| /* This file is a temporary workaround for mapping of the generated information |
| * to the current driver definitions. This will be removed when the drivers |
| * are modified to handle the generated information, or the mapping of |
| * generated data matches the driver definitions. |
| */ |
| |
| |
| #define CONFIG_NUM_IRQS ARM_ARMV7M_NVIC_E000E100_NUM_IRQS |
| #define CONFIG_NUM_IRQ_PRIO_BITS ARM_ARMV7M_NVIC_E000E100_NUM_IRQ_PRIO_BITS |
| |
| #define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40013800_BASE_ADDRESS |
| #define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_BAUD_RATE |
| #define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40013800_ZEPHYR_IRQ_PRIO |
| #define PORT_1_IRQ ST_STM32_USART_40013800_IRQ_0 |
| |
| #define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS |
| #define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_BAUD_RATE |
| #define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_ZEPHYR_IRQ_PRIO |
| #define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0 |
| |
| #define CONFIG_UART_STM32_PORT_3_BASE_ADDRESS ST_STM32_USART_40004800_BASE_ADDRESS |
| #define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_BAUD_RATE |
| #define CONFIG_UART_STM32_PORT_3_IRQ_PRI ST_STM32_USART_40004800_ZEPHYR_IRQ_PRIO |
| #define PORT_3_IRQ ST_STM32_USART_40004800_IRQ_0 |
| |
| #define CONFIG_UART_STM32_PORT_4_BASE_ADDRESS ST_STM32_USART_40004C00_BASE_ADDRESS |
| #define CONFIG_UART_STM32_PORT_4_BAUD_RATE ST_STM32_USART_40004C00_BAUD_RATE |
| #define CONFIG_UART_STM32_PORT_4_IRQ_PRI ST_STM32_USART_40004C00_ZEPHYR_IRQ_PRIO |
| #define PORT_4_IRQ ST_STM32_USART_40004C00_IRQ_0 |
| |
| #define CONFIG_UART_STM32_PORT_5_BASE_ADDRESS ST_STM32_USART_40005000_BASE_ADDRESS |
| #define CONFIG_UART_STM32_PORT_5_BAUD_RATE ST_STM32_USART_40005000_BAUD_RATE |
| #define CONFIG_UART_STM32_PORT_5_IRQ_PRI ST_STM32_USART_40005000_ZEPHYR_IRQ_PRIO |
| #define PORT_5_IRQ ST_STM32_USART_40005000_IRQ_0 |
