock_control.h> |
| #include <clock_control.h> |
| #include <misc/util.h> |
| #include <string.h> |
| #include <kernel.h> |
| #include <soc.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <can.h> |
| #include "stm32_can.h" |
| |
| #define LOG_LEVEL CONFIG_CAN_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(stm32_can); |
| |
| /* |
| * Translation tables |
| * filter_in_bank[enum can_filter_type] = number of filters in bank for this type |
| * reg_demand[enum can_filter_type] = how many registers are used for this type |
| */ |
| static const u8_t filter_in_bank[] = {2, 4, 1, 2}; |
| static const u8_t reg_demand[] = {2, 1, 4, 2}; |
| |
| static void can_stm32_signal_tx_complete(struct can_mailbox *mb) |
| { |
| if (mb->tx_callback) { |
| mb->tx_callback(mb->error_flags); |
| } else { |
| k_sem_give(&mb->tx_int_sem); |
| } |
| } |
| |
| static void can_stm32_get_msg_fifo(CAN_FIFOMailBox_TypeDef *mbox, |
| struct zcan_frame *msg) |
| { |
| if (mbox->RIR & CAN_RI0R_IDE) { |
| msg->ext_id = mbox->RIR >> CAN_RI0R_EXID_Pos; |
| msg->id_type = CAN_EXTENDED_IDENTIFIER; |
| } else { |
| msg->std_id = mbox->RIR >> CAN_RI0R_STID_Pos; |
| msg->id_type = CAN_STANDARD_IDENTIFIER; |
| } |
| |
| msg->rtr = mbox->RIR & CAN_RI0R_RTR ? CAN_REMOTEREQUEST : CAN_DATAFRAME; |
| msg->dlc = mbox->RDTR & (CAN_RDT0R_DLC >> CAN_RDT0R_DLC_Pos); |
| msg->data_32[0] = mbox->RDLR; |
| msg->data_32[1] = mbox->RDHR; |
| } |
| |
| static inline |
| void can_stm32_rx_isr_handler(CAN_TypeDef *can, struct can_stm32_data *data) |
| { |
| CAN_FIFOMailBox_TypeDef *mbox; |
| int filter_match_index; |
| struct zcan_frame msg; |
| |
| while (can->RF0R & CAN_RF0R_FMP0) { |
| mbox = &can->sFIFOMailBox[0]; |
| filter_match_index = ((mbox->RDTR & CAN_RDT0R_FMI) |
| >> CAN_RDT0R_FMI_Pos); |
| |
| if (filter_match_index >= CONFIG_CAN_MAX_FILTER) { |
| break; |
| } |
| |
| LOG_DBG("Message on filter index %d", filter_match_index); |
| can_stm32_get_msg_fifo(mbox, &msg); |
| |
| if (data->rx_response[filter_match_index]) { |
| if (data->response_type & (1ULL << filter_match_index)) { |
| struct k_msgq *msg_q = |
| data->rx_response[filter_match_index]; |
| |
| k_msgq_put(msg_q, &msg, K_NO_WAIT); |
| } else { |
| can_rx_callback_t callback = |
| data->rx_response[filter_match_index]; |
| callback(&msg); |
| } |
| } |
| |
| /* Release message */ |
| can->RF0R |= CAN_RF0R_RFOM0; |
| } |
| } |
| |
| static inline |
| void can_stm32_tx_isr_handler(CAN_TypeDef *can, struct can_stm32_data *data) |
| { |
| u32_t bus_off; |
| |
| bus_off = can->ESR & CAN_ESR_BOFF; |
| |
| if ((can->TSR & CAN_TSR_RQCP0) | bus_off) { |
| data->mb0.error_flags = |
| can->TSR & CAN_TSR_TXOK0 ? CAN_TX_OK : |
| can->TSR & CAN_TSR_TERR0 ? CAN_TX_ERR : |
| can->TSR & CAN_TSR_ALST0 ? CAN_TX_ARB_LOST : |
| bus_off ? CAN_TX_BUS_OFF : |
| CAN_TX_UNKNOWN; |
| /* clear the request. */ |
| can->TSR |= CAN_TSR_RQCP0; |
| can_stm32_signal_tx_complete(&data->mb0); |
| } |
| |
| if ((can->TSR & CAN_TSR_RQCP1) | bus_off) { |
| data->mb1.error_flags = |
| can->TSR & CAN_TSR_TXOK1 ? CAN_TX_OK : |
| can->TSR & CAN_TSR_TERR1 ? CAN_TX_ERR : |
| can->TSR & CAN_TSR_ALST1 ? CAN_TX_ARB_LOST : |
| bus_off ? CAN_TX_BUS_OFF : |
| CAN_TX_UNKNOWN; |
| /* clear the request. */ |
| can->TSR |= CAN_TSR_RQCP1; |
| can_stm32_signal_tx_complete(&data->mb1); |
