| # |
| # Copyright (c) 2017 Linaro Limited |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig LPS22HB |
| bool |
| prompt "LPS22HB pressure and temperature" |
| depends on I2C |
| default n |
| help |
| Enable driver for LPS22HB I2C-based pressure and temperature |
| sensor. |
| |
| config LPS22HB_DEV_NAME |
| string |
| prompt "Device name" |
| default "LPS22HB" |
| depends on LPS22HB |
| help |
| Device name used for LPS22HB sensor identification. |
| |
| config LPS22HB_I2C_ADDR |
| hex |
| prompt "I2C address" |
| depends on LPS22HB |
| default 0x5D |
| range 0x5C 0x5D |
| help |
| I2C address of the LPS22HB sensor. |
| Use 0x5C if the SA0 pin is pulled to GND or 0x5D if the SA0 |
| pin is pulled to VDD. |
| |
| config LPS22HB_I2C_MASTER_DEV_NAME |
| string |
| prompt "I2C master where LPS22HB is connected" |
| depends on LPS22HB |
| default I2C_0_NAME |
| help |
| Specify the device name of the I2C master device to which |
| LPS22HB is connected. |
| |
| menu "Attributes" |
| depends on LPS22HB |
| |
| config LPS22HB_SAMPLING_RATE |
| int |
| prompt "Output data rate" |
| depends on LPS22HB |
| default 25 |
| help |
| Sensor output data rate expressed in samples per second. |
| Data rates supported by the chip are 1, 10, 25, 50, 75. |
| |
| endmenu |
