blob: e001f7d489d801f018ccca1b34ea953b871911d1 [file] [log] [blame]
/* Bosch BMI160 inertial measurement unit driver
*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*
* Datasheet:
* http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMI160-DS000-07.pdf
*/
#include <init.h>
#include <sensor.h>
#include <misc/byteorder.h>
#include <kernel.h>
#include <misc/__assert.h>
#include "bmi160.h"
struct bmi160_device_data bmi160_data;
static int bmi160_transceive(struct device *dev, u8_t reg,
bool write, void *data, size_t length)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
const struct spi_buf buf[2] = {
{
.buf = &reg,
.len = 1
},
{
.buf = data,
.len = length
}
};
const struct spi_buf_set tx = {
.buffers = buf,
.count = data ? 2 : 1
};
if (!write) {
const struct spi_buf_set rx = {
.buffers = buf,
.count = 2
};
return spi_transceive(bmi160->spi, &bmi160->spi_cfg, &tx, &rx);
}
return spi_write(bmi160->spi, &bmi160->spi_cfg, &tx);
}
int bmi160_read(struct device *dev, u8_t reg_addr, u8_t *data, u8_t len)
{
return bmi160_transceive(dev, reg_addr | BIT(7), false, data, len);
}
int bmi160_byte_read(struct device *dev, u8_t reg_addr, u8_t *byte)
{
return bmi160_transceive(dev, reg_addr | BIT(7), false, byte, 1);
}
static int bmi160_word_read(struct device *dev, u8_t reg_addr, u16_t *word)
{
if (bmi160_transceive(dev, reg_addr | BIT(7), false, word, 2) != 0) {
return -EIO;
}
*word = sys_le16_to_cpu(*word);
return 0;
}
int bmi160_byte_write(struct device *dev, u8_t reg_addr, u8_t byte)
{
return bmi160_transceive(dev, reg_addr & 0x7F, true, &byte, 1);
}
int bmi160_word_write(struct device *dev, u8_t reg_addr, u16_t word)
{
u8_t tx_word[2] = {
(u8_t)(word & 0xff),
(u8_t)(word >> 8)
};
return bmi160_transceive(dev, reg_addr & 0x7F, true, tx_word, 2);
}
int bmi160_reg_field_update(struct device *dev, u8_t reg_addr,
u8_t pos, u8_t mask, u8_t val)
{
u8_t old_val;
if (bmi160_byte_read(dev, reg_addr, &old_val) < 0) {
return -EIO;
}
return bmi160_byte_write(dev, reg_addr,
(old_val & ~mask) | ((val << pos) & mask));
}
static int bmi160_pmu_set(struct device *dev, union bmi160_pmu_status *pmu_sts)
{
struct {
u8_t cmd;
u16_t delay_us; /* values taken from page 82 */
} cmds[] = {
{BMI160_CMD_PMU_MAG | pmu_sts->mag, 350},
{BMI160_CMD_PMU_ACC | pmu_sts->acc, 3200},
{BMI160_CMD_PMU_GYR | pmu_sts->gyr, 55000}
};
size_t i;
for (i = 0; i < ARRAY_SIZE(cmds); i++) {
union bmi160_pmu_status sts;
bool pmu_set = false;
if (bmi160_byte_write(dev, BMI160_REG_CMD, cmds[i].cmd) < 0) {
return -EIO;
}
/*
* Cannot use a timer here since this is called from the
* init function and the timeouts were not initialized yet.
*/
k_busy_wait(cmds[i].delay_us);
/* make sure the PMU_STATUS was set, though */
do {
if (bmi160_byte_read(dev, BMI160_REG_PMU_STATUS,
&sts.raw) < 0) {
return -EIO;
}
if (i == 0) {
pmu_set = (pmu_sts->mag == sts.mag);
} else if (i == 1) {
pmu_set = (pmu_sts->acc == sts.acc);
} else {
pmu_set = (pmu_sts->gyr == sts.gyr);
}
} while (!pmu_set);
}
/* set the undersampling flag for accelerometer */
return bmi160_reg_field_update(dev, BMI160_REG_ACC_CONF,
BMI160_ACC_CONF_US, BMI160_ACC_CONF_US,
pmu_sts->acc != BMI160_PMU_NORMAL);
}
#if defined(CONFIG_BMI160_GYRO_ODR_RUNTIME) ||\
defined(CONFIG_BMI160_ACCEL_ODR_RUNTIME)
/*
* Output data rate map with allowed frequencies:
* freq = freq_int + freq_milli / 1000
*
* Since we don't need a finer frequency resolution than milliHz, use u16_t
* to save some flash.