| } |
| |
| if ((can->TSR & CAN_TSR_RQCP2) | bus_off) { |
| data->mb2.error_flags = |
| can->TSR & CAN_TSR_TXOK2 ? CAN_TX_OK : |
| can->TSR & CAN_TSR_TERR2 ? CAN_TX_ERR : |
| can->TSR & CAN_TSR_ALST2 ? CAN_TX_ARB_LOST : |
| bus_off ? CAN_TX_BUS_OFF : |
| CAN_TX_UNKNOWN; |
| /* clear the request. */ |
| can->TSR |= CAN_TSR_RQCP2; |
| can_stm32_signal_tx_complete(&data->mb2); |
| } |
| |
| if (can->TSR & CAN_TSR_TME) { |
| k_sem_give(&data->tx_int_sem); |
| } |
| } |
| |
| #ifdef CONFIG_SOC_SERIES_STM32F0X |
| |
| static void can_stm32_isr(void *arg) |
| { |
| struct device *dev; |
| struct can_stm32_data *data; |
| const struct can_stm32_config *cfg; |
| CAN_TypeDef *can; |
| |
| dev = (struct device *)arg; |
| data = DEV_DATA(dev); |
| cfg = DEV_CFG(dev); |
| can = cfg->can; |
| |
| can_stm32_tx_isr_handler(can, data); |
| can_stm32_rx_isr_handler(can, data); |
| |
| } |
| |
| #else |
| |
| static void can_stm32_rx_isr(void *arg) |
| { |
| struct device *dev; |
| struct can_stm32_data *data; |
| const struct can_stm32_config *cfg; |
| CAN_TypeDef *can; |
| |
| dev = (struct device *)arg; |
| data = DEV_DATA(dev); |
| cfg = DEV_CFG(dev); |
| can = cfg->can; |
| |
| can_stm32_rx_isr_handler(can, data); |
| } |
| |
| static void can_stm32_tx_isr(void *arg) |
| { |
| struct device *dev; |
| struct can_stm32_data *data; |
| const struct can_stm32_config *cfg; |
| CAN_TypeDef *can; |
| |
| dev = (struct device *)arg; |
| data = DEV_DATA(dev); |
| cfg = DEV_CFG(dev); |
| can = cfg->can; |
| |
| can_stm32_tx_isr_handler(can, data); |
| } |
| |
| #endif |
| |
| void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan) |
| { |
| ARG_UNUSED(hcan); |
| } |
| |
| int can_stm32_runtime_configure(struct device *dev, enum can_mode mode, |
| u32_t bitrate) |
| { |
| CAN_HandleTypeDef hcan; |
| const struct can_stm32_config *cfg = DEV_CFG(dev); |
| CAN_TypeDef *can = cfg->can; |
| struct device *clock; |
| u32_t clock_rate; |
| u32_t prescaler; |
| u32_t hal_mode; |
| int hal_ret; |
| u32_t bs1; |
| u32_t bs2; |
| u32_t sjw; |
| int ret; |
| |
| clock = device_get_binding(STM32_CLOCK_CONTROL_NAME); |
| __ASSERT_NO_MSG(clock); |
| hcan.Instance = can; |
| ret = clock_control_get_rate(clock, (clock_control_subsys_t *) &cfg->pclken, |
| &clock_rate); |
| if (ret != 0) { |
| LOG_ERR("Failed call clock_control_get_rate: return [%d]", ret); |
| return -EIO; |
| } |
| |
| if (!bitrate) { |
| bitrate = cfg->bus_speed; |
| } |
| |
| prescaler = clock_rate / (BIT_SEG_LENGTH(cfg) * bitrate); |
| if (prescaler == 0U || prescaler > 1024) { |
| LOG_ERR("HAL_CAN_Init failed: prescaler > max (%d > 1024)", |
| prescaler); |
| return -EINVAL; |
| } |
| |
| if (clock_rate % (BIT_SEG_LENGTH(cfg) * bitrate)) { |
| LOG_ERR("Prescaler is not a natural number! " |
| "prescaler = clock_rate / ((PROP_SEG1 + SEG2 + 1)" |
| " * bus_speed); " |
| "prescaler = %d / ((%d + %d + 1) * %d)", |
| clock_rate, |
| cfg->prop_bs1, |
| cfg->bs2, |
| bitrate); |
| } |
| |
| __ASSERT(cfg->sjw <= 0x03, "SJW maximum is 3"); |
| __ASSERT(cfg->prop_bs1 <= 0x0F, "PROP_BS1 maximum is 15"); |
| __ASSERT(cfg->bs2 <= 0x07, "BS2 maximum is 7"); |
| |
| bs1 = ((cfg->prop_bs1 & 0x0F) - 1) << CAN_BTR_TS1_Pos; |
| bs2 = ((cfg->bs2 & 0x07) - 1) << CAN_BTR_TS2_Pos; |
