| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <misc/printk.h> |
| #include <shell/shell.h> |
| #include <init.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <gpio.h> |
| #include <stdlib.h> |
| #include <ctype.h> |
| #include <logging/log.h> |
| |
| #define LOG_LEVEL CONFIG_LOG_DEFAULT_LEVEL |
| |
| LOG_MODULE_REGISTER(gpio_shell); |
| |
| struct args_index { |
| u8_t port; |
| u8_t index; |
| u8_t mode; |
| u8_t value; |
| }; |
| |
| struct args_number { |
| u8_t conf; |
| u8_t set; |
| u8_t get; |
| u8_t listen; |
| }; |
| |
| static const struct args_index args_indx = { |
| .port = 1, |
| .index = 2, |
| .mode = 3, |
| .value = 3, |
| }; |
| |
| static const struct args_number args_no = { |
| .conf = 4, |
| .set = 4, |
| .get = 3, |
| .listen = 7 |
| }; |
| |
| static int cmd_gpio_conf(const struct shell *shell, size_t argc, char **argv) |
| { |
| u8_t index = 0U; |
| int type = GPIO_DIR_OUT; |
| struct device *dev; |
| |
| if (argc == args_no.conf && |
| isdigit((unsigned char)argv[args_indx.index][0]) && |
| isalpha((unsigned char)argv[args_indx.mode][0])) { |
| index = (u8_t)atoi(argv[args_indx.index]); |
| if (!strcmp(argv[args_indx.mode], "in")) { |
| type = GPIO_DIR_IN; |
| } else if (!strcmp(argv[args_indx.mode], "out")) { |
| type = GPIO_DIR_OUT; |
| } else { |
| return 0; |
| } |
| } else { |
| shell_error(shell, "Wrong parameters for conf"); |
| return -ENOTSUP; |
| } |
| |
| dev = device_get_binding(argv[args_indx.port]); |
| |
| if (dev != NULL) { |
| index = (uint8_t)atoi(argv[args_indx.index]); |
| shell_print(shell, "Configuring %s pin %d", |
| argv[args_indx.port], index); |
| gpio_pin_configure(dev, index, type); |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_gpio_get(const struct shell *shell, |
| size_t argc, char **argv) |
| { |
| struct device *dev; |
| u8_t index = 0U; |
| u32_t value = 0U; |
| int rc; |
| |
| if (argc == args_no.get && isdigit((unsigned char)argv[args_indx.index][0])) { |
| index = (uint8_t)atoi(argv[args_indx.index]); |
| } else { |
| shell_error(shell, "Wrong parameters for get"); |
| return -EINVAL; |
| } |
| |
| dev = device_get_binding(argv[args_indx.port]); |
| |
| if (dev != NULL) { |
| index = (u8_t)atoi(argv[2]); |
| shell_print(shell, "Reading %s pin %d", |
| argv[args_indx.port], index); |
| rc = gpio_pin_read(dev, index, &value); |
| if (rc == 0) { |
| shell_print(shell, "Value %d", value); |
| } else { |
| shell_error(shell, "Error reading value"); |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_gpio_set(const struct shell *shell, |
| size_t argc, char **argv) |
| { |
| struct device *dev; |
| u8_t index = 0U; |
| u8_t value = 0U; |
| |
| if (argc == args_no.set && |
| isdigit((unsigned char)argv[args_indx.index][0]) && |
| isdigit((unsigned char)argv[args_indx.value][0])) { |
| index = (uint8_t)atoi(argv[args_indx.index]); |
| value = (uint8_t)atoi(argv[args_indx.value]); |
| } else { |
| shell_print(shell, "Wrong parameters for set"); |
| return -EINVAL; |
| } |
| dev = device_get_binding(argv[args_indx.port]); |
| |
| if (dev != NULL) { |
| index = (u8_t)atoi(argv[2]); |
| shell_print(shell, "Writing to %s pin %d", |
| argv[args_indx.port], index); |
| gpio_pin_write(dev, index, value); |
| } |
| |
| return 0; |
| } |
| |
| |
| SHELL_STATIC_SUBCMD_SET_CREATE(sub_gpio, |
| SHELL_CMD(conf, NULL, "Configure GPIO", cmd_gpio_conf), |
| SHELL_CMD(get, NULL, "Get GPIO value", cmd_gpio_get), |
| SHELL_CMD(set, NULL, "Set GPIO", cmd_gpio_set), |
| SHELL_SUBCMD_SET_END /* Array terminated. */ |
| ); |
| |
| SHELL_CMD_REGISTER(gpio, &sub_gpio, "GPIO commands", NULL); |