blob: f2cf395c1b99216f00070db694ef21d75df82d51 [file] [log] [blame]
.. _efr32_radio_brd4250b:
EFR32 BRD4250B (SLWRB4250B)
###########################
Overview
********
The EFR32FG1 Flex Gecko 2.4 GHz and 868 MHz Radio Board is delivered as part of
`SLWSTK6061B Proprietary Wireless Starter Kit`_. It contains a EFR32FG1 Wireless
SoC built on an ARM Cortex®-M4F processor with excellent low power capabilities.
.. figure:: efr32fg1-slwrb4250b.jpg
:align: center
:alt: SLWRB4250B Flex Gecko 2.4 GHz and 868 MHz Radio Board
SLWRB4250B (image courtesy of Silicon Labs)
The BRD4250B a.k.a. SLWRB4250B radio board plugs into the Wireless Starter Kit
Mainboard BRD4001A and is supported as one of :ref:`efr32_radio`.
Hardware
********
- EFR32FG1P133F256GM48 Flex Gecko SoC
- CPU core: ARM Cortex®-M4 with FPU
- Flash memory: 256 kB
- RAM: 32 kB
- Transmit power: up to +13 dBm
- Operation frequency: 2.4 GHz, 868 MHz
- 8Mbit SPI NOR Flash
- Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz).
For more information about the EFR32FG1 SoC and BRD4250B board, refer to these
documents:
- `EFR32FG1 Website`_
- `EFR32FG1 Datasheet`_
- `EFR32xG1 Reference Manual`_
- `SLWSTK6061B Proprietary Wireless Starter Kit`_
- `BRD4250B User Guide`_
- `BRD4250B Reference Manual`_
- `EFR32FG1-BRD4250B Schematics`_
Supported Features
==================
Please refer to
:ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
for details of the configuration and common features supported by the
efr32_radio_brd4250b board.
The default configuration can be found in the defconfig file:
``boards/arm/efr32_radio/efr32_radio_brd4250b_defconfig``
System Clock
============
The EFR32FG1P SoC is configured to use the 38.4 MHz external oscillator on the
board.
Serial Port
===========
The EFR32FG1P SoC has two USARTs and one Low Energy UARTs (LEUART).
USART0 is connected to the board controller and is used for the console.
Programming and Debugging
*************************
Please refer to
:ref:`Programming and Debugging EFR32 Radio Board <efr32_radio_programming>`
for details on the supported debug interfaces.
Flashing
========
Connect the BRD4001A board with a mounted BRD4250B radio module to your host
computer using the USB port.
Here is an example for the :ref:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: efr32_radio_brd4250b
:goals: flash
Open a serial terminal (minicom, putty, etc.) with the following settings:
- Speed: 115200
- Data: 8 bits
- Parity: None
- Stop bits: 1
Reset the board and you should see the following message in the terminal:
.. code-block:: console
Hello World! efr32_radio_brd4250b
.. _EFR32FG1 Website:
https://www.silabs.com/products/wireless/proprietary/efr32-flex-gecko-2-4-ghz-sub-ghz
.. _EFR32FG1 Datasheet:
https://www.silabs.com/documents/public/data-sheets/efr32fg1-datasheet.pdf
.. _EFR32xG1 Reference Manual:
https://www.silabs.com/documents/public/reference-manuals/efr32xg1-rm.pdf
.. _SLWSTK6061B Proprietary Wireless Starter Kit:
https://www.silabs.com/products/development-tools/wireless/proprietary/slwstk6061b-efr32-flex-gecko-868-mhz-2-4-ghz-and-sub-ghz-starter-kit
.. _BRD4250B User Guide:
https://www.silabs.com/documents/public/user-guides/ug182-brd4250b-user-guide.pdf
.. _BRD4250B Reference Manual:
https://www.silabs.com/documents/public/reference-manuals/brd4250b-rm.pdf
.. _EFR32FG1-BRD4250B Schematics:
https://www.silabs.com/documents/public/schematic-files/efr32fg1-brd4250b-b02-schematic.pdf