| # Kconfig - ILI9340 display driver configuration options |
| |
| # |
| # Copyright (c) 2017 dXplore |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig ILI9340 |
| bool "ILI9340 display driver" |
| depends on SPI |
| default n |
| help |
| Enable driver for ILI9340 display driver. |
| |
| if ILI9340 |
| |
| config ILI9340_DEV_NAME |
| string "ILI9340 device name" |
| default "ILI9340" |
| |
| config ILI9340_SPI_DEV_NAME |
| string "SPI master where ILI9340 is connected" |
| default "SPI_0" |
| help |
| Specify the device name of the SPI master device to which ILI9340 is |
| connected. |
| |
| config ILI9340_SPI_SLAVE_NUMBER |
| int "SPI Slave number where ILI9340 is connected" |
| default 0 |
| help |
| The number of the slave on the host controller to which ILI9340 is |
| connected. |
| |
| config ILI9340_SPI_FREQ |
| int "SPI Frequency" |
| default 15151515 |
| help |
| Frequency to be used to communicate with the ILI9340. |
| |
| config SYS_LOG_ILI9340_LEVEL |
| int "ILI9340 Sys Log level" |
| depends on SYS_LOG |
| default 0 |
| range 0 4 |
| help |
| Sets log level for ILI9340 display driver. |
| Levels are: |
| - 0 OFF: do not write |
| - 1 ERROR: only write SYS_LOG_ERR |
| - 2 WARNING: write SYS_LOG_WRN in addition to previous level |
| - 3 INFO: write SYS_LOG_INF in addition to previous levels |
| - 4 DEBUG: write SYS_LOG_DBG in addition to previous levels |
| |
| config ILI9340_RESET_GPIO_PORT_NAME |
| string "Reset GPIO controller port name" |
| default "GPIO_0" |
| help |
| GPIO controller where the interrupt pin is attached to. |
| |
| config ILI9340_RESET_PIN |
| int "ILI9340 Reset pin" |
| default 0 |
| help |
| ILI9340 reset pin. |
| |
| config ILI9340_CMD_DATA_GPIO_PORT_NAME |
| string "Command/Data GPIO controller port name" |
| default "GPIO_0" |
| help |
| GPIO controller where the command/data pin is attached to. |
| |
| config ILI9340_CMD_DATA_PIN |
| int "ILI9340 command/data pin" |
| default 1 |
| help |
| ILI9340 command data pin. |
| |
| config ILI9340_GPIO_CS |
| bool "Use GPIO pin for chip select" |
| default n |
| help |
| Use GPIO pin for chips select. |
| |
| if ILI9340_GPIO_CS |
| |
| config ILI9340_CS_GPIO_PORT_NAME |
| string "Chip select GPIO controller port name" |
| default "GPIO_0" |
| help |
| GPIO controller where the chip select pin is attached to. |
| |
| config ILI9340_CS_GPIO_PIN |
| int "ILI9340 GPIO chip select" |
| default 1 |
| help |
| ILI9340 GPIO chip select pin. |
| |
| endif #ILI9340_GPIO_CS |
| |
| choice |
| prompt "LCD" |
| default ILI9340_LCD_ADAFRUIT_1480 |
| help |
| Specify the type of LCD connected to the ILI9340 display controller. |
| |
| config ILI9340_LCD_ADAFRUIT_1480 |
| bool |
| prompt "Adafruit 2.2\" TFT 1480" |
| |
| endchoice |
| |
| endif #ILI9340 |