| sjw = ((cfg->sjw & 0x07) - 1) << CAN_BTR_SJW_Pos; |
| |
| hal_mode = mode == CAN_NORMAL_MODE ? CAN_MODE_NORMAL : |
| mode == CAN_LOOPBACK_MODE ? CAN_MODE_LOOPBACK : |
| mode == CAN_SILENT_MODE ? CAN_MODE_SILENT : |
| CAN_MODE_SILENT_LOOPBACK; |
| |
| hcan.Init.TTCM = DISABLE; |
| hcan.Init.ABOM = DISABLE; |
| hcan.Init.AWUM = DISABLE; |
| hcan.Init.NART = DISABLE; |
| hcan.Init.RFLM = DISABLE; |
| hcan.Init.TXFP = DISABLE; |
| hcan.Init.Mode = hal_mode; |
| hcan.Init.SJW = sjw; |
| hcan.Init.BS1 = bs1; |
| hcan.Init.BS2 = bs2; |
| hcan.Init.Prescaler = prescaler; |
| |
| hcan.State = HAL_CAN_STATE_RESET; |
| |
| hal_ret = HAL_CAN_Init(&hcan); |
| if (hal_ret != HAL_OK) { |
| LOG_ERR("HAL_CAN_Init failed: %d", hal_ret); |
| return -EIO; |
| } |
| |
| LOG_DBG("Runtime configure of %s done", dev->config->name); |
| return 0; |
| } |
| |
| static int can_stm32_init(struct device *dev) |
| { |
| const struct can_stm32_config *cfg = DEV_CFG(dev); |
| struct can_stm32_data *data = DEV_DATA(dev); |
| CAN_TypeDef *can = cfg->can; |
| struct device *clock; |
| int ret; |
| |
| k_mutex_init(&data->tx_mutex); |
| k_mutex_init(&data->set_filter_mutex); |
| k_sem_init(&data->tx_int_sem, 0, 1); |
| k_sem_init(&data->mb0.tx_int_sem, 0, 1); |
| k_sem_init(&data->mb1.tx_int_sem, 0, 1); |
| k_sem_init(&data->mb2.tx_int_sem, 0, 1); |
| data->mb0.tx_callback = NULL; |
| data->mb1.tx_callback = NULL; |
| data->mb2.tx_callback = NULL; |
| |
| data->filter_usage = (1ULL << CAN_MAX_NUMBER_OF_FILTERS) - 1ULL; |
| (void)memset(data->rx_response, 0, |
| sizeof(void *) * CONFIG_CAN_MAX_FILTER); |
| data->response_type = 0U; |
| |
| clock = device_get_binding(STM32_CLOCK_CONTROL_NAME); |
| __ASSERT_NO_MSG(clock); |
| |
| ret = clock_control_on(clock, (clock_control_subsys_t *) &cfg->pclken); |
| if (ret != 0) { |
| LOG_ERR("HAL_CAN_Init clock control on failed: %d", ret); |
| return -EIO; |
| } |
| |
| ret = can_stm32_runtime_configure(dev, CAN_NORMAL_MODE, 0); |
| if (ret) { |
| return ret; |
| } |
| |
| cfg->config_irq(can); |
| can->IER |= CAN_IT_TME; |
| LOG_INF("Init of %s done", dev->config->name); |
| return 0; |
| } |
| |
| int can_stm32_send(struct device *dev, const struct zcan_frame *msg, |
| s32_t timeout, can_tx_callback_t callback) |
| { |
| const struct can_stm32_config *cfg = DEV_CFG(dev); |
| struct can_stm32_data *data = DEV_DATA(dev); |
| CAN_TypeDef *can = cfg->can; |
| u32_t transmit_status_register = can->TSR; |
| CAN_TxMailBox_TypeDef *mailbox = NULL; |
| struct k_mutex *tx_mutex = &data->tx_mutex; |
| struct can_mailbox *mb = NULL; |
| |
| LOG_DBG("Sending %d bytes on %s. " |
| "Id: 0x%x, " |
| "ID type: %s, " |
| "Remote Frame: %s" |
| , msg->dlc, dev->config->name |
| , msg->id_type == CAN_STANDARD_IDENTIFIER ? |
| msg->std_id : msg->ext_id |
| , msg->id_type == CAN_STANDARD_IDENTIFIER ? |
| "standard" : "extended" |
| , msg->rtr == CAN_DATAFRAME ? "no" : "yes"); |
| |
| __ASSERT(msg->dlc == 0U || msg->data != NULL, "Dataptr is null"); |
| __ASSERT(msg->dlc <= CAN_MAX_DLC, "DLC > 8"); |
| |
| if (can->ESR & CAN_ESR_BOFF) { |
| return CAN_TX_BUS_OFF; |
| } |
| |
| k_mutex_lock(tx_mutex, K_FOREVER); |
| while (!(transmit_status_register & CAN_TSR_TME)) { |
| k_mutex_unlock(tx_mutex); |
| LOG_DBG("Transmit buffer full. Wait with timeout (%dms)", |
| timeout); |
