| /* |
| * Copyright (c) 2016 BayLibre, SAS |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define SYS_LOG_LEVEL CONFIG_SYS_LOG_SPI_LEVEL |
| #include <logging/sys_log.h> |
| |
| #include <misc/util.h> |
| #include <kernel.h> |
| #include <board.h> |
| #include <errno.h> |
| #include <spi.h> |
| #include <toolchain.h> |
| |
| #include <clock_control/stm32_clock_control.h> |
| #include <clock_control.h> |
| |
| #include "spi_ll_stm32.h" |
| |
| #define CONFIG_CFG(cfg) \ |
| ((const struct spi_stm32_config * const)(cfg)->dev->config->config_info) |
| |
| #define CONFIG_DATA(cfg) \ |
| ((struct spi_stm32_data * const)(cfg)->dev->driver_data) |
| |
| #ifdef LL_SPI_SR_UDR |
| #define SPI_STM32_ERR_MSK (LL_SPI_SR_UDR | LL_SPI_SR_CRCERR | LL_SPI_SR_MODF | \ |
| LL_SPI_SR_OVR | LL_SPI_SR_FRE) |
| #else |
| #define SPI_STM32_ERR_MSK (LL_SPI_SR_CRCERR | LL_SPI_SR_MODF | \ |
| LL_SPI_SR_OVR | LL_SPI_SR_FRE) |
| #endif |
| |
| /* Value to shift out when no application data needs transmitting. */ |
| #define SPI_STM32_TX_NOP 0x00 |
| |
| static bool spi_stm32_transfer_ongoing(struct spi_stm32_data *data) |
| { |
| return spi_context_tx_on(&data->ctx) || spi_context_rx_on(&data->ctx); |
| } |
| |
| static int spi_stm32_get_err(SPI_TypeDef *spi) |
| { |
| u32_t sr = LL_SPI_ReadReg(spi, SR); |
| |
| return (int)(sr & SPI_STM32_ERR_MSK); |
| } |
| |
| static inline u16_t spi_stm32_next_tx(struct spi_stm32_data *data) |
| { |
| u16_t tx_frame; |
| |
| if (spi_context_tx_on(&data->ctx)) { |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| tx_frame = UNALIGNED_GET((u8_t *)(data->ctx.tx_buf)); |
| } else { |
| tx_frame = UNALIGNED_GET((u16_t *)(data->ctx.tx_buf)); |
| } |
| } else { |
| tx_frame = SPI_STM32_TX_NOP; |
| } |
| return tx_frame; |
| } |
| |
| /* Shift a SPI frame as master. */ |
| static void spi_stm32_shift_m(SPI_TypeDef *spi, struct spi_stm32_data *data) |
| { |
| u16_t tx_frame; |
| u16_t rx_frame; |
| |
| tx_frame = spi_stm32_next_tx(data); |
| while (!LL_SPI_IsActiveFlag_TXE(spi)) { |
| /* NOP */ |
| } |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| LL_SPI_TransmitData8(spi, tx_frame); |
| /* The update is ignored if TX is off. */ |
| spi_context_update_tx(&data->ctx, 1, 1); |
| } else { |
| LL_SPI_TransmitData16(spi, tx_frame); |
| /* The update is ignored if TX is off. */ |
| spi_context_update_tx(&data->ctx, 2, 1); |
| } |
| |
| while (!LL_SPI_IsActiveFlag_RXNE(spi)) { |
| /* NOP */ |
| } |
| |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| rx_frame = LL_SPI_ReceiveData8(spi); |
| if (spi_context_rx_on(&data->ctx)) { |
| UNALIGNED_PUT(rx_frame, (u8_t *)data->ctx.rx_buf); |
| spi_context_update_rx(&data->ctx, 1, 1); |
| } |
| } else { |
| rx_frame = LL_SPI_ReceiveData16(spi); |
| if (spi_context_rx_on(&data->ctx)) { |
| UNALIGNED_PUT(rx_frame, (u16_t *)data->ctx.rx_buf); |
| spi_context_update_rx(&data->ctx, 2, 1); |
| } |
| } |
| } |
| |
| /* Shift a SPI frame as slave. */ |
| static void spi_stm32_shift_s(SPI_TypeDef *spi, struct spi_stm32_data *data) |
| { |
| u16_t tx_frame; |
| u16_t rx_frame; |
| |
| tx_frame = spi_stm32_next_tx(data); |
