| /* |
| * Copyright (c) 2017 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf52832_qfaa.dtsi> |
| #include "96b_lscon.dtsi" |
| |
| / { |
| model = "Seeed Studio Nitrogen 96board"; |
| compatible = "seeed,nitrogen", "nordic,nrf52832-qfaa", |
| "nordic,nrf52832"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,bt-mon-uart = &uart0; |
| zephyr,bt-c2h-uart = &uart0; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| bt = &led1; |
| sw0 = &button0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| /* green led */ |
| led0: led_0 { |
| gpios = <&gpio0 29 0>; |
| label = "USR1 LED"; |
| }; |
| /* blue led */ |
| led1: led_1 { |
| gpios = <&gpio0 28 0>; |
| label = "BT LED"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| /* gpio flags need validation */ |
| gpios = <&gpio0 27 GPIO_INT_ACTIVE_LOW>; |
| label = "User Push Button"; |
| }; |
| }; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| compatible = "nordic,nrf-uart"; |
| current-speed = <115200>; |
| status = "okay"; |
| tx-pin = <13>; |
| rx-pin = <15>; |
| rts-pin = <12>; |
| cts-pin = <14>; |
| }; |
| |
| &i2c0 { |
| compatible = "nordic,nrf-twi"; |
| status = "okay"; |
| sda-pin = <20>; |
| scl-pin = <22>; |
| }; |
| |
| &spi1 { |
| compatible = "nordic,nrf-spi"; |
| status = "okay"; |
| sck-pin = <26>; |
| mosi-pin = <23>; |
| miso-pin = <25>; |
| }; |
| |
| &flash0 { |
| /* |
| * For more information, see: |
| * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0xa000>; |
| }; |
| slot0_partition: partition@a000 { |
| label = "image-0"; |
| reg = <0x0000a000 0x33000>; |
| }; |
| slot1_partition: partition@3d000 { |
| label = "image-1"; |
| reg = <0x0003d000 0x33000>; |
| }; |
| scratch_partition: partition@70000 { |
| label = "image-scratch"; |
| reg = <0x00070000 0xa000>; |
| }; |
| |
| /* |
| * The flash starting at 0x0007a000 and ending at |
| * 0x0007ffff (sectors 122-127) is reserved for use |
| * by the application. If enabled, partition for FCB/NFFS |
| * will be created in this area. |
| */ |
| storage_partition: partition@7a000 { |
| label = "storage"; |
| reg = <0x0007a000 0x00006000>; |
| }; |
| }; |
| }; |