| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef _FSL_PIT_H_ |
| #define _FSL_PIT_H_ |
| |
| #include "fsl_common.h" |
| |
| /*! |
| * @addtogroup pit |
| * @{ |
| */ |
| |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| /*! @name Driver version */ |
| /*@{*/ |
| #define FSL_PIT_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0 */ |
| /*@}*/ |
| |
| /*! |
| * @brief List of PIT channels |
| * @note Actual number of available channels is SoC dependent |
| */ |
| typedef enum _pit_chnl |
| { |
| kPIT_Chnl_0 = 0U, /*!< PIT channel number 0*/ |
| kPIT_Chnl_1, /*!< PIT channel number 1 */ |
| kPIT_Chnl_2, /*!< PIT channel number 2 */ |
| kPIT_Chnl_3, /*!< PIT channel number 3 */ |
| } pit_chnl_t; |
| |
| /*! @brief List of PIT interrupts */ |
| typedef enum _pit_interrupt_enable |
| { |
| kPIT_TimerInterruptEnable = PIT_TCTRL_TIE_MASK, /*!< Timer interrupt enable*/ |
| } pit_interrupt_enable_t; |
| |
| /*! @brief List of PIT status flags */ |
| typedef enum _pit_status_flags |
| { |
| kPIT_TimerFlag = PIT_TFLG_TIF_MASK, /*!< Timer flag */ |
| } pit_status_flags_t; |
| |
| /*! |
| * @brief PIT configuration structure |
| * |
| * This structure holds the configuration settings for the PIT peripheral. To initialize this |
| * structure to reasonable defaults, call the PIT_GetDefaultConfig() function and pass a |
| * pointer to your config structure instance. |
| * |
| * The configuration structure can be made constant so it resides in flash. |
| */ |
| typedef struct _pit_config |
| { |
| bool enableRunInDebug; /*!< true: Timers run in debug mode; false: Timers stop in debug mode */ |
| } pit_config_t; |
| |
| /******************************************************************************* |
| * API |
| ******************************************************************************/ |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @name Initialization and deinitialization |
| * @{ |
| */ |
| |
| /*! |
| * @brief Ungates the PIT clock, enables the PIT module, and configures the peripheral for basic operations. |
| * |
| * @note This API should be called at the beginning of the application using the PIT driver. |
| * |
| * @param base PIT peripheral base address |
| * @param config Pointer to the user's PIT config structure |
| */ |
| void PIT_Init(PIT_Type *base, const pit_config_t *config); |
| |
| /*! |
| * @brief Gates the PIT clock and disables the PIT module. |
| * |
| * @param base PIT peripheral base address |
| */ |
| void PIT_Deinit(PIT_Type *base); |
| |
| /*! |
| * @brief Fills in the PIT configuration structure with the default settings. |
| * |
| * The default values are as follows. |
| * @code |
| * config->enableRunInDebug = false; |
| * @endcode |
| * @param config Pointer to the onfiguration structure. |
| */ |
| static inline void PIT_GetDefaultConfig(pit_config_t *config) |
| { |
| assert(config); |
| |
| /* Timers are stopped in Debug mode */ |
| config->enableRunInDebug = false; |
| } |
| |
| #if defined(FSL_FEATURE_PIT_HAS_CHAIN_MODE) && FSL_FEATURE_PIT_HAS_CHAIN_MODE |
| |
| /*! |
| * @brief Enables or disables chaining a timer with the previous timer. |
| * |
| * When a timer has a chain mode enabled, it only counts after the previous |
| * timer has expired. If the timer n-1 has counted down to 0, counter n |
| * decrements the value by one. Each timer is 32-bits, which allows the developers |
| * to chain timers together and form a longer timer (64-bits and larger). The first timer |
| * (timer 0) can't be chained to any other timer. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number which is chained with the previous timer |
| * @param enable Enable or disable chain. |
| * true: Current timer is chained with the previous timer. |
| * false: Timer doesn't chain with other timers. |
| */ |
| static inline void PIT_SetTimerChainMode(PIT_Type *base, pit_chnl_t channel, bool enable) |
| { |
| if (enable) |
| { |
| base->CHANNEL[channel].TCTRL |= PIT_TCTRL_CHN_MASK; |
| } |
| else |
| { |
| base->CHANNEL[channel].TCTRL &= ~PIT_TCTRL_CHN_MASK; |
| } |
| } |
| |
| #endif /* FSL_FEATURE_PIT_HAS_CHAIN_MODE */ |
| |
| /*! @}*/ |
| |
| /*! |
| * @name Interrupt Interface |
| * @{ |
| */ |
| |
| /*! |
| * @brief Enables the selected PIT interrupts. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * @param mask The interrupts to enable. This is a logical OR of members of the |
| * enumeration ::pit_interrupt_enable_t |
| */ |
| static inline void PIT_EnableInterrupts(PIT_Type *base, pit_chnl_t channel, uint32_t mask) |
| { |
| base->CHANNEL[channel].TCTRL |= mask; |
| } |
| |
| /*! |
| * @brief Disables the selected PIT interrupts. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * @param mask The interrupts to disable. This is a logical OR of members of the |