| if (k_sem_take(&data->tx_int_sem, timeout)) { |
| return CAN_TIMEOUT; |
| } |
| |
| k_mutex_lock(tx_mutex, K_FOREVER); |
| transmit_status_register = can->TSR; |
| } |
| |
| if (transmit_status_register & CAN_TSR_TME0) { |
| LOG_DBG("Using mailbox 0"); |
| mailbox = &can->sTxMailBox[CAN_TXMAILBOX_0]; |
| mb = &(data->mb0); |
| } else if (transmit_status_register & CAN_TSR_TME1) { |
| LOG_DBG("Using mailbox 1"); |
| mailbox = &can->sTxMailBox[CAN_TXMAILBOX_1]; |
| mb = &data->mb1; |
| } else if (transmit_status_register & CAN_TSR_TME2) { |
| LOG_DBG("Using mailbox 2"); |
| mailbox = &can->sTxMailBox[CAN_TXMAILBOX_2]; |
| mb = &data->mb2; |
| } |
| |
| mb->tx_callback = callback; |
| k_sem_reset(&mb->tx_int_sem); |
| |
| /* mailbix identifier register setup */ |
| mailbox->TIR &= CAN_TI0R_TXRQ; |
| |
| if (msg->id_type == CAN_STANDARD_IDENTIFIER) { |
| mailbox->TIR |= (msg->std_id << CAN_TI0R_STID_Pos); |
| } else { |
| mailbox->TIR |= (msg->ext_id << CAN_TI0R_EXID_Pos) |
| | CAN_TI0R_IDE; |
| } |
| |
| if (msg->rtr == CAN_REMOTEREQUEST) { |
| mailbox->TIR |= CAN_TI1R_RTR; |
| } |
| |
| mailbox->TDTR = (mailbox->TDTR & ~CAN_TDT1R_DLC) | |
| ((msg->dlc & 0xF) << CAN_TDT1R_DLC_Pos); |
| |
| mailbox->TDLR = msg->data_32[0]; |
| mailbox->TDHR = msg->data_32[1]; |
| |
| mailbox->TIR |= CAN_TI0R_TXRQ; |
| k_mutex_unlock(tx_mutex); |
| |
| if (callback == NULL) { |
| k_sem_take(&mb->tx_int_sem, K_FOREVER); |
| return mb->error_flags; |
| } |
| |
| return 0; |
| } |
| |
| static inline int can_stm32_check_free(void **arr, int start, int end) |
| { |
| int i; |
| |
| for (i = start; i <= end; i++) { |
| if (arr[i] != NULL) { |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static int can_stm32_shift_arr(void **arr, int start, int count) |
| { |
| void **start_ptr = arr + start; |
| size_t cnt; |
| |
| if (start > CONFIG_CAN_MAX_FILTER) { |
| return CAN_NO_FREE_FILTER; |
| } |
| |
| if (count > 0) { |
| void *move_dest; |
| |
| /* Check if nothing used will be overwritten */ |
| if (!can_stm32_check_free(arr, CONFIG_CAN_MAX_FILTER - count, |
| CONFIG_CAN_MAX_FILTER - 1)) { |
| return CAN_NO_FREE_FILTER; |
| } |
| |
| /* No need to shift. Destination is already outside the arr*/ |
| if ((start + count) >= CONFIG_CAN_MAX_FILTER) { |
| return 0; |
| } |
| |
| cnt = (CONFIG_CAN_MAX_FILTER - start - count) * sizeof(void *); |
| move_dest = start_ptr + count; |
| memmove(move_dest, start_ptr, cnt); |
| (void)memset(start_ptr, 0, count * sizeof(void *)); |
| } else if (count < 0) { |
| count = -count; |
| |
| if (start - count < 0) { |
| return CAN_NO_FREE_FILTER; |
| } |
| |
| cnt = (CONFIG_CAN_MAX_FILTER - start) * sizeof(void *); |
| memmove(start_ptr - count, start_ptr, cnt); |
| (void)memset(arr + CONFIG_CAN_MAX_FILTER - count, 0, |
| count * sizeof(void *)); |
| } |
| |
| return 0; |
| } |
| |
| static inline void can_stm32_shift_bits(u64_t *bits, int start, int count) |
| { |
| u64_t mask_right; |
| u64_t mask_left; |
| |
| if (count > 0) { |
| mask_right = ~(UINT64_MAX << start); |
| *bits = (*bits & mask_right) | ((*bits & ~mask_right) << count); |
| } else if (count < 0) { |
| count = -count; |
| mask_left = UINT64_MAX << start; |
| mask_right = ~(UINT64_MAX << (start - count)); |
| *bits = (*bits & mask_right) | ((*bits & mask_left) >> count); |
