| description: STM32 USART |
| |
| compatible: "st,stm32-usart" |
| |
| include: [uart-controller.yaml, pinctrl-device.yaml] |
| |
| properties: |
| reg: |
| required: true |
| |
| interrupts: |
| required: true |
| |
| single-wire: |
| type: boolean |
| required: false |
| description: | |
| Enable the single wire half-duplex communication. |
| Using this mode, TX and RX lines are internally connected and |
| only TX pin is used afterwards and should be configured. |
| RX/TX conflicts must be handled on user side. |
| |
| tx-rx-swap: |
| type: boolean |
| required: false |
| description: | |
| Swap the TX and RX pins. Used in case of a cross-wired connection. |
| |
| pinctrl-0: |
| required: true |
| |
| pinctrl-names: |
| required: true |