| * enumeration ::pit_interrupt_enable_t |
| */ |
| static inline void PIT_DisableInterrupts(PIT_Type *base, pit_chnl_t channel, uint32_t mask) |
| { |
| base->CHANNEL[channel].TCTRL &= ~mask; |
| } |
| |
| /*! |
| * @brief Gets the enabled PIT interrupts. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * |
| * @return The enabled interrupts. This is the logical OR of members of the |
| * enumeration ::pit_interrupt_enable_t |
| */ |
| static inline uint32_t PIT_GetEnabledInterrupts(PIT_Type *base, pit_chnl_t channel) |
| { |
| return (base->CHANNEL[channel].TCTRL & PIT_TCTRL_TIE_MASK); |
| } |
| |
| /*! @}*/ |
| |
| /*! |
| * @name Status Interface |
| * @{ |
| */ |
| |
| /*! |
| * @brief Gets the PIT status flags. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * |
| * @return The status flags. This is the logical OR of members of the |
| * enumeration ::pit_status_flags_t |
| */ |
| static inline uint32_t PIT_GetStatusFlags(PIT_Type *base, pit_chnl_t channel) |
| { |
| return (base->CHANNEL[channel].TFLG & PIT_TFLG_TIF_MASK); |
| } |
| |
| /*! |
| * @brief Clears the PIT status flags. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * @param mask The status flags to clear. This is a logical OR of members of the |
| * enumeration ::pit_status_flags_t |
| */ |
| static inline void PIT_ClearStatusFlags(PIT_Type *base, pit_chnl_t channel, uint32_t mask) |
| { |
| base->CHANNEL[channel].TFLG = mask; |
| } |
| |
| /*! @}*/ |
| |
| /*! |
| * @name Read and Write the timer period |
| * @{ |
| */ |
| |
| /*! |
| * @brief Sets the timer period in units of count. |
| * |
| * Timers begin counting from the value set by this function until it reaches 0, |
| * then it generates an interrupt and load this register value again. |
| * Writing a new value to this register does not restart the timer. Instead, the value |
| * is loaded after the timer expires. |
| * |
| * @note Users can call the utility macros provided in fsl_common.h to convert to ticks. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * @param count Timer period in units of ticks |
| */ |
| static inline void PIT_SetTimerPeriod(PIT_Type *base, pit_chnl_t channel, uint32_t count) |
| { |
| base->CHANNEL[channel].LDVAL = count; |
| } |
| |
| /*! |
| * @brief Reads the current timer counting value. |
| * |
| * This function returns the real-time timer counting value, in a range from 0 to a |
| * timer period. |
| * |
| * @note Users can call the utility macros provided in fsl_common.h to convert ticks to usec or msec. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number |
| * |
| * @return Current timer counting value in ticks |
| */ |
| static inline uint32_t PIT_GetCurrentTimerCount(PIT_Type *base, pit_chnl_t channel) |
| { |
| return base->CHANNEL[channel].CVAL; |
| } |
| |
| /*! @}*/ |
| |
| /*! |
| * @name Timer Start and Stop |
| * @{ |
| */ |
| |
| /*! |
| * @brief Starts the timer counting. |
| * |
| * After calling this function, timers load period value, count down to 0 and |
| * then load the respective start value again. Each time a timer reaches 0, |
| * it generates a trigger pulse and sets the timeout interrupt flag. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number. |
| */ |
| static inline void PIT_StartTimer(PIT_Type *base, pit_chnl_t channel) |
| { |
| base->CHANNEL[channel].TCTRL |= PIT_TCTRL_TEN_MASK; |
| } |
| |
| /*! |
| * @brief Stops the timer counting. |
| * |
| * This function stops every timer counting. Timers reload their periods |
| * respectively after the next time they call the PIT_DRV_StartTimer. |
| * |
| * @param base PIT peripheral base address |
| * @param channel Timer channel number. |
| */ |
| static inline void PIT_StopTimer(PIT_Type *base, pit_chnl_t channel) |
| { |
| base->CHANNEL[channel].TCTRL &= ~PIT_TCTRL_TEN_MASK; |
| } |
| |
| /*! @}*/ |
| |
| #if defined(FSL_FEATURE_PIT_HAS_LIFETIME_TIMER) && FSL_FEATURE_PIT_HAS_LIFETIME_TIMER |
| |
| /*! |
| * @brief Reads the current lifetime counter value. |
| * |
| * The lifetime timer is a 64-bit timer which chains timer 0 and timer 1 together. |
| * Timer 0 and 1 are chained by calling the PIT_SetTimerChainMode before using this timer. |
| * The period of lifetime timer is equal to the "period of timer 0 * period of timer 1". |
| * For the 64-bit value, the higher 32-bit has the value of timer 1, and the lower 32-bit |
| * has the value of timer 0. |
| * |
| * @param base PIT peripheral base address |
| * |
| * @return Current lifetime timer value |
| */ |
| uint64_t PIT_GetLifetimeTimerCount(PIT_Type *base); |
| |
| #endif /* FSL_FEATURE_PIT_HAS_LIFETIME_TIMER */ |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| /*! @}*/ |
| |
| #endif /* _FSL_PIT_H_ */ |