| if (LL_SPI_IsActiveFlag_TXE(spi)) { |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| LL_SPI_TransmitData8(spi, tx_frame); |
| /* The update is ignored if TX is off. */ |
| spi_context_update_tx(&data->ctx, 1, 1); |
| } else { |
| LL_SPI_TransmitData16(spi, tx_frame); |
| /* The update is ignored if TX is off. */ |
| spi_context_update_tx(&data->ctx, 2, 1); |
| } |
| } |
| |
| if (LL_SPI_IsActiveFlag_RXNE(spi)) { |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| rx_frame = LL_SPI_ReceiveData8(spi); |
| if (spi_context_rx_on(&data->ctx)) { |
| UNALIGNED_PUT(rx_frame, |
| (u8_t *)data->ctx.rx_buf); |
| spi_context_update_rx(&data->ctx, 1, 1); |
| } |
| } else { |
| rx_frame = LL_SPI_ReceiveData16(spi); |
| if (spi_context_rx_on(&data->ctx)) { |
| UNALIGNED_PUT(rx_frame, |
| (u16_t *)data->ctx.rx_buf); |
| spi_context_update_rx(&data->ctx, 2, 1); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Without a FIFO, we can only shift out one frame's worth of SPI |
| * data, and read the response back. |
| * |
| * TODO: support 16-bit data frames. |
| */ |
| static int spi_stm32_shift_frames(SPI_TypeDef *spi, struct spi_stm32_data *data) |
| { |
| u16_t operation = data->ctx.config->operation; |
| |
| if (SPI_OP_MODE_GET(operation) == SPI_OP_MODE_MASTER) { |
| spi_stm32_shift_m(spi, data); |
| } else { |
| spi_stm32_shift_s(spi, data); |
| } |
| |
| return spi_stm32_get_err(spi); |
| } |
| |
| static void spi_stm32_complete(struct spi_stm32_data *data, SPI_TypeDef *spi, |
| int status) |
| { |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| LL_SPI_DisableIT_TXE(spi); |
| LL_SPI_DisableIT_RXNE(spi); |
| LL_SPI_DisableIT_ERR(spi); |
| #endif |
| |
| spi_context_cs_control(&data->ctx, false); |
| |
| #if defined(CONFIG_SPI_STM32_HAS_FIFO) |
| /* Flush RX buffer */ |
| while (LL_SPI_IsActiveFlag_RXNE(spi)) { |
| (void) LL_SPI_ReceiveData8(spi); |
| } |
| #endif |
| |
| if (LL_SPI_GetMode(spi) == LL_SPI_MODE_MASTER) { |
| while (LL_SPI_IsActiveFlag_BSY(spi)) { |
| /* NOP */ |
| } |
| } |
| |
| LL_SPI_Disable(spi); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| spi_context_complete(&data->ctx, status); |
| #endif |
| } |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_isr(void *arg) |
| { |
| struct device * const dev = (struct device *) arg; |
| const struct spi_stm32_config *cfg = dev->config->config_info; |
| struct spi_stm32_data *data = dev->driver_data; |
| SPI_TypeDef *spi = cfg->spi; |
| int err; |
| |
| err = spi_stm32_get_err(spi); |
| if (err) { |
| spi_stm32_complete(data, spi, err); |
| return; |
| } |
| |
| if (spi_stm32_transfer_ongoing(data)) { |
| err = spi_stm32_shift_frames(spi, data); |
| } |
| |
| if (err || !spi_stm32_transfer_ongoing(data)) { |
| spi_stm32_complete(data, spi, err); |
| } |
| } |
| #endif |
| |
| static int spi_stm32_configure(struct spi_config *config) |
| { |
| const struct spi_stm32_config *cfg = CONFIG_CFG(config); |
| struct spi_stm32_data *data = CONFIG_DATA(config); |
| const u32_t scaler[] = { |
| LL_SPI_BAUDRATEPRESCALER_DIV2, |
| LL_SPI_BAUDRATEPRESCALER_DIV4, |
| LL_SPI_BAUDRATEPRESCALER_DIV8, |
| LL_SPI_BAUDRATEPRESCALER_DIV16, |
| LL_SPI_BAUDRATEPRESCALER_DIV32, |
| LL_SPI_BAUDRATEPRESCALER_DIV64, |