*/
struct {
u16_t freq_int;
u16_t freq_milli; /* User should convert to uHz before setting the
* SENSOR_ATTR_SAMPLING_FREQUENCY attribute.
*/
} bmi160_odr_map[] = {
{0, 0 }, {0, 780}, {1, 562}, {3, 120}, {6, 250},
{12, 500}, {25, 0 }, {50, 0 }, {100, 0 }, {200, 0 },
{400, 0 }, {800, 0 }, {1600, 0 }, {3200, 0 },
};
static int bmi160_freq_to_odr_val(u16_t freq_int, u16_t freq_milli)
{
size_t i;
/* An ODR of 0 Hz is not allowed */
if (freq_int == 0 && freq_milli == 0) {
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(bmi160_odr_map); i++) {
if (freq_int < bmi160_odr_map[i].freq_int ||
(freq_int == bmi160_odr_map[i].freq_int &&
freq_milli <= bmi160_odr_map[i].freq_milli)) {
return i;
}
}
return -EINVAL;
}
#endif
#if defined(CONFIG_BMI160_ACCEL_ODR_RUNTIME)
static int bmi160_acc_odr_set(struct device *dev, u16_t freq_int,
u16_t freq_milli)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
int odr = bmi160_freq_to_odr_val(freq_int, freq_milli);
if (odr < 0) {
return odr;
}
/* some odr values cannot be set in certain power modes */
if ((bmi160->pmu_sts.acc == BMI160_PMU_NORMAL &&
odr < BMI160_ODR_25_2) ||
(bmi160->pmu_sts.acc == BMI160_PMU_LOW_POWER &&
odr < BMI160_ODR_25_32) || odr > BMI160_ODR_1600) {
return -ENOTSUP;
}
return bmi160_reg_field_update(dev, BMI160_REG_ACC_CONF,
BMI160_ACC_CONF_ODR_POS,
BMI160_ACC_CONF_ODR_MASK,
(u8_t) odr);
}
#endif
static const struct bmi160_range bmi160_acc_range_map[] = {
{2, BMI160_ACC_RANGE_2G},
{4, BMI160_ACC_RANGE_4G},
{8, BMI160_ACC_RANGE_8G},
{16, BMI160_ACC_RANGE_16G},
};
#define BMI160_ACC_RANGE_MAP_SIZE ARRAY_SIZE(bmi160_acc_range_map)
static const struct bmi160_range bmi160_gyr_range_map[] = {
{2000, BMI160_GYR_RANGE_2000DPS},
{1000, BMI160_GYR_RANGE_1000DPS},
{500, BMI160_GYR_RANGE_500DPS},
{250, BMI160_GYR_RANGE_250DPS},
{125, BMI160_GYR_RANGE_125DPS},
};
#define BMI160_GYR_RANGE_MAP_SIZE ARRAY_SIZE(bmi160_gyr_range_map)
#if defined(CONFIG_BMI160_ACCEL_RANGE_RUNTIME) ||\
defined(CONFIG_BMI160_GYRO_RANGE_RUNTIME)
static s32_t bmi160_range_to_reg_val(u16_t range,
const struct bmi160_range *range_map,
u16_t range_map_size)
{
int i;
for (i = 0; i < range_map_size; i++) {
if (range <= range_map[i].range) {
return range_map[i].reg_val;
}
}
return -EINVAL;
}
#endif
static s32_t bmi160_reg_val_to_range(u8_t reg_val,
const struct bmi160_range *range_map,
u16_t range_map_size)
{
int i;
for (i = 0; i < range_map_size; i++) {
if (reg_val == range_map[i].reg_val) {
