| # Kconfig - STM32F1 PLL configuration options |
| # |
| # Copyright (c) 2019 Linaro |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| if SOC_SERIES_STM32F1X |
| |
| config CLOCK_STM32_PLL_XTPRE |
| bool "HSE to PLL /2 prescaler" |
| depends on SOC_STM32F10X_DENSITY_DEVICE && CLOCK_STM32_PLL_SRC_HSE |
| help |
| Enable this option to enable /2 prescaler on HSE to PLL clock signal |
| |
| config CLOCK_STM32_PLL_MULTIPLIER |
| int "PLL multiplier" |
| depends on CLOCK_STM32_SYSCLK_SRC_PLL |
| default 9 |
| range 2 16 if SOC_STM32F10X_DENSITY_DEVICE |
| range 4 9 if SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE |
| help |
| PLL multiplier, PLL output must not exceed 72MHz. Allowed values: |
| Density devices: 2-16 |
| Connectivity devices: 4 - 9 and 13 ( used for multiplication factor 6.5). |
| |
| config CLOCK_STM32_PLL_PREDIV1 |
| int "PREDIV1 Prescaler" |
| depends on SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE && CLOCK_STM32_SYSCLK_SRC_PLL |
| default 1 |
| range 1 16 |
| help |
| PREDIV1 is PLL clock signal prescaler, allowed values: 1 - 16. |
| |
| config CLOCK_STM32_PLL2_MULTIPLIER |
| int "PLL2 multiplier" |
| depends on SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE && CLOCK_STM32_PLL_SRC_PLL2 |
| default 8 |
| range 8 20 |
| help |
| PLL2 multiplier, allowed values: 8 - 20. 15-17-18-19 reserved |
| |
| config CLOCK_STM32_PLL2_PREDIV2 |
| int "PREDIV2 Prescaler" |
| depends on SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE && CLOCK_STM32_PLL_SRC_PLL2 |
| default 1 |
| range 1 16 |
| help |
| PREDIV2 is PLL2 prescaler, allowed values: 1 - 16. |
| |
| endif # SOC_SERIES_STM32F1X |