| LL_SPI_BAUDRATEPRESCALER_DIV128, |
| LL_SPI_BAUDRATEPRESCALER_DIV256 |
| }; |
| SPI_TypeDef *spi = cfg->spi; |
| u32_t clock; |
| int br; |
| |
| if (spi_context_configured(&data->ctx, config)) { |
| /* Nothing to do */ |
| return 0; |
| } |
| |
| if ((SPI_WORD_SIZE_GET(config->operation) != 8) |
| && (SPI_WORD_SIZE_GET(config->operation) != 16)) { |
| return -ENOTSUP; |
| } |
| |
| clock_control_get_rate(device_get_binding(STM32_CLOCK_CONTROL_NAME), |
| (clock_control_subsys_t) &cfg->pclken, &clock); |
| |
| for (br = 1 ; br <= ARRAY_SIZE(scaler) ; ++br) { |
| u32_t clk = clock >> br; |
| |
| if (clk <= config->frequency) { |
| break; |
| } |
| } |
| |
| if (br > ARRAY_SIZE(scaler)) { |
| SYS_LOG_ERR("Unsupported frequency %uHz, max %uHz, min %uHz", |
| config->frequency, |
| clock >> 1, |
| clock >> ARRAY_SIZE(scaler)); |
| return -EINVAL; |
| } |
| |
| LL_SPI_Disable(spi); |
| LL_SPI_SetBaudRatePrescaler(spi, scaler[br - 1]); |
| |
| if (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) { |
| LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_HIGH); |
| } else { |
| LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_LOW); |
| } |
| |
| if (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) { |
| LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_2EDGE); |
| } else { |
| LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_1EDGE); |
| } |
| |
| LL_SPI_SetTransferDirection(spi, LL_SPI_FULL_DUPLEX); |
| |
| if (config->operation & SPI_TRANSFER_LSB) { |
| LL_SPI_SetTransferBitOrder(spi, LL_SPI_LSB_FIRST); |
| } else { |
| LL_SPI_SetTransferBitOrder(spi, LL_SPI_MSB_FIRST); |
| } |
| |
| LL_SPI_DisableCRC(spi); |
| |
| if (config->operation & SPI_OP_MODE_SLAVE) { |
| LL_SPI_SetMode(spi, LL_SPI_MODE_SLAVE); |
| } else { |
| LL_SPI_SetMode(spi, LL_SPI_MODE_MASTER); |
| } |
| |
| if (config->cs) { |
| LL_SPI_SetNSSMode(spi, LL_SPI_NSS_SOFT); |
| } else { |
| if (config->operation & SPI_OP_MODE_SLAVE) { |
| LL_SPI_SetNSSMode(spi, LL_SPI_NSS_HARD_INPUT); |
| } else { |
| LL_SPI_SetNSSMode(spi, LL_SPI_NSS_HARD_OUTPUT); |
| } |
| } |
| |
| if (SPI_WORD_SIZE_GET(config->operation) == 8) { |
| LL_SPI_SetDataWidth(spi, LL_SPI_DATAWIDTH_8BIT); |
| } else { |
| LL_SPI_SetDataWidth(spi, LL_SPI_DATAWIDTH_16BIT); |
| } |
| |
| #if defined(CONFIG_SPI_STM32_HAS_FIFO) |
| LL_SPI_SetRxFIFOThreshold(spi, LL_SPI_RX_FIFO_TH_QUARTER); |
| #endif |
| LL_SPI_SetStandard(spi, LL_SPI_PROTOCOL_MOTOROLA); |
| |
| /* At this point, it's mandatory to set this on the context! */ |
| data->ctx.config = config; |
| |
| spi_context_cs_configure(&data->ctx); |
| |
| SYS_LOG_DBG("Installed config %p: freq %uHz (div = %u)," |
| " mode %u/%u/%u, slave %u", |
| config, clock >> br, 1 << br, |
| (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & SPI_MODE_LOOP) ? 1 : 0, |
| config->slave); |
| |
| return 0; |
| } |
| |
| static int spi_stm32_release(struct spi_config *config) |
| { |
| struct spi_stm32_data *data = CONFIG_DATA(config); |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static int transceive(struct spi_config *config, |
| const struct spi_buf *tx_bufs, u32_t tx_count, |
| struct spi_buf *rx_bufs, u32_t rx_count, |