return range_map[i].range;
}
}
return -EINVAL;
}
s32_t bmi160_acc_reg_val_to_range(u8_t reg_val)
{
return bmi160_reg_val_to_range(reg_val, bmi160_acc_range_map,
BMI160_ACC_RANGE_MAP_SIZE);
}
s32_t bmi160_gyr_reg_val_to_range(u8_t reg_val)
{
return bmi160_reg_val_to_range(reg_val, bmi160_gyr_range_map,
BMI160_GYR_RANGE_MAP_SIZE);
}
static int bmi160_do_calibration(struct device *dev, u8_t foc_conf)
{
if (bmi160_byte_write(dev, BMI160_REG_FOC_CONF, foc_conf) < 0) {
return -EIO;
}
if (bmi160_byte_write(dev, BMI160_REG_CMD, BMI160_CMD_START_FOC) < 0) {
return -EIO;
}
k_busy_wait(250000); /* calibration takes a maximum of 250ms */
return 0;
}
#if defined(CONFIG_BMI160_ACCEL_RANGE_RUNTIME)
static int bmi160_acc_range_set(struct device *dev, s32_t range)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
s32_t reg_val = bmi160_range_to_reg_val(range,
bmi160_acc_range_map,
BMI160_ACC_RANGE_MAP_SIZE);
if (reg_val < 0) {
return reg_val;
}
if (bmi160_byte_write(dev, BMI160_REG_ACC_RANGE, reg_val & 0xff) < 0) {
return -EIO;
}
bmi160->scale.acc = BMI160_ACC_SCALE(range);
return 0;
}
#endif
#if !defined(CONFIG_BMI160_ACCEL_PMU_SUSPEND)
/*
* Accelerometer offset scale, taken from pg. 79, converted to micro m/s^2:
* 3.9 * 9.80665 * 1000
*/
#define BMI160_ACC_OFS_LSB 38246
static int bmi160_acc_ofs_set(struct device *dev, enum sensor_channel chan,
const struct sensor_value *ofs)
{
u8_t reg_addr[] = {
BMI160_REG_OFFSET_ACC_X,
BMI160_REG_OFFSET_ACC_Y,
BMI160_REG_OFFSET_ACC_Z
};
int i;
s32_t ofs_u;
s8_t reg_val;
/* we need the offsets for all axis */
if (chan != SENSOR_CHAN_ACCEL_XYZ) {
return -ENOTSUP;
}
for (i = 0; i < 3; i++, ofs++) {
/* convert ofset to micro m/s^2 */
ofs_u = ofs->val1 * 1000000ULL + ofs->val2;
reg_val = ofs_u / BMI160_ACC_OFS_LSB;
if (bmi160_byte_write(dev, reg_addr[i], reg_val) < 0) {
return -EIO;
}
}
/* activate accel HW compensation */
return bmi160_reg_field_update(dev, BMI160_REG_OFFSET_EN,
BMI160_ACC_OFS_EN_POS,
BIT(BMI160_ACC_OFS_EN_POS), 1);
}
static int bmi160_acc_calibrate(struct device *dev, enum sensor_channel chan,
const struct sensor_value *xyz_calib_value)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
u8_t foc_pos[] = {
BMI160_FOC_ACC_X_POS,
BMI160_FOC_ACC_Y_POS,
BMI160_FOC_ACC_Z_POS,
};
int i;
u8_t reg_val = 0;
/* Calibration has to be done in normal mode. */
if (bmi160->pmu_sts.acc != BMI160_PMU_NORMAL) {
return -ENOTSUP;
}
/*
* Hardware calibration is done knowing the expected values on all axis.
