blob: 00d9f662ff4208fb2577d7b4a1366067a766027b [file] [log] [blame]
/*
* Copyright (c) 2019 Linaro Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief System/hardware module for STM32L1 processor
*/
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/arch/cpu.h>
#include <zephyr/arch/arm/aarch32/cortex_m/cmsis.h>
#include <zephyr/arch/arm/aarch32/nmi.h>
#include <zephyr/irq.h>
#include <zephyr/linker/linker-defs.h>
#include <string.h>
#include <stm32_ll_bus.h>
#include <stm32_ll_pwr.h>
/**
* @brief Perform basic hardware initialization at boot.
*
* This needs to be run from the very beginning.
* So the init priority has to be 0 (zero).
*
* @return 0
*/
static int stm32l1_init(void)
{
uint32_t key;
key = irq_lock();
/* Install default handler that simply resets the CPU
* if configured in the kernel, NOP otherwise
*/
NMI_INIT();
irq_unlock(key);
/* Update CMSIS SystemCoreClock variable (HCLK) */
/* At reset, system core clock is set to 2.1 MHz from MSI */
SystemCoreClock = 2097000;
/* Default Voltage scaling range selection (range2)
* doesn't allow to configure Max frequency
* switch to range1 to match any frequency
*/
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
return 0;
}
SYS_INIT(stm32l1_init, PRE_KERNEL_1, 0);