blob: 47a4fbddf4cf835c1513b95edb3516cf8d534791 [file] [log] [blame]
/*
* Copyright (c) 2016 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @brief Mailboxes.
*/
#include <kernel.h>
#include <kernel_structs.h>
#include <debug/object_tracing_common.h>
#include <toolchain.h>
#include <linker/sections.h>
#include <string.h>
#include <wait_q.h>
#include <misc/dlist.h>
#include <init.h>
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/* asynchronous message descriptor type */
struct k_mbox_async {
struct _thread_base thread; /* dummy thread object */
struct k_mbox_msg tx_msg; /* transmit message descriptor */
};
/* array of asynchronous message descriptors */
static struct k_mbox_async __noinit async_msg[CONFIG_NUM_MBOX_ASYNC_MSGS];
/* stack of unused asynchronous message descriptors */
K_STACK_DEFINE(async_msg_free, CONFIG_NUM_MBOX_ASYNC_MSGS);
/* allocate an asynchronous message descriptor */
static inline void _mbox_async_alloc(struct k_mbox_async **async)
{
k_stack_pop(&async_msg_free, (u32_t *)async, K_FOREVER);
}
/* free an asynchronous message descriptor */
static inline void _mbox_async_free(struct k_mbox_async *async)
{
k_stack_push(&async_msg_free, (u32_t)async);
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS > 0 */
extern struct k_mbox _k_mbox_list_start[];
extern struct k_mbox _k_mbox_list_end[];
#ifdef CONFIG_OBJECT_TRACING
struct k_mbox *_trace_list_k_mbox;
#endif /* CONFIG_OBJECT_TRACING */
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) || \
defined(CONFIG_OBJECT_TRACING)
/*
* Do run-time initialization of mailbox object subsystem.
*/
static int init_mbox_module(struct device *dev)
{
ARG_UNUSED(dev);
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/*
* Create pool of asynchronous message descriptors.
*
* A dummy thread requires minimal initialization, since it never gets
* to execute. The _THREAD_DUMMY flag is sufficient to distinguish a
* dummy thread from a real one. The threads are *not* added to the
* kernel's list of known threads.
*
* Once initialized, the address of each descriptor is added to a stack
* that governs access to them.
*/
int i;
for (i = 0; i < CONFIG_NUM_MBOX_ASYNC_MSGS; i++) {
_init_thread_base(&async_msg[i].thread, 0, _THREAD_DUMMY, 0);
k_stack_push(&async_msg_free, (u32_t)&async_msg[i]);
}
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS > 0 */
/* Complete initialization of statically defined mailboxes. */
#ifdef CONFIG_OBJECT_TRACING
struct k_mbox *mbox;
for (mbox = _k_mbox_list_start; mbox < _k_mbox_list_end; mbox++) {
SYS_TRACING_OBJ_INIT(k_mbox, mbox);
}
#endif /* CONFIG_OBJECT_TRACING */
return 0;
}
SYS_INIT(init_mbox_module, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_OBJECTS);
#endif /* CONFIG_NUM_MBOX_ASYNC_MSGS or CONFIG_OBJECT_TRACING */
void k_mbox_init(struct k_mbox *mbox_ptr)
{
sys_dlist_init(&mbox_ptr->tx_msg_queue);
sys_dlist_init(&mbox_ptr->rx_msg_queue);
SYS_TRACING_OBJ_INIT(k_mbox, mbox_ptr);
}
/**
* @brief Check compatibility of sender's and receiver's message descriptors.
*
* Compares sender's and receiver's message descriptors to see if they are
* compatible. If so, the descriptor fields are updated to reflect that a
* match has occurred.
*
* @param tx_msg Pointer to transmit message descriptor.
* @param rx_msg Pointer to receive message descriptor.
*
* @return 0 if successfully matched, otherwise -1.
*/
static int _mbox_message_match(struct k_mbox_msg *tx_msg,
struct k_mbox_msg *rx_msg)
{
u32_t temp_info;
if (((tx_msg->tx_target_thread == (k_tid_t)K_ANY) ||
(tx_msg->tx_target_thread == rx_msg->tx_target_thread)) &&
((rx_msg->rx_source_thread == (k_tid_t)K_ANY) ||
(rx_msg->rx_source_thread == tx_msg->rx_source_thread))) {
/* update thread identifier fields for both descriptors */
rx_msg->rx_source_thread = tx_msg->rx_source_thread;
tx_msg->tx_target_thread = rx_msg->tx_target_thread;
/* update application info fields for both descriptors */
temp_info = rx_msg->info;
rx_msg->info = tx_msg->info;
tx_msg->info = temp_info;
/* update data size field for receiver only */
if (rx_msg->size > tx_msg->size) {
rx_msg->size = tx_msg->size;
}
/* update data location fields for receiver only */
rx_msg->tx_data = tx_msg->tx_data;
rx_msg->tx_block = tx_msg->tx_block;
if (rx_msg->tx_data != NULL) {
rx_msg->tx_block.data = NULL;
} else if (rx_msg->tx_block.data != NULL) {
rx_msg->tx_data = rx_msg->tx_block.data;
}
/* update syncing thread field for receiver only */
rx_msg->_syncing_thread = tx_msg->_syncing_thread;
return 0;
}
return -1;
}
/**
* @brief Dispose of received message.
*
* Releases any memory pool block still associated with the message,
* then notifies the sender that message processing is complete.
*
* @param rx_msg Pointer to receive message descriptor.
*
* @return N/A
*/
static void _mbox_message_dispose(struct k_mbox_msg *rx_msg)
{
struct k_thread *sending_thread;
struct k_mbox_msg *tx_msg;
unsigned int key;
/* do nothing if message was disposed of when it was received */
if (rx_msg->_syncing_thread == NULL) {
return;
}
/* release sender's memory pool block */
if (rx_msg->tx_block.data != NULL) {
k_mem_pool_free(&rx_msg->tx_block);
rx_msg->tx_block.data = NULL;
}
/* recover sender info */
sending_thread = rx_msg->_syncing_thread;
rx_msg->_syncing_thread = NULL;
tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data;
/* update data size field for sender */
tx_msg->size = rx_msg->size;
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/*
* asynchronous send: free asynchronous message descriptor +
* dummy thread pair, then give semaphore (if needed)
*/
if (sending_thread->base.thread_state & _THREAD_DUMMY) {
struct k_sem *async_sem = tx_msg->_async_sem;
_mbox_async_free((struct k_mbox_async *)sending_thread);
if (async_sem != NULL) {
k_sem_give(async_sem);
}
return;
}
#endif
/* synchronous send: wake up sending thread */
key = irq_lock();
_set_thread_return_value(sending_thread, 0);
_mark_thread_as_not_pending(sending_thread);
_ready_thread(sending_thread);
_reschedule_threads(key);
}
/**
* @brief Send a mailbox message.
*
* Helper routine that handles both synchronous and asynchronous sends.
*
* @param mbox Pointer to the mailbox object.
* @param tx_msg Pointer to transmit message descriptor.
* @param timeout Maximum time (milliseconds) to wait for the message to be
* received (although not necessarily completely processed).
* Use K_NO_WAIT to return immediately, or K_FOREVER to wait as long
* as necessary.
*
* @return 0 if successful, -ENOMSG if failed immediately, -EAGAIN if timed out
*/
static int _mbox_message_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg,
s32_t timeout)
{
struct k_thread *sending_thread;
struct k_thread *receiving_thread, *next;
struct k_mbox_msg *rx_msg;
unsigned int key;
/* save sender id so it can be used during message matching */
tx_msg->rx_source_thread = _current;
/* finish readying sending thread (actual or dummy) for send */
sending_thread = tx_msg->_syncing_thread;
sending_thread->base.swap_data = tx_msg;
/* search mailbox's rx queue for a compatible receiver */
key = irq_lock();
SYS_DLIST_FOR_EACH_CONTAINER_SAFE(&mbox->rx_msg_queue, receiving_thread,
next, base.k_q_node) {
rx_msg = (struct k_mbox_msg *)receiving_thread->base.swap_data;
if (_mbox_message_match(tx_msg, rx_msg) == 0) {
/* take receiver out of rx queue */
_unpend_thread(receiving_thread);
_abort_thread_timeout(receiving_thread);
/* ready receiver for execution */
_set_thread_return_value(receiving_thread, 0);
_ready_thread(receiving_thread);
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/*
* asynchronous send: swap out current thread
* if receiver has priority, otherwise let it continue
*
* note: dummy sending thread sits (unqueued)
* until the receiver consumes the message
*/
if (sending_thread->base.thread_state & _THREAD_DUMMY) {
_reschedule_threads(key);
return 0;
}
#endif
/*
* synchronous send: pend current thread (unqueued)
* until the receiver consumes the message
*/
_remove_thread_from_ready_q(_current);
_mark_thread_as_pending(_current);
return _Swap(key);
}
}
/* didn't find a matching receiver: don't wait for one */
if (timeout == K_NO_WAIT) {
irq_unlock(key);
return -ENOMSG;
}
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
/* asynchronous send: dummy thread waits on tx queue for receiver */
if (sending_thread->base.thread_state & _THREAD_DUMMY) {
_pend_thread(sending_thread, &mbox->tx_msg_queue, K_FOREVER);
irq_unlock(key);
return 0;
}
#endif
/* synchronous send: sender waits on tx queue for receiver or timeout */
_pend_current_thread(&mbox->tx_msg_queue, timeout);
return _Swap(key);
}
int k_mbox_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, s32_t timeout)
{
/* configure things for a synchronous send, then send the message */
tx_msg->_syncing_thread = _current;
return _mbox_message_put(mbox, tx_msg, timeout);
}
#if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0)
void k_mbox_async_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg,
struct k_sem *sem)
{
struct k_mbox_async *async;
/*
* allocate an asynchronous message descriptor, configure both parts,
* then send the message asynchronously
*/
_mbox_async_alloc(&async);
async->thread.prio = _current->base.prio;
async->tx_msg = *tx_msg;
async->tx_msg._syncing_thread = (struct k_thread *)&async->thread;
async->tx_msg._async_sem = sem;
_mbox_message_put(mbox, &async->tx_msg, K_FOREVER);
}
#endif
void k_mbox_data_get(struct k_mbox_msg *rx_msg, void *buffer)
{
/* handle case where data is to be discarded */
if (buffer == NULL) {
rx_msg->size = 0;
_mbox_message_dispose(rx_msg);
return;
}
/* copy message data to buffer, then dispose of message */
if ((rx_msg->tx_data != NULL) && (rx_msg->size > 0)) {
memcpy(buffer, rx_msg->tx_data, rx_msg->size);
}
_mbox_message_dispose(rx_msg);
}
int k_mbox_data_block_get(struct k_mbox_msg *rx_msg, struct k_mem_pool *pool,
struct k_mem_block *block, s32_t timeout)
{
int result;
/* handle case where data is to be discarded */
if (pool == NULL) {
rx_msg->size = 0;
_mbox_message_dispose(rx_msg);
return 0;
}
/* handle case where data is already in a memory pool block */
if (rx_msg->tx_block.data != NULL) {
/* give ownership of the block to receiver */
*block = rx_msg->tx_block;
rx_msg->tx_block.data = NULL;
/* now dispose of message */
_mbox_message_dispose(rx_msg);
return 0;
}
/* allocate memory pool block (even when message size is 0!) */
result = k_mem_pool_alloc(pool, block, rx_msg->size, timeout);
if (result != 0) {
return result;
}
/* retrieve non-block data into new block, then dispose of message */
k_mbox_data_get(rx_msg, block->data);
return 0;
}
/**
* @brief Handle immediate consumption of received mailbox message data.
*
* Checks to see if received message data should be kept for later retrieval,
* or if the data should consumed immediately and the message disposed of.
*
* The data is consumed immediately in either of the following cases:
* 1) The receiver requested immediate retrieval by suppling a buffer
* to receive the data.
* 2) There is no data to be retrieved. (i.e. Data size is 0 bytes.)
*
* @param rx_msg Pointer to receive message descriptor.
* @param buffer Pointer to buffer to receive data.
*
* @return 0
*/
static int _mbox_message_data_check(struct k_mbox_msg *rx_msg, void *buffer)
{
if (buffer != NULL) {
/* retrieve data now, then dispose of message */
k_mbox_data_get(rx_msg, buffer);
} else if (rx_msg->size == 0) {
/* there is no data to get, so just dispose of message */
_mbox_message_dispose(rx_msg);
} else {
/* keep message around for later data retrieval */
}
return 0;
}
int k_mbox_get(struct k_mbox *mbox, struct k_mbox_msg *rx_msg, void *buffer,
s32_t timeout)
{
struct k_thread *sending_thread, *next;
struct k_mbox_msg *tx_msg;
unsigned int key;
int result;
/* save receiver id so it can be used during message matching */
rx_msg->tx_target_thread = _current;
/* search mailbox's tx queue for a compatible sender */
key = irq_lock();
SYS_DLIST_FOR_EACH_CONTAINER_SAFE(&mbox->tx_msg_queue, sending_thread,
next, base.k_q_node) {
tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data;
if (_mbox_message_match(tx_msg, rx_msg) == 0) {
/* take sender out of mailbox's tx queue */
_unpend_thread(sending_thread);
_abort_thread_timeout(sending_thread);
irq_unlock(key);
/* consume message data immediately, if needed */
return _mbox_message_data_check(rx_msg, buffer);
}
}
/* didn't find a matching sender */
if (timeout == K_NO_WAIT) {
/* don't wait for a matching sender to appear */
irq_unlock(key);
return -ENOMSG;
}
/* wait until a matching sender appears or a timeout occurs */
_pend_current_thread(&mbox->rx_msg_queue, timeout);
_current->base.swap_data = rx_msg;
result = _Swap(key);
/* consume message data immediately, if needed */
if (result == 0) {
result = _mbox_message_data_check(rx_msg, buffer);
}
return result;
}