*/
if (chan != SENSOR_CHAN_ACCEL_XYZ) {
return -ENOTSUP;
}
for (i = 0; i < 3; i++, xyz_calib_value++) {
s32_t accel_g;
u8_t accel_val;
accel_g = sensor_ms2_to_g(xyz_calib_value);
if (accel_g == 0) {
accel_val = 3;
} else if (accel_g == 1) {
accel_val = 1;
} else if (accel_g == -1) {
accel_val = 2;
} else {
accel_val = 0;
}
reg_val |= (accel_val << foc_pos[i]);
}
if (bmi160_do_calibration(dev, reg_val) < 0) {
return -EIO;
}
/* activate accel HW compensation */
return bmi160_reg_field_update(dev, BMI160_REG_OFFSET_EN,
BMI160_ACC_OFS_EN_POS,
BIT(BMI160_ACC_OFS_EN_POS), 1);
}
static int bmi160_acc_config(struct device *dev, enum sensor_channel chan,
enum sensor_attribute attr,
const struct sensor_value *val)
{
switch (attr) {
#if defined(CONFIG_BMI160_ACCEL_RANGE_RUNTIME)
case SENSOR_ATTR_FULL_SCALE:
return bmi160_acc_range_set(dev, sensor_ms2_to_g(val));
#endif
#if defined(CONFIG_BMI160_ACCEL_ODR_RUNTIME)
case SENSOR_ATTR_SAMPLING_FREQUENCY:
return bmi160_acc_odr_set(dev, val->val1, val->val2 / 1000);
#endif
case SENSOR_ATTR_OFFSET:
return bmi160_acc_ofs_set(dev, chan, val);
case SENSOR_ATTR_CALIB_TARGET:
return bmi160_acc_calibrate(dev, chan, val);
#if defined(CONFIG_BMI160_TRIGGER)
case SENSOR_ATTR_SLOPE_TH:
case SENSOR_ATTR_SLOPE_DUR:
return bmi160_acc_slope_config(dev, attr, val);
#endif
default:
SYS_LOG_DBG("Accel attribute not supported.");
return -ENOTSUP;
}
return 0;
}
#endif /* !defined(CONFIG_BMI160_ACCEL_PMU_SUSPEND) */
#if defined(CONFIG_BMI160_GYRO_ODR_RUNTIME)
static int bmi160_gyr_odr_set(struct device *dev, u16_t freq_int,
u16_t freq_milli)
{
int odr = bmi160_freq_to_odr_val(freq_int, freq_milli);
if (odr < 0) {
return odr;
}
if (odr < BMI160_ODR_25 || odr > BMI160_ODR_3200) {
return -ENOTSUP;
}
return bmi160_reg_field_update(dev, BMI160_REG_GYR_CONF,
BMI160_GYR_CONF_ODR_POS,
BMI160_GYR_CONF_ODR_MASK,
(u8_t) odr);
}
#endif
#if defined(CONFIG_BMI160_GYRO_RANGE_RUNTIME)
static int bmi160_gyr_range_set(struct device *dev, u16_t range)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
s32_t reg_val = bmi160_range_to_reg_val(range,
bmi160_gyr_range_map,
BMI160_GYR_RANGE_MAP_SIZE);
if (reg_val < 0) {
return reg_val;
}
if (bmi160_byte_write(dev, BMI160_REG_GYR_RANGE, reg_val) < 0) {
return -EIO;
}
bmi160->scale.gyr = BMI160_GYR_SCALE(range);
return 0;
}
#endif
#if !defined(CONFIG_BMI160_GYRO_PMU_SUSPEND)
/*
* Gyro offset scale, taken from pg. 79, converted to micro rad/s:
* 0.061 * (pi / 180) * 1000000, where pi = 3.141592
*/
#define BMI160_GYR_OFS_LSB 1065
static int bmi160_gyr_ofs_set(struct device *dev, enum sensor_channel chan,
const struct sensor_value *ofs)
{
struct {
u8_t lsb_addr;
u8_t msb_pos;
} ofs_desc[] = {
{BMI160_REG_OFFSET_GYR_X, BMI160_GYR_MSB_OFS_X_POS},
{BMI160_REG_OFFSET_GYR_Y, BMI160_GYR_MSB_OFS_Y_POS},
{BMI160_REG_OFFSET_GYR_Z, BMI160_GYR_MSB_OFS_Z_POS},
};
int i;
s32_t ofs_u;
s16_t val;
/* we need the offsets for all axis */
if (chan != SENSOR_CHAN_GYRO_XYZ) {
return -ENOTSUP;
}
for (i = 0; i < 3; i++, ofs++) {
/* convert offset to micro rad/s */
ofs_u = ofs->val1 * 1000000ULL + ofs->val2;
val = ofs_u / BMI160_GYR_OFS_LSB;
/*
* The gyro offset is a 10 bit two-complement value. Make sure
* the passed value is within limits.