| bool asynchronous, struct k_poll_signal *signal) |
| { |
| const struct spi_stm32_config *cfg = CONFIG_CFG(config); |
| struct spi_stm32_data *data = CONFIG_DATA(config); |
| SPI_TypeDef *spi = cfg->spi; |
| int ret; |
| |
| if (!tx_count && !rx_count) { |
| return 0; |
| } |
| |
| #ifndef CONFIG_SPI_STM32_INTERRUPT |
| if (asynchronous) { |
| return -ENOTSUP; |
| } |
| #endif |
| |
| spi_context_lock(&data->ctx, asynchronous, signal); |
| |
| ret = spi_stm32_configure(config); |
| if (ret) { |
| return ret; |
| } |
| |
| /* Set buffers info */ |
| spi_context_buffers_setup(&data->ctx, tx_bufs, tx_count, |
| rx_bufs, rx_count, 1); |
| |
| #if defined(CONFIG_SPI_STM32_HAS_FIFO) |
| /* Flush RX buffer */ |
| while (LL_SPI_IsActiveFlag_RXNE(spi)) { |
| (void) LL_SPI_ReceiveData8(spi); |
| } |
| #endif |
| |
| LL_SPI_Enable(spi); |
| |
| /* This is turned off in spi_stm32_complete(). */ |
| spi_context_cs_control(&data->ctx, true); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| LL_SPI_EnableIT_ERR(spi); |
| |
| if (rx_bufs) { |
| LL_SPI_EnableIT_RXNE(spi); |
| } |
| |
| LL_SPI_EnableIT_TXE(spi); |
| |
| ret = spi_context_wait_for_completion(&data->ctx); |
| #else |
| do { |
| ret = spi_stm32_shift_frames(spi, data); |
| } while (!ret && spi_stm32_transfer_ongoing(data)); |
| |
| spi_stm32_complete(data, spi, ret); |
| #endif |
| |
| spi_context_release(&data->ctx, ret); |
| |
| if (ret) { |
| SYS_LOG_ERR("error mask 0x%x", ret); |
| } |
| |
| return ret ? -EIO : 0; |
| } |
| |
| static int spi_stm32_transceive(struct spi_config *config, |
| const struct spi_buf *tx_bufs, u32_t tx_count, |
| struct spi_buf *rx_bufs, u32_t rx_count) |
| { |
| return transceive(config, tx_bufs, tx_count, |
| rx_bufs, rx_count, false, NULL); |
| } |
| |
| #ifdef CONFIG_POLL |
| static int spi_stm32_transceive_async(struct spi_config *config, |
| const struct spi_buf *tx_bufs, |
| size_t tx_count, |
| struct spi_buf *rx_bufs, |
| size_t rx_count, |
| struct k_poll_signal *async) |
| { |
| return transceive(config, tx_bufs, tx_count, |
| rx_bufs, rx_count, true, async); |
| } |
| #endif /* CONFIG_POLL */ |
| |
| static const struct spi_driver_api api_funcs = { |
| .transceive = spi_stm32_transceive, |
| #ifdef CONFIG_POLL |
| .transceive_async = spi_stm32_transceive_async, |
| #endif |
| .release = spi_stm32_release, |
| }; |
| |
| static int spi_stm32_init(struct device *dev) |
| { |
| struct spi_stm32_data *data __attribute__((unused)) = dev->driver_data; |
| const struct spi_stm32_config *cfg = dev->config->config_info; |
| |
| __ASSERT_NO_MSG(device_get_binding(STM32_CLOCK_CONTROL_NAME)); |
| |
| clock_control_on(device_get_binding(STM32_CLOCK_CONTROL_NAME), |
| (clock_control_subsys_t) &cfg->pclken); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| cfg->irq_config(dev); |
| #endif |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPI_1 |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_1(struct device *port); |
| #endif |
| |
| static const struct spi_stm32_config spi_stm32_cfg_1 = { |
| .spi = (SPI_TypeDef *) CONFIG_SPI_1_BASE_ADDRESS, |
| .pclken = { |
| #ifdef CONFIG_SOC_SERIES_STM32F0X |
| .enr = LL_APB1_GRP2_PERIPH_SPI1, |