| } |
| } |
| |
| enum can_filter_type can_stm32_get_filter_type(int bank_nr, u32_t mode_reg, |
| u32_t scale_reg) |
| { |
| u32_t mode_masked = (mode_reg >> bank_nr) & 0x01; |
| u32_t scale_masked = (scale_reg >> bank_nr) & 0x01; |
| enum can_filter_type type = (scale_masked << 1) | mode_masked; |
| |
| return type; |
| } |
| |
| static int can_calc_filter_index(int filter_nr, u32_t mode_reg, u32_t scale_reg) |
| { |
| int filter_bank = filter_nr / 4; |
| int cnt = 0; |
| u32_t mode_masked, scale_masked; |
| enum can_filter_type filter_type; |
| /*count filters in the banks before */ |
| for (int i = 0; i < filter_bank; i++) { |
| filter_type = can_stm32_get_filter_type(i, mode_reg, scale_reg); |
| cnt += filter_in_bank[filter_type]; |
| } |
| |
| /* plus the filters in the same bank */ |
| mode_masked = mode_reg & (1U << filter_bank); |
| scale_masked = scale_reg & (1U << filter_bank); |
| cnt += (!scale_masked && mode_masked) ? filter_nr & 0x03 : |
| (filter_nr & 0x03) >> 1; |
| return cnt; |
| } |
| |
| static void can_stm32_set_filter_bank(int filter_nr, |
| CAN_FilterRegister_TypeDef *filter_reg, |
| enum can_filter_type filter_type, |
| u32_t id, u32_t mask) |
| { |
| switch (filter_type) { |
| case CAN_FILTER_STANDARD: |
| switch (filter_nr & 0x03) { |
| case 0: |
| filter_reg->FR1 = (filter_reg->FR1 & 0xFFFF0000) | id; |
| break; |
| case 1: |
| filter_reg->FR1 = (filter_reg->FR1 & 0x0000FFFF) |
| | (id << 16); |
| break; |
| case 2: |
| filter_reg->FR2 = (filter_reg->FR2 & 0xFFFF0000) | id; |
| break; |
| case 3: |
| filter_reg->FR2 = (filter_reg->FR2 & 0x0000FFFF) |
| | (id << 16); |
| break; |
| } |
| |
| break; |
| case CAN_FILTER_STANDARD_MASKED: |
| switch (filter_nr & 0x02) { |
| case 0: |
| filter_reg->FR1 = id | (mask << 16); |
| break; |
| case 2: |
| filter_reg->FR2 = id | (mask << 16); |
| break; |
| } |
| |
| break; |
| case CAN_FILTER_EXTENDED: |
| switch (filter_nr & 0x02) { |
| case 0: |
| filter_reg->FR1 = id; |
| break; |
| case 2: |
| filter_reg->FR2 = id; |
| break; |
| } |
| |
| break; |
| case CAN_FILTER_EXTENDED_MASKED: |
| filter_reg->FR1 = id; |
| filter_reg->FR2 = mask; |
| break; |
| } |
| } |
| |
| static inline void can_stm32_set_mode_scale(enum can_filter_type filter_type, |
| u32_t *mode_reg, u32_t *scale_reg, |
| int bank_nr) |
| { |
| u32_t mode_reg_bit = (filter_type & 0x01) << bank_nr; |
| u32_t scale_reg_bit = (filter_type >> 1) << bank_nr; |
| |
| *mode_reg &= ~(1 << bank_nr); |
| *mode_reg |= mode_reg_bit; |
| |
| *scale_reg &= ~(1 << bank_nr); |
| *scale_reg |= scale_reg_bit; |
| } |
| |
| static inline u32_t can_generate_std_mask(const struct zcan_filter *filter) |
| { |
| return (filter->std_id_mask << CAN_FIRX_STD_ID_POS) | |
| (filter->rtr_mask << CAN_FIRX_STD_RTR_POS) | |
| (1U << CAN_FIRX_STD_IDE_POS); |
| } |
| |
| static inline u32_t can_generate_ext_mask(const struct zcan_filter *filter) |
| { |
| return (filter->ext_id_mask << CAN_FIRX_EXT_EXT_ID_POS) | |
| (filter->rtr_mask << CAN_FIRX_EXT_RTR_POS) | |
| (1U << CAN_FIRX_EXT_IDE_POS); |
| } |
| |
| static inline u32_t can_generate_std_id(const struct zcan_filter *filter) |
| { |
| |
| return (filter->std_id << CAN_FIRX_STD_ID_POS) | |
| (filter->rtr << CAN_FIRX_STD_RTR_POS); |
| |
| } |
| |
