| /* |
| * Copyright (c) 2018 Intel Corporation. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/device.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/timeout_q.h> |
| #include <zephyr/init.h> |
| #include <string.h> |
| #include <zephyr/pm/device.h> |
| #include <zephyr/pm/device_runtime.h> |
| #include <zephyr/pm/pm.h> |
| #include <zephyr/pm/state.h> |
| #include <zephyr/pm/policy.h> |
| #include <zephyr/tracing/tracing.h> |
| |
| #include "pm_stats.h" |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(pm, CONFIG_PM_LOG_LEVEL); |
| |
| #define CURRENT_CPU \ |
| (COND_CODE_1(CONFIG_SMP, (arch_curr_cpu()->id), (_current_cpu->id))) |
| |
| static ATOMIC_DEFINE(z_post_ops_required, CONFIG_MP_NUM_CPUS); |
| static sys_slist_t pm_notifiers = SYS_SLIST_STATIC_INIT(&pm_notifiers); |
| |
| /* |
| * Properly initialize cpu power states. Do not make assumptions that |
| * ACTIVE_STATE is 0 |
| */ |
| #define CPU_PM_STATE_INIT(_, __) \ |
| { .state = PM_STATE_ACTIVE } |
| static struct pm_state_info z_cpus_pm_state[] = { |
| LISTIFY(CONFIG_MP_NUM_CPUS, CPU_PM_STATE_INIT, (,)) |
| }; |
| |
| static struct pm_state_info z_cpus_pm_forced_state[] = { |
| LISTIFY(CONFIG_MP_NUM_CPUS, CPU_PM_STATE_INIT, (,)) |
| }; |
| |
| static struct k_spinlock pm_forced_state_lock; |
| |
| #if defined(CONFIG_PM_DEVICE) && !defined(CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE) |
| static atomic_t z_cpus_active = ATOMIC_INIT(CONFIG_MP_NUM_CPUS); |
| #endif |
| static struct k_spinlock pm_notifier_lock; |
| |
| |
| #ifdef CONFIG_PM_DEVICE |
| extern const struct device *__pm_device_slots_start[]; |
| |
| #if !defined(CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE) |
| /* Number of devices successfully suspended. */ |
| static size_t num_susp; |
| |
| static int pm_suspend_devices(void) |
| { |
| const struct device *devs; |
| size_t devc; |
| |
| devc = z_device_get_all_static(&devs); |
| |
| num_susp = 0; |
| |
| for (const struct device *dev = devs + devc - 1; dev >= devs; dev--) { |
| int ret; |
| |
| /* |
| * ignore busy devices, wake up source and devices with |
| * runtime PM enabled. |
| */ |
| if (pm_device_is_busy(dev) || pm_device_state_is_locked(dev) |
| || pm_device_wakeup_is_enabled(dev) || |
| ((dev->pm != NULL) && pm_device_runtime_is_enabled(dev))) { |
| continue; |
| } |
| |
| ret = pm_device_action_run(dev, PM_DEVICE_ACTION_SUSPEND); |
| /* ignore devices not supporting or already at the given state */ |
| if ((ret == -ENOSYS) || (ret == -ENOTSUP) || (ret == -EALREADY)) { |
| continue; |
| } else if (ret < 0) { |
| LOG_ERR("Device %s did not enter %s state (%d)", |
| dev->name, |
| pm_device_state_str(PM_DEVICE_STATE_SUSPENDED), |
| ret); |
| return ret; |
| } |
| |
| __pm_device_slots_start[num_susp] = dev; |
| num_susp++; |
| } |
| |
| return 0; |
| } |
| |
| static void pm_resume_devices(void) |
| { |
| for (int i = (num_susp - 1); i >= 0; i--) { |
| pm_device_action_run(__pm_device_slots_start[i], |
| PM_DEVICE_ACTION_RESUME); |
| } |
| |
| num_susp = 0; |
| } |
| #endif /* !CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE */ |
| #endif /* CONFIG_PM_DEVICE */ |
| |
| static inline void pm_exit_pos_ops(struct pm_state_info *info) |
| { |
| extern __weak void |
| pm_state_exit_post_ops(enum pm_state state, uint8_t substate_id); |
| |
| if (pm_state_exit_post_ops != NULL) { |
| pm_state_exit_post_ops(info->state, info->substate_id); |
| } else { |
| /* |
| * This function is supposed to be overridden to do SoC or |
| * architecture specific post ops after sleep state exits. |
| * |
| * The kernel expects that irqs are unlocked after this. |
| */ |
| |
| irq_unlock(0); |
| } |
| } |
| |
| static inline void state_set(struct pm_state_info *info) |
| { |
| extern __weak void |
| pm_state_set(enum pm_state state, uint8_t substate_id); |
| |
| if (pm_state_set != NULL) { |
| pm_state_set(info->state, info->substate_id); |
| } |
| } |
| |
| /* |
| * Function called to notify when the system is entering / exiting a |
| * power state |
| */ |
| static inline void pm_state_notify(bool entering_state) |
| { |
| struct pm_notifier *notifier; |
| k_spinlock_key_t pm_notifier_key; |
| void (*callback)(enum pm_state state); |
| |
| pm_notifier_key = k_spin_lock(&pm_notifier_lock); |
| SYS_SLIST_FOR_EACH_CONTAINER(&pm_notifiers, notifier, _node) { |
| if (entering_state) { |
| callback = notifier->state_entry; |
| } else { |
| callback = notifier->state_exit; |
| } |
| |
| if (callback) { |
| callback(z_cpus_pm_state[_current_cpu->id].state); |
| } |
| } |
| k_spin_unlock(&pm_notifier_lock, pm_notifier_key); |
| } |
| |
| void pm_system_resume(void) |
| { |
| uint8_t id = CURRENT_CPU; |
| |
| /* |
| * This notification is called from the ISR of the event |
| * that caused exit from kernel idling after PM operations. |
| * |
| * Some CPU low power states require enabling of interrupts |
| * atomically when entering those states. The wake up from |
| * such a state first executes code in the ISR of the interrupt |
| * that caused the wake. This hook will be called from the ISR. |
| * For such CPU LPS states, do post operations and restores here. |
| * The kernel scheduler will get control after the ISR finishes |
| * and it may schedule another thread. |
| */ |
| if (atomic_test_and_clear_bit(z_post_ops_required, id)) { |
| pm_exit_pos_ops(&z_cpus_pm_state[id]); |
| pm_state_notify(false); |
| z_cpus_pm_state[id] = (struct pm_state_info){PM_STATE_ACTIVE, |
| 0, 0}; |
| } |
| } |
| |
| bool pm_state_force(uint8_t cpu, const struct pm_state_info *info) |
| { |
| k_spinlock_key_t key; |
| |
| __ASSERT(info->state < PM_STATE_COUNT, |
| "Invalid power state %d!", info->state); |
| |
| key = k_spin_lock(&pm_forced_state_lock); |
| z_cpus_pm_forced_state[cpu] = *info; |
| k_spin_unlock(&pm_forced_state_lock, key); |
| |
| return true; |
| } |
| |
| bool pm_system_suspend(int32_t ticks) |
| { |
| uint8_t id = CURRENT_CPU; |
| k_spinlock_key_t key; |
| |
| SYS_PORT_TRACING_FUNC_ENTER(pm, system_suspend, ticks); |
| |
| key = k_spin_lock(&pm_forced_state_lock); |
| if (z_cpus_pm_forced_state[id].state != PM_STATE_ACTIVE) { |
| z_cpus_pm_state[id] = z_cpus_pm_forced_state[id]; |
