| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT altr_nios2_i2c |
| |
| #include <errno.h> |
| #include <drivers/i2c.h> |
| #include <soc.h> |
| #include <sys/util.h> |
| #include <altera_common.h> |
| #include "altera_avalon_i2c.h" |
| |
| #define LOG_LEVEL CONFIG_I2C_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(i2c_nios2); |
| |
| #define NIOS2_I2C_TIMEOUT_USEC 1000 |
| |
| struct i2c_nios2_config { |
| ALT_AVALON_I2C_DEV_t i2c_dev; |
| IRQ_DATA_t irq_data; |
| struct k_sem sem_lock; |
| }; |
| |
| static int i2c_nios2_configure(const struct device *dev, uint32_t dev_config) |
| { |
| struct i2c_nios2_config *config = (struct i2c_nios2_config *)dev->config; |
| int32_t rc = 0; |
| |
| k_sem_take(&config->sem_lock, K_FOREVER); |
| if (!(I2C_MODE_MASTER & dev_config)) { |
| LOG_ERR("i2c config mode error\n"); |
| rc = -EINVAL; |
| goto i2c_cfg_err; |
| } |
| |
| if (I2C_ADDR_10_BITS & dev_config) { |
| LOG_ERR("i2c config addressing error\n"); |
| rc = -EINVAL; |
| goto i2c_cfg_err; |
| } |
| |
| if (I2C_SPEED_GET(dev_config) != I2C_SPEED_STANDARD) { |
| LOG_ERR("i2c config speed error\n"); |
| rc = -EINVAL; |
| goto i2c_cfg_err; |
| } |
| |
| alt_avalon_i2c_init(&config->i2c_dev); |
| |
| i2c_cfg_err: |
| k_sem_give(&config->sem_lock); |
| return rc; |
| } |
| |
| static int i2c_nios2_transfer(const struct device *dev, struct i2c_msg *msgs, |
| uint8_t num_msgs, uint16_t addr) |
| { |
| struct i2c_nios2_config *config = (struct i2c_nios2_config *)dev->config; |
| ALT_AVALON_I2C_STATUS_CODE status; |
| uint32_t restart, stop; |
| int32_t i, timeout, rc = 0; |
| |
| k_sem_take(&config->sem_lock, K_FOREVER); |
| /* register the optional interrupt callback */ |
| alt_avalon_i2c_register_optional_irq_handler( |
| &config->i2c_dev, &config->irq_data); |
| |
| /* Iterate over all the messages */ |
| for (i = 0; i < num_msgs; i++) { |
| |
| /* convert restart flag */ |
| if (msgs->flags & I2C_MSG_RESTART) { |
| restart = ALT_AVALON_I2C_RESTART; |
| } else { |
| restart = ALT_AVALON_I2C_NO_RESTART; |
| } |
| |
| /* convert stop flag */ |
| if (msgs->flags & I2C_MSG_STOP) { |
| stop = ALT_AVALON_I2C_STOP; |
| } else { |
| stop = ALT_AVALON_I2C_NO_STOP; |
| } |
| |
| /* Set the slave device address */ |
| alt_avalon_i2c_master_target_set(&config->i2c_dev, addr); |
| |
| /* Start the transfer */ |
| if (msgs->flags & I2C_MSG_READ) { |
| status = alt_avalon_i2c_master_receive_using_interrupts( |
| &config->i2c_dev, |
| msgs->buf, msgs->len, |
| restart, stop); |
| } else { |
| status = alt_avalon_i2c_master_transmit_using_interrupts |
| (&config->i2c_dev, |
| msgs->buf, msgs->len, |
| restart, stop); |
| } |
| |
| /* Return an error if the transfer didn't |
| * start successfully e.g., if the bus was busy |
| */ |
| if (status != ALT_AVALON_I2C_SUCCESS) { |
| LOG_ERR("i2c transfer error %lu\n", status); |
| rc = -EIO; |
| goto i2c_transfer_err; |
| } |
| |
| timeout = NIOS2_I2C_TIMEOUT_USEC; |
| while (timeout) { |
| k_busy_wait(1); |
| status = alt_avalon_i2c_interrupt_transaction_status( |
| &config->i2c_dev); |
| if (status == ALT_AVALON_I2C_SUCCESS) { |
| break; |
| } |
| timeout--; |
| } |
| |
| if (timeout <= 0) { |
| LOG_ERR("i2c busy or timeout error %lu\n", status); |
| rc = -EIO; |
| goto i2c_transfer_err; |
| } |
| |
| /* move to the next message */ |
| msgs++; |
| } |
| |
| i2c_transfer_err: |
| alt_avalon_i2c_disable(&config->i2c_dev); |
| k_sem_give(&config->sem_lock); |
| return rc; |
| } |
| |
| static void i2c_nios2_isr(const struct device *dev) |
| { |
| struct i2c_nios2_config *config = (struct i2c_nios2_config *)dev->config; |
| |
| /* Call Altera HAL driver ISR */ |
| alt_handle_irq(&config->i2c_dev, DT_INST_IRQN(0)); |
| } |
| |
| static int i2c_nios2_init(const struct device *dev); |
| |
| static struct i2c_driver_api i2c_nios2_driver_api = { |
| .configure = i2c_nios2_configure, |
| .transfer = i2c_nios2_transfer, |
| }; |
| |
| static struct i2c_nios2_config i2c_nios2_cfg = { |
| .i2c_dev = { |
| .i2c_base = (alt_u32 *)DT_INST_REG_ADDR(0), |
| .irq_controller_ID = I2C_0_IRQ_INTERRUPT_CONTROLLER_ID, |
| .irq_ID = DT_INST_IRQN(0), |
| .ip_freq_in_hz = DT_INST_PROP(0, clock_frequency), |
| }, |
| }; |
| |
| I2C_DEVICE_DT_INST_DEFINE(0, i2c_nios2_init, NULL, |
| NULL, &i2c_nios2_cfg, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &i2c_nios2_driver_api); |
| |
| static int i2c_nios2_init(const struct device *dev) |
| { |
| struct i2c_nios2_config *config = (struct i2c_nios2_config *)dev->config; |
| int rc; |
| |
| /* initialize semaphore */ |
| k_sem_init(&config->sem_lock, 1, 1); |
| |
| rc = i2c_nios2_configure(dev, |
| I2C_MODE_MASTER | |
| I2C_SPEED_SET(I2C_SPEED_STANDARD)); |
| if (rc) { |
| LOG_ERR("i2c configure failed %d\n", rc); |
| return rc; |
| } |
| |
| /* clear ISR register content */ |
| alt_avalon_i2c_int_clear(&config->i2c_dev, |
| ALT_AVALON_I2C_ISR_ALL_CLEARABLE_INTS_MSK); |
| IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), |
| i2c_nios2_isr, DEVICE_DT_INST_GET(0), 0); |
| irq_enable(DT_INST_IRQN(0)); |
| return 0; |
| } |