| static inline u32_t can_generate_ext_id(const struct zcan_filter *filter) |
| { |
| return (filter->ext_id << CAN_FIRX_EXT_EXT_ID_POS) | |
| (filter->rtr << CAN_FIRX_EXT_RTR_POS) | |
| (1U << CAN_FIRX_EXT_IDE_POS); |
| } |
| |
| static inline int can_stm32_set_filter(const struct zcan_filter *filter, |
| struct can_stm32_data *device_data, |
| CAN_TypeDef *can, |
| int *filter_index) |
| { |
| u32_t mask = 0U; |
| u32_t id = 0U; |
| int filter_nr = 0; |
| int filter_index_new = CAN_NO_FREE_FILTER; |
| int bank_nr; |
| u32_t bank_bit; |
| int register_demand; |
| enum can_filter_type filter_type; |
| enum can_filter_type bank_mode; |
| |
| if (filter->id_type == CAN_STANDARD_IDENTIFIER) { |
| id = can_generate_std_id(filter); |
| filter_type = CAN_FILTER_STANDARD; |
| |
| if (filter->std_id_mask != CAN_STD_ID_MASK) { |
| mask = can_generate_std_mask(filter); |
| filter_type = CAN_FILTER_STANDARD_MASKED; |
| } |
| } else { |
| id = can_generate_ext_id(filter); |
| filter_type = CAN_FILTER_EXTENDED; |
| |
| if (filter->ext_id_mask != CAN_EXT_ID_MASK) { |
| mask = can_generate_ext_mask(filter); |
| filter_type = CAN_FILTER_EXTENDED_MASKED; |
| } |
| } |
| |
| register_demand = reg_demand[filter_type]; |
| |
| LOG_DBG("Setting filter ID: 0x%x, mask: 0x%x", filter->ext_id, |
| filter->ext_id_mask); |
| LOG_DBG("Filter type: %s ID %s mask (%d)", |
| (filter_type == CAN_FILTER_STANDARD || |
| filter_type == CAN_FILTER_STANDARD_MASKED) ? |
| "standard" : "extended", |
| (filter_type == CAN_FILTER_STANDARD_MASKED || |
| filter_type == CAN_FILTER_EXTENDED_MASKED) ? |
| "with" : "without", |
| filter_type); |
| |
| do { |
| u64_t usage_shifted = (device_data->filter_usage >> filter_nr); |
| u64_t usage_demand_mask = (1ULL << register_demand) - 1; |
| bool bank_is_empty; |
| |
| bank_nr = filter_nr / 4; |
| bank_bit = (1U << bank_nr); |
| bank_mode = can_stm32_get_filter_type(bank_nr, can->FM1R, |
| can->FS1R); |
| |
| bank_is_empty = CAN_BANK_IS_EMPTY(device_data->filter_usage, |
| bank_nr); |
| |
| if (!bank_is_empty && bank_mode != filter_type) { |
| filter_nr = (bank_nr + 1) * 4; |
| } else if (usage_shifted & usage_demand_mask) { |
| device_data->filter_usage &= |
| ~(usage_demand_mask << filter_nr); |
| break; |
| } else { |
| filter_nr += register_demand; |
| } |
| |
| if (!usage_shifted) { |
| LOG_INF("No free filter bank found"); |
| return CAN_NO_FREE_FILTER; |
| } |
| } while (filter_nr < CAN_MAX_NUMBER_OF_FILTERS); |
| |
| /* set the filter init mode */ |
| can->FMR |= CAN_FMR_FINIT; |
| can->FA1R &= ~bank_bit; |
| |
| /* TODO fifo balancing */ |
| if (filter_type != bank_mode) { |
| int shift_width, start_index; |
| int res; |
| u32_t mode_reg = can->FM1R; |
| u32_t scale_reg = can->FS1R; |
| |
| can_stm32_set_mode_scale(filter_type, &mode_reg, &scale_reg, |
| bank_nr); |
| |
| shift_width = filter_in_bank[filter_type] - filter_in_bank[bank_mode]; |
| |
| filter_index_new = can_calc_filter_index(filter_nr, mode_reg, |
| scale_reg); |
| |
| start_index = filter_index_new + filter_in_bank[bank_mode]; |
| |
| if (shift_width && start_index <= CAN_MAX_NUMBER_OF_FILTERS) { |
| res = can_stm32_shift_arr(device_data->rx_response, |
| start_index, |
| shift_width); |
| |
| if (filter_index_new >= CONFIG_CAN_MAX_FILTER || res) { |
| LOG_INF("No space for a new filter!"); |
