| /* |
| * Copyright (c) 2017 Linaro Limited |
| * Copyright (c) 2017 BayLibre, SAS |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define LOG_DOMAIN flash_stm32l4 |
| #define LOG_LEVEL CONFIG_FLASH_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(LOG_DOMAIN); |
| |
| #include <kernel.h> |
| #include <device.h> |
| #include <string.h> |
| #include <flash.h> |
| #include <init.h> |
| #include <soc.h> |
| |
| #include "flash_stm32.h" |
| |
| #if !defined (STM32L4R5xx) && !defined (STM32L4R7xx) && !defined (STM32L4R9xx) && !defined (STM32L4S5xx) && !defined (STM32L4S7xx) && !defined (STM32L4S9xx) |
| #define STM32L4X_PAGE_SHIFT 11 |
| #else |
| #define STM32L4X_PAGE_SHIFT 12 |
| #endif |
| |
| /* offset and len must be aligned on 8 for write |
| * , positive and not beyond end of flash */ |
| bool flash_stm32_valid_range(struct device *dev, off_t offset, u32_t len, |
| bool write) |
| { |
| return (!write || (offset % 8 == 0 && len % 8 == 0U)) && |
| flash_stm32_range_exists(dev, offset, len); |
| } |
| |
| /* |
| * STM32L4xx devices can have up to 512 2K pages on two 256x2K pages banks |
| * |
| * STM32L4R/Sxx devices can have up to 512 4K pages on two 256x4K pages banks |
| */ |
| static unsigned int get_page(off_t offset) |
| { |
| return offset >> STM32L4X_PAGE_SHIFT; |
| } |
| |
| static int write_dword(struct device *dev, off_t offset, u64_t val) |
| { |
| volatile u32_t *flash = (u32_t *)(offset + CONFIG_FLASH_BASE_ADDRESS); |
| struct stm32l4x_flash *regs = FLASH_STM32_REGS(dev); |
| #ifdef FLASH_OPTR_DUALBANK |
| bool dcache_enabled = false; |
| #endif /* FLASH_OPTR_DUALBANK */ |
| u32_t tmp; |
| int rc; |
| |
| /* if the control register is locked, do not fail silently */ |
| if (regs->cr & FLASH_CR_LOCK) { |
| return -EIO; |
| } |
| |
| /* Check that no Flash main memory operation is ongoing */ |
| rc = flash_stm32_wait_flash_idle(dev); |
| if (rc < 0) { |
| return rc; |
| } |
| |
| /* Check if this double word is erased */ |
| if (flash[0] != 0xFFFFFFFFUL || |
| flash[1] != 0xFFFFFFFFUL) { |
| return -EIO; |
| } |
| |
| #ifdef FLASH_OPTR_DUALBANK |
| /* |
| * Disable the data cache to avoid the silicon errata 2.2.3: |
| * "Data cache might be corrupted during Flash memory read-while-write operation" |
| */ |
| if (regs->acr.val & FLASH_ACR_DCEN) { |
| dcache_enabled = true; |
| regs->acr.val &= (~FLASH_ACR_DCEN); |
| } |
| #endif /* FLASH_OPTR_DUALBANK */ |
| |
| /* Set the PG bit */ |
| regs->cr |= FLASH_CR_PG; |
| |
| /* Flush the register write */ |
| tmp = regs->cr; |
| |
| /* Perform the data write operation at the desired memory address */ |
| flash[0] = (u32_t)val; |
| flash[1] = (u32_t)(val >> 32); |
| |
| /* Wait until the BSY bit is cleared */ |
| rc = flash_stm32_wait_flash_idle(dev); |
| |
| /* Clear the PG bit */ |
| regs->cr &= (~FLASH_CR_PG); |
| |
| #ifdef FLASH_OPTR_DUALBANK |
| /* Reset/enable the data cache if previously enabled */ |
| if (dcache_enabled) { |
| regs->acr.val |= FLASH_ACR_DCRST; |
| regs->acr.val &= (~FLASH_ACR_DCRST); |
| regs->acr.val |= FLASH_ACR_DCEN; |
| } |
| #endif /* FLASH_OPTR_DUALBANK */ |
| |
| return rc; |
| } |
| |
| static int erase_page(struct device *dev, unsigned int page) |
| { |
| struct stm32l4x_flash *regs = FLASH_STM32_REGS(dev); |
| u32_t tmp; |
| int rc; |
| |
| /* if the control register is locked, do not fail silently */ |
| if (regs->cr & FLASH_CR_LOCK) { |
| return -EIO; |
| } |
| |
| /* Check that no Flash memory operation is ongoing */ |
| rc = flash_stm32_wait_flash_idle(dev); |
| if (rc < 0) { |
| return rc; |
| } |
| |
| /* Set the PER bit and select the page you wish to erase */ |
| regs->cr |= FLASH_CR_PER; |
| #ifdef FLASH_CR_BKER |
| regs->cr &= ~FLASH_CR_BKER_Msk; |
| /* Select bank, only for DUALBANK devices */ |
| if (page >= 256U) |
| regs->cr |= FLASH_CR_BKER; |
| #endif |
| regs->cr &= ~FLASH_CR_PNB_Msk; |
| regs->cr |= ((page % 256) << 3); |
| |
| /* Set the STRT bit */ |
| regs->cr |= FLASH_CR_STRT; |
| |
| /* flush the register write */ |
| tmp = regs->cr; |
| |
| /* Wait for the BSY bit */ |
| rc = flash_stm32_wait_flash_idle(dev); |
| |
| regs->cr &= ~FLASH_CR_PER; |
| |
| return rc; |
| } |
| |
| int flash_stm32_block_erase_loop(struct device *dev, unsigned int offset, |
| unsigned int len) |
| { |
| int i, rc = 0; |
| |
| i = get_page(offset); |
| for (; i <= get_page(offset + len - 1) ; ++i) { |
| rc = erase_page(dev, i); |
| if (rc < 0) { |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| int flash_stm32_write_range(struct device *dev, unsigned int offset, |
| const void *data, unsigned int len) |
| { |
| int i, rc = 0; |
| |
| for (i = 0; i < len; i += 8, offset += 8U) { |
| rc = write_dword(dev, offset, |
| UNALIGNED_GET((const u64_t *) data + (i >> 3))); |
| if (rc < 0) { |
| return rc; |
| } |
| } |
| |
| return rc; |
| } |
| |
| void flash_stm32_page_layout(struct device *dev, |
| const struct flash_pages_layout **layout, |
| size_t *layout_size) |
| { |
| static struct flash_pages_layout stm32l4_flash_layout = { |
| .pages_count = 0, |
| .pages_size = 0, |
| }; |
| |
| ARG_UNUSED(dev); |
| |
| if (stm32l4_flash_layout.pages_count == 0) { |
| stm32l4_flash_layout.pages_count = FLASH_SIZE / FLASH_PAGE_SIZE; |
| stm32l4_flash_layout.pages_size = FLASH_PAGE_SIZE; |
| } |
| |
| *layout = &stm32l4_flash_layout; |
| *layout_size = 1; |
| } |