| /* |
| * Copyright (c) 2017 Jean-Paul Etienne <fractalclone@gmail.com> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <init.h> |
| #include <drivers/pinmux.h> |
| #include <soc.h> |
| |
| static int hifive1_pinmux_init(struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| struct device *p = device_get_binding(CONFIG_PINMUX_SIFIVE_0_NAME); |
| |
| /* UART0 RX */ |
| pinmux_pin_set(p, 16, SIFIVE_PINMUX_IOF0); |
| |
| /* UART0 TX */ |
| pinmux_pin_set(p, 17, SIFIVE_PINMUX_IOF0); |
| |
| /* SPI1 */ |
| pinmux_pin_set(p, 2, SIFIVE_PINMUX_IOF0); /* CS0 */ |
| pinmux_pin_set(p, 3, SIFIVE_PINMUX_IOF0); /* MOSI */ |
| pinmux_pin_set(p, 4, SIFIVE_PINMUX_IOF0); /* MISO */ |
| pinmux_pin_set(p, 5, SIFIVE_PINMUX_IOF0); /* SCK */ |
| pinmux_pin_set(p, 9, SIFIVE_PINMUX_IOF0); /* CS2 */ |
| pinmux_pin_set(p, 10, SIFIVE_PINMUX_IOF0); /* CS3 */ |
| |
| #if defined(CONFIG_PWM) |
| |
| /* PWM 0 is not enabled because it conflicts with SPI 1 */ |
| |
| /* PWM 1 */ |
| /* PWM1_0 is not enabled because the driver cannot use it */ |
| pinmux_pin_set(p, 19, SIFIVE_PINMUX_IOF1); /* PWM1_1 */ |
| pinmux_pin_set(p, 21, SIFIVE_PINMUX_IOF1); /* PWM1_2 */ |
| pinmux_pin_set(p, 22, SIFIVE_PINMUX_IOF1); /* PWM1_3 */ |
| |
| /* PWM 2 */ |
| /* PWM2_0 is not enabled because the driver cannot use it */ |
| pinmux_pin_set(p, 11, SIFIVE_PINMUX_IOF1); /* PWM2_1 */ |
| pinmux_pin_set(p, 12, SIFIVE_PINMUX_IOF1); /* PWM2_2 */ |
| pinmux_pin_set(p, 13, SIFIVE_PINMUX_IOF1); /* PWM2_3 */ |
| |
| #endif /* CONFIG_PWM */ |
| |
| return 0; |
| } |
| |
| SYS_INIT(hifive1_pinmux_init, PRE_KERNEL_1, CONFIG_PINMUX_INIT_PRIORITY); |