| /dts-v1/; |
| |
| #include <nxp/nxp_k6x.dtsi> |
| |
| / { |
| model = "Hexiwear K64 board"; |
| compatible = "nxp,hexiwear", "nxp,k64f", "nxp,k6x"; |
| |
| aliases { |
| adc-0 = &adc0; |
| adc-1 = &adc1; |
| pwm-0 = &pwm0; |
| pwm-1 = &pwm1; |
| pwm-2 = &pwm2; |
| pwm-3 = &pwm3; |
| uart-0 = &uart0; |
| uart-4 = &uart4; |
| pinmux-a = &pinmux_a; |
| pinmux-b = &pinmux_b; |
| pinmux-c = &pinmux_c; |
| pinmux-d = &pinmux_d; |
| pinmux-e = &pinmux_e; |
| gpio-a = &gpioa; |
| gpio-b = &gpiob; |
| gpio-c = &gpioc; |
| gpio-d = &gpiod; |
| gpio-e = &gpioe; |
| i2c-0 = &i2c0; |
| i2c-1 = &i2c1; |
| i2c-2 = &i2c2; |
| led0 = &green_led; |
| led1 = &blue_led; |
| led2 = &red_led; |
| }; |
| |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,console = &uart0; |
| #ifdef CONFIG_BT |
| zephyr,bt-uart = &uart4; |
| #endif |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| red_led: led@0 { |
| gpios = <&gpioc 8 GPIO_INT_ACTIVE_LOW>; |
| label = "User LD1"; |
| }; |
| green_led: led@1 { |
| gpios = <&gpiod 0 GPIO_INT_ACTIVE_LOW>; |
| label = "User LD2"; |
| }; |
| blue_led: led@2 { |
| gpios = <&gpioc 9 GPIO_INT_ACTIVE_LOW>; |
| label = "User LD3"; |
| }; |
| }; |
| }; |
| |
| &adc0 { |
| status = "ok"; |
| }; |
| |
| &adc1 { |
| status = "ok"; |
| }; |
| |
| &pwm3 { |
| status = "ok"; |
| }; |
| |
| &i2c0 { |
| status = "ok"; |
| |
| max30101@57 { |
| compatible = "max,max30101"; |
| reg = <0x57>; |
| label = "MAX30101"; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "ok"; |
| |
| fxos8700@1e { |
| compatible = "nxp,fxos8700"; |
| reg = <0x1e>; |
| label = "FXOS8700"; |
| int1-gpios = <&gpioc 1 0>; |
| int2-gpios = <&gpiod 13 0>; |
| }; |
| |
| fxas21002@20 { |
| compatible = "nxp,fxas21002"; |
| reg = <0x20>; |
| label = "FXAS21002"; |
| int1-gpios = <&gpiod 1 0>; |
| int2-gpios = <&gpioc 18 0>; |
| }; |
| }; |
| |
| &uart0 { |
| status = "ok"; |
| current-speed = <115200>; |
| }; |
| |
| #ifdef CONFIG_BT |
| &uart4 { |
| status = "ok"; |
| current-speed = <115200>; |
| }; |
| #endif |
| |
| &flash0 { |
| /* |
| * For more information, see: |
| * http://docs.zephyrproject.org/devices/dts/flash_partitions.html |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0x00010000>; |
| read-only; |
| }; |
| |
| /* |
| * The flash starting at 0x00010000 and ending at |
| * 0x0001ffff (sectors 16-31) is reserved for use |
| * by the application. |
| */ |
| |
| slot0_partition: partition@20000 { |
| label = "image-0"; |
| reg = <0x00020000 0x00060000>; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| reg = <0x00080000 0x00060000>; |
| }; |
| scratch_partition: partition@e0000 { |
| label = "image-scratch"; |
| reg = <0x000e0000 0x00020000>; |
| }; |
| }; |
| }; |