| Title: Nanokernel Object Performance |
| |
| Description: |
| |
| The SysKernel test measures the performance of the nanokernel's semaphore, |
| lifo, fifo and stack objects. |
| |
| -------------------------------------------------------------------------------- |
| |
| Building and Running Project: |
| |
| This microkernel project outputs to the console. It can be built and executed |
| on QEMU as follows: |
| |
| make qemu |
| |
| -------------------------------------------------------------------------------- |
| |
| Troubleshooting: |
| |
| Problems caused by out-dated project information can be addressed by |
| issuing one of the following commands then rebuilding the project: |
| |
| make clean # discard results of previous builds |
| # but keep existing configuration info |
| or |
| make pristine # discard results of previous builds |
| # and restore pre-defined configuration info |
| |
| -------------------------------------------------------------------------------- |
| |
| Sample Output: |
| |
| MODULE: Nanokernel API test |
| KERNEL VERSION: <varies> |
| |
| Each test below are repeated 5000 times and the average |
| time for one iteration is displayed. |
| |
| TEST CASE: Semaphore #1 |
| TEST COVERAGE: |
| nano_sem_init |
| nano_fiber_sem_take(TICKS_UNLIMITED) |
| nano_fiber_sem_give |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: Semaphore #2 |
| TEST COVERAGE: |
| nano_sem_init |
| nano_fiber_sem_take(TICKS_NONE) |
| fiber_yield |
| nano_fiber_sem_give |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: Semaphore #3 |
| TEST COVERAGE: |
| nano_sem_init |
| nano_fiber_sem_take(TICKS_UNLIMITED) |
| nano_fiber_sem_give |
| nano_task_sem_give |
| nano_task_sem_take(TICKS_UNLIMITED) |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: LIFO #1 |
| TEST COVERAGE: |
| nano_lifo_init |
| nano_fiber_lifo_get(TICKS_UNLIMITED) |
| nano_fiber_lifo_put |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: LIFO #2 |
| TEST COVERAGE: |
| nano_lifo_init |
| nano_fiber_lifo_get(TICKS_UNLIMITED) |
| nano_fiber_lifo_get(TICKS_NONE) |
| nano_fiber_lifo_put |
| fiber_yield |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: LIFO #3 |
| TEST COVERAGE: |
| nano_lifo_init |
| nano_fiber_lifo_get(TICKS_UNLIMITED) |
| nano_fiber_lifo_put |
| nano_task_lifo_get(TICKS_UNLIMITED) |
| nano_task_lifo_put |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: FIFO #1 |
| TEST COVERAGE: |
| nano_fifo_init |
| nano_fiber_fifo_get |
| nano_fiber_fifo_put |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: FIFO #2 |
| TEST COVERAGE: |
| nano_fifo_init |
| nano_fiber_fifo_get(TICKS_UNLIMITED) |
| nano_fiber_fifo_get |
| nano_fiber_fifo_put |
| fiber_yield |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: FIFO #3 |
| TEST COVERAGE: |
| nano_fifo_init |
| nano_fiber_fifo_get |
| nano_fiber_fifo_put |
| nano_task_fifo_get |
| nano_task_fifo_put |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: Stack #1 |
| TEST COVERAGE: |
| nano_stack_init |
| nano_fiber_stack_pop(TICKS_UNLIMITED) |
| nano_fiber_stack_push |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: Stack #2 |
| TEST COVERAGE: |
| nano_stack_init |
| nano_fiber_stack_pop(TICKS_UNLIMITED) |
| nano_fiber_stack_pop |
| nano_fiber_stack_push |
| fiber_yield |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| TEST CASE: Stack #3 |
| TEST COVERAGE: |
| nano_stack_init |
| nano_fiber_stack_pop(TICKS_UNLIMITED) |
| nano_fiber_stack_push |
| nano_task_stack_pop(TICKS_UNLIMITED) |
| nano_task_stack_push |
| Starting test. Please wait... |
| TEST RESULT: SUCCESSFUL |
| DETAILS: Average time for 1 iteration: NNNN nSec |
| END TEST CASE |
| |
| PROJECT EXECUTION SUCCESSFUL |