*/
if (val < -512 || val > 512) {
return -EINVAL;
}
/* write the LSB */
if (bmi160_byte_write(dev, ofs_desc[i].lsb_addr,
val & 0xff) < 0) {
return -EIO;
}
/* write the MSB */
if (bmi160_reg_field_update(dev, BMI160_REG_OFFSET_EN,
ofs_desc[i].msb_pos,
0x3 << ofs_desc[i].msb_pos,
(val >> 8) & 0x3) < 0) {
return -EIO;
}
}
/* activate gyro HW compensation */
return bmi160_reg_field_update(dev, BMI160_REG_OFFSET_EN,
BMI160_GYR_OFS_EN_POS,
BIT(BMI160_GYR_OFS_EN_POS), 1);
}
static int bmi160_gyr_calibrate(struct device *dev, enum sensor_channel chan)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
ARG_UNUSED(chan);
/* Calibration has to be done in normal mode. */
if (bmi160->pmu_sts.gyr != BMI160_PMU_NORMAL) {
return -ENOTSUP;
}
if (bmi160_do_calibration(dev, BIT(BMI160_FOC_GYR_EN_POS)) < 0) {
return -EIO;
}
/* activate gyro HW compensation */
return bmi160_reg_field_update(dev, BMI160_REG_OFFSET_EN,
BMI160_GYR_OFS_EN_POS,
BIT(BMI160_GYR_OFS_EN_POS), 1);
}
static int bmi160_gyr_config(struct device *dev, enum sensor_channel chan,
enum sensor_attribute attr,
const struct sensor_value *val)
{
switch (attr) {
#if defined(CONFIG_BMI160_GYRO_RANGE_RUNTIME)
case SENSOR_ATTR_FULL_SCALE:
return bmi160_gyr_range_set(dev, sensor_rad_to_degrees(val));
#endif
#if defined(CONFIG_BMI160_GYRO_ODR_RUNTIME)
case SENSOR_ATTR_SAMPLING_FREQUENCY:
return bmi160_gyr_odr_set(dev, val->val1, val->val2 / 1000);
#endif
case SENSOR_ATTR_OFFSET:
return bmi160_gyr_ofs_set(dev, chan, val);
case SENSOR_ATTR_CALIB_TARGET:
return bmi160_gyr_calibrate(dev, chan);
default:
SYS_LOG_DBG("Gyro attribute not supported.");
return -ENOTSUP;
}
return 0;
}
#endif /* !defined(CONFIG_BMI160_GYRO_PMU_SUSPEND) */
static int bmi160_attr_set(struct device *dev, enum sensor_channel chan,
enum sensor_attribute attr, const struct sensor_value *val)
{
switch (chan) {
#if !defined(CONFIG_BMI160_GYRO_PMU_SUSPEND)
case SENSOR_CHAN_GYRO_X:
case SENSOR_CHAN_GYRO_Y:
case SENSOR_CHAN_GYRO_Z:
case SENSOR_CHAN_GYRO_XYZ:
return bmi160_gyr_config(dev, chan, attr, val);
#endif
#if !defined(CONFIG_BMI160_ACCEL_PMU_SUSPEND)
case SENSOR_CHAN_ACCEL_X:
case SENSOR_CHAN_ACCEL_Y:
case SENSOR_CHAN_ACCEL_Z:
case SENSOR_CHAN_ACCEL_XYZ:
return bmi160_acc_config(dev, chan, attr, val);
#endif
default:
SYS_LOG_DBG("attr_set() not supported on this channel.");
return -ENOTSUP;
}
return 0;
}
#if defined(CONFIG_BMI160_GYRO_PMU_SUSPEND)
# define BMI160_SAMPLE_BURST_READ_ADDR BMI160_REG_DATA_ACC_X
# define BMI160_DATA_READY_BIT_MASK (1 << 7)
#else
# define BMI160_SAMPLE_BURST_READ_ADDR BMI160_REG_DATA_GYR_X
# define BMI160_DATA_READY_BIT_MASK (1 << 6)
#endif
static int bmi160_sample_fetch(struct device *dev, enum sensor_channel chan)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
size_t i;
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL);
bmi160->sample.raw[0] = 0;
while ((bmi160->sample.raw[0] & BMI160_DATA_READY_BIT_MASK) == 0) {
if (bmi160_transceive(dev, BMI160_REG_STATUS | (1 << 7), false,
bmi160->sample.raw, 1) < 0) {
return -EIO;
}
}
if (bmi160_transceive(dev, BMI160_SAMPLE_BURST_READ_ADDR | (1 << 7),
