| CONFIG_NETWORKING=y |
| CONFIG_NET_LOG=y |
| CONFIG_NET_IPV6=y |
| CONFIG_NET_IPV4=y |
| CONFIG_NET_DHCPV4=n |
| CONFIG_NET_UDP=y |
| CONFIG_NET_TCP=y |
| CONFIG_NET_STATISTICS=y |
| |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| |
| CONFIG_NET_PKT_RX_COUNT=32 |
| CONFIG_NET_PKT_TX_COUNT=32 |
| CONFIG_NET_BUF_RX_COUNT=32 |
| CONFIG_NET_BUF_TX_COUNT=32 |
| CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=5 |
| CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=1 |
| CONFIG_NET_MAX_CONTEXTS=10 |
| |
| CONFIG_INIT_STACKS=y |
| CONFIG_PRINTK=y |
| CONFIG_NET_SHELL=y |
| |
| # Ethernet is needed for VLAN |
| CONFIG_NET_L2_ETHERNET=y |
| |
| CONFIG_NET_APP_SERVER=y |
| CONFIG_NET_APP_NEED_IPV6=y |
| CONFIG_NET_APP_NEED_IPV4=y |
| CONFIG_NET_APP_SETTINGS=y |
| |
| # First ethernet interface will use these settings |
| CONFIG_NET_APP_MY_IPV6_ADDR="2001:db8:100::1" |
| CONFIG_NET_APP_PEER_IPV6_ADDR="2001:db8:100::2" |
| # TEST-NET-2 from RFC 5737 |
| CONFIG_NET_APP_MY_IPV4_ADDR="198.51.100.1" |
| CONFIG_NET_APP_PEER_IPV4_ADDR="198.51.100.2" |
| # VLAN tag for the first interface |
| CONFIG_NET_VLAN_SAMPLE_TAG=100 |
| |
| # Settings for the second network interface |
| CONFIG_SAMPLE_IPV6_ADDR_2="2001:db8:200::1" |
| CONFIG_NET_VLAN_SAMPLE_TAG_2=200 |
| # TEST-NET-3 from RFC 5737 |
| CONFIG_SAMPLE_IPV4_ADDR_2="203.0.113.1" |
| |
| # Logging |
| CONFIG_SYS_LOG_SHOW_COLOR=y |
| CONFIG_SYS_LOG_NET_LEVEL=4 |
| |
| CONFIG_NET_DEBUG_NET_PKT=y |
| CONFIG_NET_DEBUG_L2_ETHERNET=n |
| CONFIG_NET_DEBUG_ARP=n |
| CONFIG_NET_DEBUG_IF=n |
| |
| # VLAN settings. Note that currently SLIP only supports one VLAN tag, |
| # and that is enforced by Kconfig file. |
| CONFIG_NET_VLAN=y |
| CONFIG_NET_VLAN_COUNT=2 |
| |
| # Settings for native_posix ethernet driver (if compiled for that board) |
| CONFIG_ETH_NATIVE_POSIX=y |
