| # Kconfig - MCUXpresso SDK UART |
| # |
| # Copyright (c) 2017, NXP |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig UART_MCUX |
| bool "MCUX uart driver" |
| depends on HAS_MCUX |
| default n |
| select SERIAL_HAS_DRIVER |
| help |
| Enable the MCUX uart driver. |
| |
| if UART_MCUX |
| |
| menuconfig UART_MCUX_0 |
| bool "UART 0" |
| default n |
| help |
| Enable UART 0. |
| |
| if UART_MCUX_0 |
| |
| config UART_MCUX_0_NAME |
| string "UART 0 driver name" |
| default "UART_0" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_0_IRQ_PRI |
| int "UART 0 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_0_BAUD_RATE |
| int "UART 0 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_0 |
| |
| menuconfig UART_MCUX_1 |
| bool "UART 1" |
| default n |
| help |
| Enable UART 1. |
| |
| if UART_MCUX_1 |
| |
| config UART_MCUX_1_NAME |
| string "UART 1 driver name" |
| default "UART_1" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_1_IRQ_PRI |
| int "UART 1 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_1_BAUD_RATE |
| int "UART 1 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_1 |
| |
| menuconfig UART_MCUX_2 |
| bool "UART 2" |
| default n |
| help |
| Enable UART 2. |
| |
| if UART_MCUX_2 |
| |
| config UART_MCUX_2_NAME |
| string "UART 2 driver name" |
| default "UART_2" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_2_IRQ_PRI |
| int "UART 2 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_2_BAUD_RATE |
| int "UART 2 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_2 |
| |
| menuconfig UART_MCUX_3 |
| bool "UART 3" |
| default n |
| help |
| Enable UART 3. |
| |
| if UART_MCUX_3 |
| |
| config UART_MCUX_3_NAME |
| string "UART 3 driver name" |
| default "UART_3" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_3_IRQ_PRI |
| int "UART 3 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_3_BAUD_RATE |
| int "UART 3 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_3 |
| |
| menuconfig UART_MCUX_4 |
| bool "UART 4" |
| default n |
| help |
| Enable UART 4. |
| |
| if UART_MCUX_4 |
| |
| config UART_MCUX_4_NAME |
| string "UART 4 driver name" |
| default "UART_4" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_4_IRQ_PRI |
| int "UART 4 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_4_BAUD_RATE |
| int "UART 4 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_4 |
| |
| menuconfig UART_MCUX_5 |
| bool "UART 5" |
| default n |
| help |
| Enable UART 5. |
| |
| if UART_MCUX_5 |
| |
| config UART_MCUX_5_NAME |
| string "UART 5 driver name" |
| default "UART_5" |
| |
| if !HAS_DTS |
| |
| config UART_MCUX_5_IRQ_PRI |
| int "UART 5 interrupt priority" |
| default 0 |
| |
| config UART_MCUX_5_BAUD_RATE |
| int "UART 5 baud rate" |
| default 115200 |
| |
| endif # !HAS_DTS |
| |
| endif # UART_MCUX_5 |
| |
| endif # UART_MCUX |