false, bmi160->sample.raw, BMI160_BUF_SIZE) < 0) {
return -EIO;
}
/* convert samples to cpu endianness */
for (i = 0; i < BMI160_SAMPLE_SIZE; i += 2) {
u16_t *sample =
(u16_t *) &bmi160->sample.raw[i];
*sample = sys_le16_to_cpu(*sample);
}
return 0;
}
static void bmi160_to_fixed_point(s16_t raw_val, u16_t scale,
struct sensor_value *val)
{
s32_t converted_val;
/*
* maximum converted value we can get is: max(raw_val) * max(scale)
* max(raw_val) = +/- 2^15
* max(scale) = 4785
* max(converted_val) = 156794880 which is less than 2^31
*/
converted_val = raw_val * scale;
val->val1 = converted_val / 1000000;
val->val2 = converted_val % 1000000;
}
static void bmi160_channel_convert(enum sensor_channel chan,
u16_t scale,
u16_t *raw_xyz,
struct sensor_value *val)
{
int i;
u8_t ofs_start, ofs_stop;
switch (chan) {
case SENSOR_CHAN_ACCEL_X:
case SENSOR_CHAN_GYRO_X:
ofs_start = ofs_stop = 0;
break;
case SENSOR_CHAN_ACCEL_Y:
case SENSOR_CHAN_GYRO_Y:
ofs_start = ofs_stop = 1;
break;
case SENSOR_CHAN_ACCEL_Z:
case SENSOR_CHAN_GYRO_Z:
ofs_start = ofs_stop = 2;
break;
default:
ofs_start = 0; ofs_stop = 2;
break;
}
for (i = ofs_start; i <= ofs_stop ; i++, val++) {
bmi160_to_fixed_point(raw_xyz[i], scale, val);
}
}
#if !defined(CONFIG_BMI160_GYRO_PMU_SUSPEND)
static inline void bmi160_gyr_channel_get(struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
bmi160_channel_convert(chan, bmi160->scale.gyr,
bmi160->sample.gyr, val);
}
#endif
#if !defined(CONFIG_BMI160_ACCEL_PMU_SUSPEND)
static inline void bmi160_acc_channel_get(struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
bmi160_channel_convert(chan, bmi160->scale.acc,
bmi160->sample.acc, val);
}
#endif
static int bmi160_temp_channel_get(struct device *dev, struct sensor_value *val)
{
u16_t temp_raw = 0;
s32_t temp_micro = 0;
struct bmi160_device_data *bmi160 = dev->driver_data;
if (bmi160->pmu_sts.raw == 0) {
return -EINVAL;
}
if (bmi160_word_read(dev, BMI160_REG_TEMPERATURE0, &temp_raw) < 0) {
return -EIO;
}
/* the scale is 1/2^9/LSB = 1953 micro degrees */
temp_micro = BMI160_TEMP_OFFSET * 1000000ULL + temp_raw * 1953ULL;
val->val1 = temp_micro / 1000000ULL;
val->val2 = temp_micro % 1000000ULL;
return 0;
}
static int bmi160_channel_get(struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
switch (chan) {
#if !defined(CONFIG_BMI160_GYRO_PMU_SUSPEND)
case SENSOR_CHAN_GYRO_X:
case SENSOR_CHAN_GYRO_Y:
case SENSOR_CHAN_GYRO_Z:
case SENSOR_CHAN_GYRO_XYZ:
bmi160_gyr_channel_get(dev, chan, val);
return 0;
#endif
#if !defined(CONFIG_BMI160_ACCEL_PMU_SUSPEND)
case SENSOR_CHAN_ACCEL_X:
case SENSOR_CHAN_ACCEL_Y:
case SENSOR_CHAN_ACCEL_Z:
case SENSOR_CHAN_ACCEL_XYZ:
bmi160_acc_channel_get(dev, chan, val);
return 0;
#endif
case SENSOR_CHAN_DIE_TEMP:
return bmi160_temp_channel_get(dev, val);
default:
SYS_LOG_DBG("Channel not supported.");
return -ENOTSUP;
}
return 0;
}
static const struct sensor_driver_api bmi160_api = {
.attr_set = bmi160_attr_set,
#ifdef CONFIG_BMI160_TRIGGER
.trigger_set = bmi160_trigger_set,
#endif
.sample_fetch = bmi160_sample_fetch,
.channel_get = bmi160_channel_get,