| .bus = STM32_CLOCK_BUS_APB1_2 |
| #else |
| .enr = LL_APB2_GRP1_PERIPH_SPI1, |
| .bus = STM32_CLOCK_BUS_APB2 |
| #endif |
| }, |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| .irq_config = spi_stm32_irq_config_func_1, |
| #endif |
| }; |
| |
| static struct spi_stm32_data spi_stm32_dev_data_1 = { |
| SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_1, ctx), |
| SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_1, ctx), |
| }; |
| |
| DEVICE_AND_API_INIT(spi_stm32_1, CONFIG_SPI_1_NAME, &spi_stm32_init, |
| &spi_stm32_dev_data_1, &spi_stm32_cfg_1, |
| POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, |
| &api_funcs); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_1(struct device *dev) |
| { |
| IRQ_CONNECT(CONFIG_SPI_1_IRQ, CONFIG_SPI_1_IRQ_PRI, |
| spi_stm32_isr, DEVICE_GET(spi_stm32_1), 0); |
| irq_enable(CONFIG_SPI_1_IRQ); |
| } |
| #endif |
| |
| #endif /* CONFIG_SPI_1 */ |
| |
| #ifdef CONFIG_SPI_2 |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_2(struct device *port); |
| #endif |
| |
| static const struct spi_stm32_config spi_stm32_cfg_2 = { |
| .spi = (SPI_TypeDef *) CONFIG_SPI_2_BASE_ADDRESS, |
| .pclken = { |
| .enr = LL_APB1_GRP1_PERIPH_SPI2, |
| .bus = STM32_CLOCK_BUS_APB1 |
| }, |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| .irq_config = spi_stm32_irq_config_func_2, |
| #endif |
| }; |
| |
| static struct spi_stm32_data spi_stm32_dev_data_2 = { |
| SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_2, ctx), |
| SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_2, ctx), |
| }; |
| |
| DEVICE_AND_API_INIT(spi_stm32_2, CONFIG_SPI_2_NAME, &spi_stm32_init, |
| &spi_stm32_dev_data_2, &spi_stm32_cfg_2, |
| POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, |
| &api_funcs); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_2(struct device *dev) |
| { |
| IRQ_CONNECT(CONFIG_SPI_2_IRQ, CONFIG_SPI_2_IRQ_PRI, |
| spi_stm32_isr, DEVICE_GET(spi_stm32_2), 0); |
| irq_enable(CONFIG_SPI_2_IRQ); |
| } |
| #endif |
| |
| #endif /* CONFIG_SPI_2 */ |
| |
| #ifdef CONFIG_SPI_3 |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_3(struct device *port); |
| #endif |
| |
| static const struct spi_stm32_config spi_stm32_cfg_3 = { |
| .spi = (SPI_TypeDef *) CONFIG_SPI_3_BASE_ADDRESS, |
| .pclken = { |
| .enr = LL_APB1_GRP1_PERIPH_SPI3, |
| .bus = STM32_CLOCK_BUS_APB1 |
| }, |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| .irq_config = spi_stm32_irq_config_func_3, |
| #endif |
| }; |
| |
| static struct spi_stm32_data spi_stm32_dev_data_3 = { |
| SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_3, ctx), |
| SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_3, ctx), |
| }; |
| |
| DEVICE_AND_API_INIT(spi_stm32_3, CONFIG_SPI_3_NAME, &spi_stm32_init, |
| &spi_stm32_dev_data_3, &spi_stm32_cfg_3, |
| POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, |
| &api_funcs); |
| |
| #ifdef CONFIG_SPI_STM32_INTERRUPT |
| static void spi_stm32_irq_config_func_3(struct device *dev) |
| { |
| IRQ_CONNECT(CONFIG_SPI_3_IRQ, CONFIG_SPI_3_IRQ_PRI, |
| spi_stm32_isr, DEVICE_GET(spi_stm32_3), 0); |
| irq_enable(CONFIG_SPI_3_IRQ); |
| } |
| #endif |
| |
| #endif /* CONFIG_SPI_3 */ |