| z_cpus_pm_forced_state[id].state = PM_STATE_ACTIVE; |
| } else { |
| const struct pm_state_info *info; |
| |
| info = pm_policy_next_state(id, ticks); |
| if (info != NULL) { |
| z_cpus_pm_state[id] = *info; |
| } |
| } |
| k_spin_unlock(&pm_forced_state_lock, key); |
| |
| if (z_cpus_pm_state[id].state == PM_STATE_ACTIVE) { |
| LOG_DBG("No PM operations done."); |
| SYS_PORT_TRACING_FUNC_EXIT(pm, system_suspend, ticks, |
| z_cpus_pm_state[id].state); |
| return false; |
| } |
| |
| if (ticks != K_TICKS_FOREVER) { |
| /* |
| * We need to set the timer to interrupt a little bit early to |
| * accommodate the time required by the CPU to fully wake up. |
| */ |
| z_set_timeout_expiry(ticks - |
| k_us_to_ticks_ceil32( |
| z_cpus_pm_state[id].exit_latency_us), |
| true); |
| } |
| |
| #if defined(CONFIG_PM_DEVICE) && !defined(CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE) |
| if ((z_cpus_pm_state[id].state != PM_STATE_RUNTIME_IDLE) && |
| (atomic_sub(&z_cpus_active, 1) == 1)) { |
| if (pm_suspend_devices()) { |
| pm_resume_devices(); |
| z_cpus_pm_state[id].state = PM_STATE_ACTIVE; |
| (void)atomic_add(&z_cpus_active, 1); |
| SYS_PORT_TRACING_FUNC_EXIT(pm, system_suspend, ticks, |
| z_cpus_pm_state[id].state); |
| return false; |
| } |
| } |
| #endif |
| /* |
| * This function runs with interruptions locked but it is |
| * expected the SoC to unlock them in |
| * pm_state_exit_post_ops() when returning to active |
| * state. We don't want to be scheduled out yet, first we need |
| * to send a notification about leaving the idle state. So, |
| * we lock the scheduler here and unlock just after we have |
| * sent the notification in pm_system_resume(). |
| */ |
| k_sched_lock(); |
| pm_stats_start(); |
| /* Enter power state */ |
| pm_state_notify(true); |
| atomic_set_bit(z_post_ops_required, id); |
| state_set(&z_cpus_pm_state[id]); |
| pm_stats_stop(); |
| |
| /* Wake up sequence starts here */ |
| #if defined(CONFIG_PM_DEVICE) && !defined(CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE) |
| if (atomic_add(&z_cpus_active, 1) == 0) { |
| pm_resume_devices(); |
| } |
| #endif |
| pm_stats_update(z_cpus_pm_state[id].state); |
| pm_system_resume(); |
| k_sched_unlock(); |
| SYS_PORT_TRACING_FUNC_EXIT(pm, system_suspend, ticks, |
| z_cpus_pm_state[id].state); |
| |
| return true; |
| } |
| |
| void pm_notifier_register(struct pm_notifier *notifier) |
| { |
| k_spinlock_key_t pm_notifier_key = k_spin_lock(&pm_notifier_lock); |
| |
| sys_slist_append(&pm_notifiers, ¬ifier->_node); |
| k_spin_unlock(&pm_notifier_lock, pm_notifier_key); |
| } |
| |
| int pm_notifier_unregister(struct pm_notifier *notifier) |
| { |
| int ret = -EINVAL; |
| k_spinlock_key_t pm_notifier_key; |
| |
| pm_notifier_key = k_spin_lock(&pm_notifier_lock); |
| if (sys_slist_find_and_remove(&pm_notifiers, &(notifier->_node))) { |
| ret = 0; |
| } |
| k_spin_unlock(&pm_notifier_lock, pm_notifier_key); |
| |
| return ret; |
| } |
| |
| const struct pm_state_info *pm_state_next_get(uint8_t cpu) |
| { |
| return &z_cpus_pm_state[cpu]; |
| } |