| /** @file |
| * @brief Pipe UART driver |
| * |
| * A pipe UART driver allowing application to handle all aspects of received |
| * protocol data. |
| */ |
| |
| /* |
| * Copyright (c) 2015 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(uart_pipe); |
| |
| #include <zephyr/kernel.h> |
| |
| #include <zephyr/drivers/uart.h> |
| |
| #include <zephyr/drivers/uart_pipe.h> |
| #include <zephyr/sys/printk.h> |
| |
| static const struct device *const uart_pipe_dev = |
| DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_pipe)); |
| |
| static uint8_t *recv_buf; |
| static size_t recv_buf_len; |
| static uart_pipe_recv_cb app_cb; |
| static size_t recv_off; |
| |
| static void uart_pipe_rx(const struct device *dev) |
| { |
| /* As per the API, the interrupt may be an edge so keep |
| * reading from the FIFO until it's empty. |
| */ |
| for (;;) { |
| int avail = recv_buf_len - recv_off; |
| int got; |
| |
| got = uart_fifo_read(uart_pipe_dev, recv_buf + recv_off, avail); |
| if (got <= 0) { |
| break; |
| } |
| |
| LOG_HEXDUMP_DBG(recv_buf + recv_off, got, "RX"); |
| |
| /* |
| * Call application callback with received data. Application |
| * may provide new buffer or alter data offset. |
| */ |
| recv_off += got; |
| recv_buf = app_cb(recv_buf, &recv_off); |
| } |
| } |
| |
| static void uart_pipe_isr(const struct device *dev, void *user_data) |
| { |
| ARG_UNUSED(user_data); |
| |
| uart_irq_update(dev); |
| |
| if (uart_irq_rx_ready(dev)) { |
| uart_pipe_rx(dev); |
| } |
| } |
| |
| int uart_pipe_send(const uint8_t *data, int len) |
| { |
| LOG_HEXDUMP_DBG(data, len, "TX"); |
| |
| while (len--) { |
| uart_poll_out(uart_pipe_dev, *data++); |
| } |
| |
| return 0; |
| } |
| |
| static void uart_pipe_setup(const struct device *uart) |
| { |
| uint8_t c; |
| |
| uart_irq_rx_disable(uart); |
| uart_irq_tx_disable(uart); |
| |
| /* Drain the fifo */ |
| while (uart_fifo_read(uart, &c, 1)) { |
| continue; |
| } |
| |
| uart_irq_callback_set(uart, uart_pipe_isr); |
| |
| uart_irq_rx_enable(uart); |
| } |
| |
| void uart_pipe_register(uint8_t *buf, size_t len, uart_pipe_recv_cb cb) |
| { |
| recv_buf = buf; |
| recv_buf_len = len; |
| app_cb = cb; |
| |
| if (device_is_ready(uart_pipe_dev)) { |
| uart_pipe_setup(uart_pipe_dev); |
| } |
| } |