| filter_nr = CAN_NO_FREE_FILTER; |
| goto done; |
| } |
| |
| can_stm32_shift_bits(&device_data->response_type, |
| start_index, |
| shift_width); |
| } |
| |
| can->FM1R = mode_reg; |
| can->FS1R = scale_reg; |
| } else { |
| filter_index_new = can_calc_filter_index(filter_nr, can->FM1R, |
| can->FS1R); |
| if (filter_index_new >= CAN_MAX_NUMBER_OF_FILTERS) { |
| filter_nr = CAN_NO_FREE_FILTER; |
| goto done; |
| } |
| } |
| |
| can_stm32_set_filter_bank(filter_nr, &can->sFilterRegister[bank_nr], |
| filter_type, id, mask); |
| done: |
| can->FA1R |= bank_bit; |
| can->FMR &= ~(CAN_FMR_FINIT); |
| LOG_DBG("Filter set! Filter number: %d (index %d)", |
| filter_nr, filter_index_new); |
| *filter_index = filter_index_new; |
| return filter_nr; |
| } |
| |
| |
| static inline int can_stm32_attach(struct device *dev, void *response_ptr, |
| const struct zcan_filter *filter, |
| int *filter_index) |
| { |
| const struct can_stm32_config *cfg = DEV_CFG(dev); |
| struct can_stm32_data *data = DEV_DATA(dev); |
| CAN_TypeDef *can = cfg->can; |
| int filter_index_tmp = 0; |
| int filter_nr; |
| |
| filter_nr = can_stm32_set_filter(filter, data, can, &filter_index_tmp); |
| if (filter_nr != CAN_NO_FREE_FILTER) { |
| data->rx_response[filter_index_tmp] = response_ptr; |
| } |
| |
| *filter_index = filter_index_tmp; |
| return filter_nr; |
| } |
| |
| int can_stm32_attach_msgq(struct device *dev, struct k_msgq *msgq, |
| const struct zcan_filter *filter) |
| { |
| int filter_nr; |
| int filter_index; |
| struct can_stm32_data *data = DEV_DATA(dev); |
| |
| k_mutex_lock(&data->set_filter_mutex, K_FOREVER); |
| filter_nr = can_stm32_attach(dev, msgq, filter, &filter_index); |
| data->response_type |= (1ULL << filter_index); |
| k_mutex_unlock(&data->set_filter_mutex); |
| return filter_nr; |
| } |
| |
| int can_stm32_attach_isr(struct device *dev, can_rx_callback_t isr, |
| const struct zcan_filter *filter) |
| { |
| struct can_stm32_data *data = DEV_DATA(dev); |
| int filter_nr; |
| int filter_index; |
| |
| k_mutex_lock(&data->set_filter_mutex, K_FOREVER); |
| filter_nr = can_stm32_attach(dev, isr, filter, &filter_index); |
| data->response_type &= ~(1ULL << filter_index); |
| k_mutex_unlock(&data->set_filter_mutex); |
| return filter_nr; |
| } |
| |
| void can_stm32_detach(struct device *dev, int filter_nr) |
| { |
| const struct can_stm32_config *cfg = DEV_CFG(dev); |
| struct can_stm32_data *data = DEV_DATA(dev); |
| CAN_TypeDef *can = cfg->can; |
| int bank_nr; |
| int filter_index; |
| u32_t bank_bit; |
| u32_t mode_reg; |
| u32_t scale_reg; |
| enum can_filter_type type; |
| u32_t reset_mask; |
| |
| __ASSERT_NO_MSG(filter_nr >= 0 && filter_nr < CAN_MAX_NUMBER_OF_FILTERS); |
| |
| k_mutex_lock(&data->set_filter_mutex, K_FOREVER); |
| |
| bank_nr = filter_nr / 4; |
| bank_bit = (1U << bank_nr); |
| mode_reg = can->FM1R; |
| scale_reg = can->FS1R; |
| |
| filter_index = can_calc_filter_index(filter_nr, mode_reg, scale_reg); |
| type = can_stm32_get_filter_type(bank_nr, mode_reg, scale_reg); |
| |
| LOG_DBG("Detatch filter number %d (index %d), type %d", filter_nr, |
| filter_index, |
| type); |
| |
| reset_mask = ((1 << (reg_demand[type])) - 1) << filter_nr; |
| data->filter_usage |= reset_mask; |
| can->FMR |= CAN_FMR_FINIT; |
| can->FA1R &= ~bank_bit; |
| |
| can_stm32_set_filter_bank(filter_nr, &can->sFilterRegister[bank_nr], |
| type, 0, 0xFFFFFFFF); |
| |
| if (!CAN_BANK_IS_EMPTY(data->filter_usage, bank_nr)) { |
| can->FA1R |= bank_bit; |
| } else { |
| LOG_DBG("Bank number %d is empty -> deakivate", bank_nr); |
| } |
| |
| can->FMR &= ~(CAN_FMR_FINIT); |
| data->rx_response[filter_index] = NULL; |
| data->response_type &= ~(1ULL << filter_index); |
| |
| k_mutex_unlock(&data->set_filter_mutex); |
| } |
| |
| static const struct can_driver_api can_api_funcs = { |
| .configure = can_stm32_runtime_configure, |
| .send = can_stm32_send, |
| .attach_msgq = can_stm32_attach_msgq, |
| .attach_isr = can_stm32_attach_isr, |
| .detach = can_stm32_detach |
| }; |
| |
| #ifdef CONFIG_CAN_1 |
| |
| static void config_can_1_irq(CAN_TypeDef *can); |
| |
| static const struct can_stm32_config can_stm32_cfg_1 = { |
| .can = (CAN_TypeDef *)DT_CAN_1_BASE_ADDRESS, |
| .bus_speed = DT_CAN_1_BUS_SPEED, |
| .sjw = DT_CAN_1_SJW, |
| .prop_bs1 = DT_CAN_1_PROP_SEG_PHASE_SEG1, |
| .bs2 = DT_CAN_1_PHASE_SEG2, |
| .pclken = { |
| .enr = DT_CAN_1_CLOCK_BITS, |
| .bus = DT_CAN_1_CLOCK_BUS, |
| }, |
| .config_irq = config_can_1_irq |
| }; |
| |
| static struct can_stm32_data can_stm32_dev_data_1; |
| |
| DEVICE_AND_API_INIT(can_stm32_1, DT_CAN_1_NAME, &can_stm32_init, |
| &can_stm32_dev_data_1, &can_stm32_cfg_1, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &can_api_funcs); |
| |
| static void config_can_1_irq(CAN_TypeDef *can) |
| { |
| LOG_DBG("Enable CAN1 IRQ"); |
| #ifdef CONFIG_SOC_SERIES_STM32F0X |
| IRQ_CONNECT(DT_CAN_1_IRQ, DT_CAN_1_IRQ_PRIORITY, can_stm32_isr, |
| DEVICE_GET(can_stm32_1), 0); |
| irq_enable(DT_CAN_1_IRQ); |
| #else |
| IRQ_CONNECT(DT_CAN_1_IRQ_RX0, DT_CAN_1_IRQ_PRIORITY, |
| can_stm32_rx_isr, DEVICE_GET(can_stm32_1), 0); |
| irq_enable(DT_CAN_1_IRQ_RX0); |
| |
| IRQ_CONNECT(DT_CAN_1_IRQ_TX, DT_CAN_1_IRQ_PRIORITY, |
| can_stm32_tx_isr, DEVICE_GET(can_stm32_1), 0); |
| irq_enable(DT_CAN_1_IRQ_TX); |
| |
| IRQ_CONNECT(DT_CAN_1_IRQ_SCE, DT_CAN_1_IRQ_PRIORITY, |
| can_stm32_tx_isr, DEVICE_GET(can_stm32_1), 0); |
| irq_enable(DT_CAN_1_IRQ_SCE); |
| #endif |
| can->IER |= CAN_IT_TME | CAN_IT_ERR | CAN_IT_FMP0 | CAN_IT_FMP1; |
| } |
| |
| #if defined(CONFIG_NET_SOCKETS_CAN) |
| |
| #include "socket_can_generic.h" |
| |
| static int socket_can_init_1(struct device *dev) |
| { |
| struct device *can_dev = DEVICE_GET(can_stm32_1); |
| struct socket_can_context *socket_context = dev->driver_data; |
| |
| LOG_DBG("Init socket CAN device %p (%s) for dev %p (%s)", |
| dev, dev->config->name, can_dev, can_dev->config->name); |
| |
| socket_context->can_dev = can_dev; |
| socket_context->msgq = &socket_can_msgq; |
| |
| socket_context->rx_tid = |
| k_thread_create(&socket_context->rx_thread_data, |
| rx_thread_stack, |
| K_THREAD_STACK_SIZEOF(rx_thread_stack), |
| rx_thread, socket_context, NULL, NULL, |
| RX_THREAD_PRIORITY, 0, K_NO_WAIT); |
| |
| return 0; |
| } |
| |
| NET_DEVICE_INIT(socket_can_stm32_1, SOCKET_CAN_NAME_1, socket_can_init_1, |
| &socket_can_context_1, NULL, |
| CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &socket_can_api, |
| CANBUS_L2, NET_L2_GET_CTX_TYPE(CANBUS_L2), CAN_MTU); |
| |
| #endif /* CONFIG_NET_SOCKETS_CAN */ |
| |
| #endif /*CONFIG_CAN_1*/ |