};
int bmi160_init(struct device *dev)
{
struct bmi160_device_data *bmi160 = dev->driver_data;
u8_t val = 0;
s32_t acc_range, gyr_range;
bmi160->spi = device_get_binding(CONFIG_BMI160_SPI_PORT_NAME);
if (!bmi160->spi) {
SYS_LOG_DBG("SPI master controller not found: %d.",
CONFIG_BMI160_SPI_PORT_NAME);
return -EINVAL;
}
bmi160->spi_cfg.operation = SPI_WORD_SET(8);
bmi160->spi_cfg.frequency = CONFIG_BMI160_SPI_BUS_FREQ;
bmi160->spi_cfg.slave = CONFIG_BMI160_SLAVE;
/* reboot the chip */
if (bmi160_byte_write(dev, BMI160_REG_CMD, BMI160_CMD_SOFT_RESET) < 0) {
SYS_LOG_DBG("Cannot reboot chip.");
return -EIO;
}
k_busy_wait(1000);
/* do a dummy read from 0x7F to activate SPI */
if (bmi160_byte_read(dev, 0x7F, &val) < 0) {
SYS_LOG_DBG("Cannot read from 0x7F..");
return -EIO;
}
k_busy_wait(100);
if (bmi160_byte_read(dev, BMI160_REG_CHIPID, &val) < 0) {
SYS_LOG_DBG("Failed to read chip id.");
return -EIO;
}
if (val != BMI160_CHIP_ID) {
SYS_LOG_DBG("Unsupported chip detected (0x%x)!", val);
return -ENODEV;
}
/* set default PMU for gyro, accelerometer */
bmi160->pmu_sts.gyr = BMI160_DEFAULT_PMU_GYR;
bmi160->pmu_sts.acc = BMI160_DEFAULT_PMU_ACC;
/* compass not supported, yet */
bmi160->pmu_sts.mag = BMI160_PMU_SUSPEND;
/*
* The next command will take around 100ms (contains some necessary busy
* waits), but we cannot do it in a separate thread since we need to
* guarantee the BMI is up and running, before the app's main() is
* called.
*/
if (bmi160_pmu_set(dev, &bmi160->pmu_sts) < 0) {
SYS_LOG_DBG("Failed to set power mode.");
return -EIO;
}
/* set accelerometer default range */
if (bmi160_byte_write(dev, BMI160_REG_ACC_RANGE,
BMI160_DEFAULT_RANGE_ACC) < 0) {
SYS_LOG_DBG("Cannot set default range for accelerometer.");
return -EIO;
}
acc_range = bmi160_acc_reg_val_to_range(BMI160_DEFAULT_RANGE_ACC);
bmi160->scale.acc = BMI160_ACC_SCALE(acc_range);
/* set gyro default range */
if (bmi160_byte_write(dev, BMI160_REG_GYR_RANGE,
BMI160_DEFAULT_RANGE_GYR) < 0) {
SYS_LOG_DBG("Cannot set default range for gyroscope.");
return -EIO;
}
gyr_range = bmi160_gyr_reg_val_to_range(BMI160_DEFAULT_RANGE_GYR);
bmi160->scale.gyr = BMI160_GYR_SCALE(gyr_range);
if (bmi160_reg_field_update(dev, BMI160_REG_ACC_CONF,
BMI160_ACC_CONF_ODR_POS,
BMI160_ACC_CONF_ODR_MASK,
BMI160_DEFAULT_ODR_ACC) < 0) {
SYS_LOG_DBG("Failed to set accel's default ODR.");
return -EIO;
}
if (bmi160_reg_field_update(dev, BMI160_REG_GYR_CONF,
BMI160_GYR_CONF_ODR_POS,
BMI160_GYR_CONF_ODR_MASK,
BMI160_DEFAULT_ODR_GYR) < 0) {
SYS_LOG_DBG("Failed to set gyro's default ODR.");
return -EIO;
}
#ifdef CONFIG_BMI160_TRIGGER
if (bmi160_trigger_mode_init(dev) < 0) {
SYS_LOG_DBG("Cannot set up trigger mode.");
return -EINVAL;
}
#endif
dev->driver_api = &bmi160_api;
return 0;
}
const struct bmi160_device_config bmi160_config = {
#if defined(CONFIG_BMI160_TRIGGER)
.gpio_port = CONFIG_BMI160_GPIO_DEV_NAME,
.int_pin = CONFIG_BMI160_GPIO_PIN_NUM,
#endif
};
DEVICE_INIT(bmi160, CONFIG_BMI160_NAME, bmi160_init, &bmi160_data,
&bmi160_config, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY);