| /* |
| * Copyright (c) 2017 Intel Corporation |
| * Copyright (c) 2020 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| |
| #include <zephyr/net/buf.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/bluetooth/mesh.h> |
| |
| #include "common/bt_str.h" |
| |
| #include "crypto.h" |
| #include "adv.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "lpn.h" |
| #include "friend.h" |
| #include "proxy.h" |
| #include "transport.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "beacon.h" |
| #include "rpl.h" |
| #include "settings.h" |
| #include "host/ecc.h" |
| #include "prov.h" |
| |
| #define LOG_LEVEL CONFIG_BT_MESH_KEYS_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_mesh_net_keys); |
| |
| /* Tracking of what storage changes are pending for Net Keys. We track this in |
| * a separate array here instead of within the respective bt_mesh_subnet |
| * struct itself, since once a key gets deleted its struct becomes invalid |
| * and may be reused for other keys. |
| */ |
| struct net_key_update { |
| uint16_t key_idx:12, /* NetKey Index */ |
| valid:1, /* 1 if this entry is valid, 0 if not */ |
| clear:1; /* 1 if key needs clearing, 0 if storing */ |
| }; |
| |
| /* NetKey storage information */ |
| struct net_key_val { |
| uint8_t kr_flag:1, |
| kr_phase:7; |
| uint8_t val[2][16]; |
| } __packed; |
| |
| static struct net_key_update net_key_updates[CONFIG_BT_MESH_SUBNET_COUNT]; |
| |
| static struct bt_mesh_subnet subnets[CONFIG_BT_MESH_SUBNET_COUNT] = { |
| [0 ... (CONFIG_BT_MESH_SUBNET_COUNT - 1)] = { |
| .net_idx = BT_MESH_KEY_UNUSED, |
| }, |
| }; |
| |
| static void subnet_evt(struct bt_mesh_subnet *sub, enum bt_mesh_key_evt evt) |
| { |
| STRUCT_SECTION_FOREACH(bt_mesh_subnet_cb, cb) { |
| cb->evt_handler(sub, evt); |
| } |
| } |
| |
| static void clear_net_key(uint16_t net_idx) |
| { |
| char path[20]; |
| int err; |
| |
| LOG_DBG("NetKeyIndex 0x%03x", net_idx); |
| |
| snprintk(path, sizeof(path), "bt/mesh/NetKey/%x", net_idx); |
| err = settings_delete(path); |
| if (err) { |
| LOG_ERR("Failed to clear NetKeyIndex 0x%03x", net_idx); |
| } else { |
| LOG_DBG("Cleared NetKeyIndex 0x%03x", net_idx); |
| } |
| } |
| |
| static void store_subnet(uint16_t net_idx) |
| { |
| const struct bt_mesh_subnet *sub; |
| struct net_key_val key; |
| char path[20]; |
| int err; |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| LOG_WRN("NetKeyIndex 0x%03x not found", net_idx); |
| return; |
| } |
| |
| LOG_DBG("NetKeyIndex 0x%03x", net_idx); |
| |
| snprintk(path, sizeof(path), "bt/mesh/NetKey/%x", net_idx); |
| |
| memcpy(&key.val[0], sub->keys[0].net, 16); |
| memcpy(&key.val[1], sub->keys[1].net, 16); |
| key.kr_flag = 0U; /* Deprecated */ |
| key.kr_phase = sub->kr_phase; |
| |
| err = settings_save_one(path, &key, sizeof(key)); |
| if (err) { |
| LOG_ERR("Failed to store NetKey value"); |
| } else { |
| LOG_DBG("Stored NetKey value"); |
| } |
| } |
| |
| static struct net_key_update *net_key_update_find(uint16_t key_idx, |
| struct net_key_update **free_slot) |
| { |
| struct net_key_update *match; |
| int i; |
| |
| match = NULL; |
| *free_slot = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(net_key_updates); i++) { |
| struct net_key_update *update = &net_key_updates[i]; |
| |
| if (!update->valid) { |
| *free_slot = update; |
| continue; |
| } |
| |
| if (update->key_idx == key_idx) { |
| match = update; |
| } |
| } |
| |
| return match; |
| } |
| |
| uint8_t bt_mesh_net_flags(struct bt_mesh_subnet *sub) |
| { |
| uint8_t flags = 0x00; |
| |
| if (sub && (sub->kr_phase == BT_MESH_KR_PHASE_2)) { |
| flags |= BT_MESH_NET_FLAG_KR; |
| } |
| |
| if (atomic_test_bit(bt_mesh.flags, BT_MESH_IVU_IN_PROGRESS)) { |
| flags |= BT_MESH_NET_FLAG_IVU; |
| } |
| |
| return flags; |
| } |
| |
| static void update_subnet_settings(uint16_t net_idx, bool store) |
| { |
| struct net_key_update *update, *free_slot; |
| uint8_t clear = store ? 0U : 1U; |
| |
| LOG_DBG("NetKeyIndex 0x%03x", net_idx); |
| |
| update = net_key_update_find(net_idx, &free_slot); |
| if (update) { |
| update->clear = clear; |
| bt_mesh_settings_store_schedule( |
| BT_MESH_SETTINGS_NET_KEYS_PENDING); |
| return; |
| } |
| |
| if (!free_slot) { |
| if (store) { |
| store_subnet(net_idx); |
| } else { |
| clear_net_key(net_idx); |
| } |
| return; |
| } |
| |
| free_slot->valid = 1U; |
| free_slot->key_idx = net_idx; |
| free_slot->clear = clear; |
| |
| bt_mesh_settings_store_schedule(BT_MESH_SETTINGS_NET_KEYS_PENDING); |
| } |
| |
| void bt_mesh_subnet_store(uint16_t net_idx) |
| { |
| update_subnet_settings(net_idx, true); |
| } |
| |
| static void key_refresh(struct bt_mesh_subnet *sub, uint8_t new_phase) |
| { |
| LOG_DBG("Phase 0x%02x -> 0x%02x", sub->kr_phase, new_phase); |
| |
| switch (new_phase) { |
| /* Added second set of keys */ |
| case BT_MESH_KR_PHASE_1: |
| sub->kr_phase = new_phase; |
| subnet_evt(sub, BT_MESH_KEY_UPDATED); |
| break; |
| /* Now using new keys for TX */ |
| case BT_MESH_KR_PHASE_2: |
| sub->kr_phase = new_phase; |
| subnet_evt(sub, BT_MESH_KEY_SWAPPED); |
| break; |
| /* Revoking keys */ |
| case BT_MESH_KR_PHASE_3: |
| if (sub->kr_phase == BT_MESH_KR_NORMAL) { |
| return; |
| } |
| __fallthrough; |
| case BT_MESH_KR_NORMAL: |
| sub->kr_phase = BT_MESH_KR_NORMAL; |
| memcpy(&sub->keys[0], &sub->keys[1], sizeof(sub->keys[0])); |
| sub->keys[1].valid = 0U; |
| subnet_evt(sub, BT_MESH_KEY_REVOKED); |
| break; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| LOG_DBG("Storing Updated NetKey persistently"); |
| bt_mesh_subnet_store(sub->net_idx); |
| } |
| } |
| |
| void bt_mesh_kr_update(struct bt_mesh_subnet *sub, bool kr_flag, bool new_key) |
| { |
| if (!new_key) { |
| return; |
| } |
| |
| if (sub->kr_phase == BT_MESH_KR_PHASE_1) { |
| /* Bluetooth Mesh Profile Specification Section 3.10.4.1: |
| * Can skip phase 2 if we get KR=0 on new key. |
| */ |
| key_refresh(sub, (kr_flag ? BT_MESH_KR_PHASE_2 : |
| BT_MESH_KR_PHASE_3)); |
| } else if (sub->kr_phase == BT_MESH_KR_PHASE_2 && !kr_flag) { |
| key_refresh(sub, BT_MESH_KR_PHASE_3); |
| } |
| } |
| |
| static struct bt_mesh_subnet *subnet_alloc(uint16_t net_idx) |
| { |
| struct bt_mesh_subnet *sub = NULL; |
| |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++) { |
| /* Check for already existing subnet */ |
| if (subnets[i].net_idx == net_idx) { |
| return &subnets[i]; |
| } |
| |
| if (!sub && subnets[i].net_idx == BT_MESH_KEY_UNUSED) { |
| sub = &subnets[i]; |
| } |
| } |
| |
| return sub; |
| } |
| |
| static void subnet_del(struct bt_mesh_subnet *sub) |
| { |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| update_subnet_settings(sub->net_idx, false); |
| } |
| |
| bt_mesh_net_loopback_clear(sub->net_idx); |
| |
| subnet_evt(sub, BT_MESH_KEY_DELETED); |
| (void)memset(sub, 0, sizeof(*sub)); |
| sub->net_idx = BT_MESH_KEY_UNUSED; |
| } |
| |
| static int msg_cred_create(struct bt_mesh_net_cred *cred, const uint8_t *p, |
| size_t p_len, const uint8_t key[16]) |
| { |
| return bt_mesh_k2(key, p, p_len, &cred->nid, cred->enc, cred->privacy); |
| } |
| |
| static int net_keys_create(struct bt_mesh_subnet_keys *keys, |
| const uint8_t key[16]) |
| { |
| uint8_t p = 0; |
| int err; |
| |
| err = msg_cred_create(&keys->msg, &p, 1, key); |
| if (err) { |
| LOG_ERR("Unable to generate NID, EncKey & PrivacyKey"); |
| return err; |
| } |
| |
| memcpy(keys->net, key, 16); |
| |
| LOG_DBG("NID 0x%02x EncKey %s", keys->msg.nid, bt_hex(keys->msg.enc, 16)); |
| LOG_DBG("PrivacyKey %s", bt_hex(keys->msg.privacy, 16)); |
| |
| err = bt_mesh_k3(key, keys->net_id); |
| if (err) { |
| LOG_ERR("Unable to generate Net ID"); |
| return err; |
| } |
| |
| LOG_DBG("NetID %s", bt_hex(keys->net_id, 8)); |
| |
| #if defined(CONFIG_BT_MESH_GATT_PROXY) |
| err = bt_mesh_identity_key(key, keys->identity); |
| if (err) { |
| LOG_ERR("Unable to generate IdentityKey"); |
| return err; |
| } |
| |
| LOG_DBG("IdentityKey %s", bt_hex(keys->identity, 16)); |
| #endif /* GATT_PROXY */ |
| |
| err = bt_mesh_beacon_key(key, keys->beacon); |
| if (err) { |
| LOG_ERR("Unable to generate beacon key"); |
| return err; |
| } |
| |
| LOG_DBG("BeaconKey %s", bt_hex(keys->beacon, 16)); |
| |
| keys->valid = 1U; |
| |
| return 0; |
| } |
| |
| uint8_t bt_mesh_subnet_add(uint16_t net_idx, const uint8_t key[16]) |
| { |
| struct bt_mesh_subnet *sub = NULL; |
| int err; |
| |
| LOG_DBG("0x%03x", net_idx); |
| |
| sub = subnet_alloc(net_idx); |
| if (!sub) { |
| return STATUS_INSUFF_RESOURCES; |
| } |
| |
| if (sub->net_idx == net_idx) { |
| if (memcmp(key, sub->keys[0].net, 16)) { |
| return STATUS_IDX_ALREADY_STORED; |
| } |
| |
| return STATUS_SUCCESS; |
| } |
| |
| err = net_keys_create(&sub->keys[0], key); |
| if (err) { |
| return STATUS_UNSPECIFIED; |
| } |
| |
| sub->net_idx = net_idx; |
| sub->kr_phase = BT_MESH_KR_NORMAL; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { |
| sub->node_id = BT_MESH_NODE_IDENTITY_STOPPED; |
| } else { |
| sub->node_id = BT_MESH_NODE_IDENTITY_NOT_SUPPORTED; |
| } |
| |
| subnet_evt(sub, BT_MESH_KEY_ADDED); |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| LOG_DBG("Storing NetKey persistently"); |
| bt_mesh_subnet_store(sub->net_idx); |
| } |
| |
| return STATUS_SUCCESS; |
| } |
| |
| bool bt_mesh_subnet_exists(uint16_t net_idx) |
| { |
| return !!bt_mesh_subnet_get(net_idx); |
| } |
| |
| uint8_t bt_mesh_subnet_update(uint16_t net_idx, const uint8_t key[16]) |
| { |
| struct bt_mesh_subnet *sub; |
| int err; |
| |
| LOG_DBG("0x%03x", net_idx); |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| /* The node shall successfully process a NetKey Update message on a |
| * valid NetKeyIndex when the NetKey value is different and the Key |
| * Refresh procedure has not been started, or when the NetKey value is |
| * the same in Phase 1. The NetKey Update message shall generate an |
| * error when the node is in Phase 2, or Phase 3. |
| */ |
| switch (sub->kr_phase) { |
| case BT_MESH_KR_NORMAL: |
| if (!memcmp(key, sub->keys[0].net, 16)) { |
| return STATUS_IDX_ALREADY_STORED; |
| } |
| break; |
| case BT_MESH_KR_PHASE_1: |
| if (!memcmp(key, sub->keys[1].net, 16)) { |
| return STATUS_SUCCESS; |
| } |
| __fallthrough; |
| case BT_MESH_KR_PHASE_2: |
| case BT_MESH_KR_PHASE_3: |
| return STATUS_CANNOT_UPDATE; |
| } |
| |
| err = net_keys_create(&sub->keys[1], key); |
| if (err) { |
| return STATUS_CANNOT_UPDATE; |
| } |
| |
| key_refresh(sub, BT_MESH_KR_PHASE_1); |
| |
| return STATUS_SUCCESS; |
| } |
| |
| uint8_t bt_mesh_subnet_del(uint16_t net_idx) |
| { |
| struct bt_mesh_subnet *sub; |
| |
| LOG_DBG("0x%03x", net_idx); |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| /* This could be a retry of a previous attempt that had its |
| * response lost, so pretend that it was a success. |
| */ |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| subnet_del(sub); |
| |
| return STATUS_SUCCESS; |
| } |
| |
| int bt_mesh_friend_cred_create(struct bt_mesh_net_cred *cred, uint16_t lpn_addr, |
| uint16_t frnd_addr, uint16_t lpn_counter, |
| uint16_t frnd_counter, const uint8_t key[16]) |
| { |
| uint8_t p[9]; |
| |
| p[0] = 0x01; |
| sys_put_be16(lpn_addr, p + 1); |
| sys_put_be16(frnd_addr, p + 3); |
| sys_put_be16(lpn_counter, p + 5); |
| sys_put_be16(frnd_counter, p + 7); |
| |
| return msg_cred_create(cred, p, sizeof(p), key); |
| } |
| |
| uint8_t bt_mesh_subnet_kr_phase_set(uint16_t net_idx, uint8_t *phase) |
| { |
| /* Table in Bluetooth Mesh Profile Specification Section 4.2.14: */ |
| const uint8_t valid_transitions[] = { |
| BIT(BT_MESH_KR_PHASE_3), /* Normal phase: KR is started by key update */ |
| BIT(BT_MESH_KR_PHASE_2) | BIT(BT_MESH_KR_PHASE_3), /* Phase 1 */ |
| BIT(BT_MESH_KR_PHASE_3), /* Phase 2 */ |
| /* Subnet is never in Phase 3 */ |
| }; |
| struct bt_mesh_subnet *sub; |
| |
| LOG_DBG("0x%03x", net_idx); |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| *phase = 0x00; |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| if (*phase == sub->kr_phase) { |
| return STATUS_SUCCESS; |
| } |
| |
| if (sub->kr_phase < ARRAY_SIZE(valid_transitions) && |
| valid_transitions[sub->kr_phase] & BIT(*phase)) { |
| key_refresh(sub, *phase); |
| |
| *phase = sub->kr_phase; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| LOG_WRN("Invalid KR transition: 0x%02x -> 0x%02x", sub->kr_phase, *phase); |
| |
| *phase = sub->kr_phase; |
| |
| return STATUS_CANNOT_UPDATE; |
| } |
| |
| uint8_t bt_mesh_subnet_kr_phase_get(uint16_t net_idx, uint8_t *phase) |
| { |
| struct bt_mesh_subnet *sub; |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| *phase = BT_MESH_KR_NORMAL; |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| *phase = sub->kr_phase; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| uint8_t bt_mesh_subnet_node_id_set(uint16_t net_idx, |
| enum bt_mesh_feat_state node_id) |
| { |
| struct bt_mesh_subnet *sub; |
| |
| if (node_id == BT_MESH_FEATURE_NOT_SUPPORTED) { |
| return STATUS_CANNOT_SET; |
| } |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| if (!IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { |
| return STATUS_FEAT_NOT_SUPP; |
| } |
| |
| if (node_id) { |
| bt_mesh_proxy_identity_start(sub); |
| } else { |
| bt_mesh_proxy_identity_stop(sub); |
| } |
| |
| bt_mesh_adv_gatt_update(); |
| |
| return STATUS_SUCCESS; |
| } |
| |
| uint8_t bt_mesh_subnet_node_id_get(uint16_t net_idx, |
| enum bt_mesh_feat_state *node_id) |
| { |
| struct bt_mesh_subnet *sub; |
| |
| sub = bt_mesh_subnet_get(net_idx); |
| if (!sub) { |
| *node_id = 0x00; |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| *node_id = sub->node_id; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| ssize_t bt_mesh_subnets_get(uint16_t net_idxs[], size_t max, off_t skip) |
| { |
| size_t count = 0; |
| |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++) { |
| struct bt_mesh_subnet *sub = &subnets[i]; |
| |
| if (sub->net_idx == BT_MESH_KEY_UNUSED) { |
| continue; |
| } |
| |
| if (skip) { |
| skip--; |
| continue; |
| } |
| |
| if (count >= max) { |
| return -ENOMEM; |
| } |
| |
| net_idxs[count++] = sub->net_idx; |
| } |
| |
| return count; |
| } |
| |
| struct bt_mesh_subnet *bt_mesh_subnet_get(uint16_t net_idx) |
| { |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++) { |
| struct bt_mesh_subnet *sub = &subnets[i]; |
| |
| if (sub->net_idx == net_idx) { |
| return sub; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| int bt_mesh_subnet_set(uint16_t net_idx, uint8_t kr_phase, |
| const uint8_t old_key[16], const uint8_t new_key[16]) |
| { |
| const uint8_t *keys[] = { old_key, new_key }; |
| struct bt_mesh_subnet *sub; |
| |
| sub = subnet_alloc(net_idx); |
| if (!sub) { |
| return -ENOMEM; |
| } |
| |
| if (sub->net_idx == net_idx) { |
| return -EALREADY; |
| } |
| |
| for (int i = 0; i < ARRAY_SIZE(keys); i++) { |
| if (!keys[i]) { |
| continue; |
| } |
| |
| if (net_keys_create(&sub->keys[i], keys[i])) { |
| return -EIO; |
| } |
| } |
| |
| sub->net_idx = net_idx; |
| sub->kr_phase = kr_phase; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { |
| sub->node_id = BT_MESH_NODE_IDENTITY_STOPPED; |
| } else { |
| sub->node_id = BT_MESH_NODE_IDENTITY_NOT_SUPPORTED; |
| } |
| |
| /* Make sure we have valid beacon data to be sent */ |
| bt_mesh_beacon_update(sub); |
| |
| return 0; |
| } |
| |
| struct bt_mesh_subnet *bt_mesh_subnet_find(bool (*cb)(struct bt_mesh_subnet *sub, void *cb_data), |
| void *cb_data) |
| { |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++) { |
| if (subnets[i].net_idx == BT_MESH_KEY_UNUSED) { |
| continue; |
| } |
| |
| if (!cb || cb(&subnets[i], cb_data)) { |
| return &subnets[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| size_t bt_mesh_subnet_foreach(void (*cb)(struct bt_mesh_subnet *sub)) |
| { |
| size_t count = 0; |
| |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++) { |
| if (subnets[i].net_idx == BT_MESH_KEY_UNUSED) { |
| continue; |
| } |
| |
| cb(&subnets[i]); |
| count++; |
| } |
| |
| return count; |
| } |
| |
| struct bt_mesh_subnet *bt_mesh_subnet_next(struct bt_mesh_subnet *sub) |
| { |
| if (sub) { |
| sub++; |
| } else { |
| sub = &subnets[0]; |
| } |
| |
| for (int i = 0; i < ARRAY_SIZE(subnets); i++, sub++) { |
| /* Roll over once we reach the end */ |
| if (sub == &subnets[ARRAY_SIZE(subnets)]) { |
| sub = &subnets[0]; |
| } |
| |
| if (sub->net_idx != BT_MESH_KEY_UNUSED) { |
| return sub; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void bt_mesh_net_keys_reset(void) |
| { |
| int i; |
| |
| /* Delete all net keys, which also takes care of all app keys which |
| * are associated with each net key. |
| */ |
| for (i = 0; i < ARRAY_SIZE(subnets); i++) { |
| struct bt_mesh_subnet *sub = &subnets[i]; |
| |
| if (sub->net_idx != BT_MESH_KEY_UNUSED) { |
| subnet_del(sub); |
| } |
| } |
| } |
| |
| bool bt_mesh_net_cred_find(struct bt_mesh_net_rx *rx, struct net_buf_simple *in, |
| struct net_buf_simple *out, |
| bool (*cb)(struct bt_mesh_net_rx *rx, |
| struct net_buf_simple *in, |
| struct net_buf_simple *out, |
| const struct bt_mesh_net_cred *cred)) |
| { |
| int i, j; |
| |
| LOG_DBG(""); |
| |
| #if defined(CONFIG_BT_MESH_LOW_POWER) |
| if (bt_mesh_lpn_waiting_update()) { |
| rx->sub = bt_mesh.lpn.sub; |
| |
| for (j = 0; j < ARRAY_SIZE(bt_mesh.lpn.cred); j++) { |
| if (!rx->sub->keys[j].valid) { |
| continue; |
| } |
| |
| if (cb(rx, in, out, &bt_mesh.lpn.cred[j])) { |
| rx->new_key = (j > 0); |
| rx->friend_cred = 1U; |
| rx->ctx.net_idx = rx->sub->net_idx; |
| return true; |
| } |
| } |
| |
| /* LPN Should only receive on the friendship credentials when in |
| * a friendship. |
| */ |
| return false; |
| } |
| #endif |
| |
| #if defined(CONFIG_BT_MESH_FRIEND) |
| /** Each friendship has unique friendship credentials */ |
| for (i = 0; i < ARRAY_SIZE(bt_mesh.frnd); i++) { |
| struct bt_mesh_friend *frnd = &bt_mesh.frnd[i]; |
| |
| if (!frnd->subnet) { |
| continue; |
| } |
| |
| rx->sub = frnd->subnet; |
| |
| for (j = 0; j < ARRAY_SIZE(frnd->cred); j++) { |
| if (!rx->sub->keys[j].valid) { |
| continue; |
| } |
| |
| if (cb(rx, in, out, &frnd->cred[j])) { |
| rx->new_key = (j > 0); |
| rx->friend_cred = 1U; |
| rx->ctx.net_idx = rx->sub->net_idx; |
| return true; |
| } |
| } |
| } |
| #endif |
| |
| for (i = 0; i < ARRAY_SIZE(subnets); i++) { |
| rx->sub = &subnets[i]; |
| if (rx->sub->net_idx == BT_MESH_KEY_UNUSED) { |
| continue; |
| } |
| |
| for (j = 0; j < ARRAY_SIZE(rx->sub->keys); j++) { |
| if (!rx->sub->keys[j].valid) { |
| continue; |
| } |
| |
| if (cb(rx, in, out, &rx->sub->keys[j].msg)) { |
| rx->new_key = (j > 0); |
| rx->friend_cred = 0U; |
| rx->ctx.net_idx = rx->sub->net_idx; |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| static int net_key_set(const char *name, size_t len_rd, |
| settings_read_cb read_cb, void *cb_arg) |
| { |
| struct net_key_val key; |
| int err; |
| uint16_t net_idx; |
| |
| if (!name) { |
| LOG_ERR("Insufficient number of arguments"); |
| return -ENOENT; |
| } |
| |
| net_idx = strtol(name, NULL, 16); |
| err = bt_mesh_settings_set(read_cb, cb_arg, &key, sizeof(key)); |
| if (err) { |
| LOG_ERR("Failed to set \'net-key\'"); |
| return err; |
| } |
| |
| LOG_DBG("NetKeyIndex 0x%03x recovered from storage", net_idx); |
| |
| return bt_mesh_subnet_set( |
| net_idx, key.kr_phase, key.val[0], |
| (key.kr_phase != BT_MESH_KR_NORMAL) ? key.val[1] : NULL); |
| } |
| |
| BT_MESH_SETTINGS_DEFINE(subnet, "NetKey", net_key_set); |
| |
| void bt_mesh_subnet_pending_store(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(net_key_updates); i++) { |
| struct net_key_update *update = &net_key_updates[i]; |
| |
| if (!update->valid) { |
| continue; |
| } |
| |
| if (update->clear) { |
| clear_net_key(update->key_idx); |
| } else { |
| store_subnet(update->key_idx); |
| } |
| |
| update->valid = 0U; |
| } |
| } |