| /* |
| * Copyright (c) 2022-2024 PHYTEC Messtechnik GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <nxp/nxp_imx/mimx8mm6dvtlz-pinctrl.dtsi> |
| |
| &pinctrl { |
| uart4_default: uart4_default { |
| group0 { |
| pinmux = <&iomuxc_uart4_rxd_uart_rx_uart4_rx>, |
| <&iomuxc_uart4_txd_uart_tx_uart4_tx>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| }; |
| }; |
| |
| uart3_default: uart3_default { |
| group0 { |
| pinmux = <&iomuxc_uart3_rxd_uart_rx_uart3_rx>, |
| <&iomuxc_uart3_txd_uart_tx_uart3_tx>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| }; |
| }; |
| |
| uart2_default: uart2_default { |
| group0 { |
| pinmux = <&iomuxc_sai3_rxd_uart_cts_b_uart2_rts_b>, |
| <&iomuxc_sai3_rxd_uart_rts_b_uart2_rts_b>, |
| <&iomuxc_sai3_txfs_uart_tx_uart2_rx>, |
| <&iomuxc_sai3_txc_uart_rx_uart2_tx>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| }; |
| }; |
| |
| uart1_default: uart1_default { |
| group0 { |
| pinmux = <&iomuxc_sai2_rxfs_uart_rx_uart1_tx>, |
| <&iomuxc_sai2_rxc_uart_rx_uart1_rx>, |
| <&iomuxc_sai2_rxd0_uart_rts_b_uart1_rts_b>, |
| <&iomuxc_sai2_txfs_uart_cts_b_uart1_cts_b>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| }; |
| }; |
| |
| ecspi1_default: ecspi1_default { |
| group1 { |
| pinmux = <&iomuxc_ecspi1_miso_ecspi_miso_ecspi1_miso>, |
| <&iomuxc_ecspi1_mosi_ecspi_mosi_ecspi1_mosi>, |
| <&iomuxc_ecspi1_sclk_ecspi_sclk_ecspi1_sclk>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| }; |
| group2 { |
| pinmux = <&iomuxc_ecspi1_ss0_gpio_io_gpio5_io09>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| bias-pull-up; |
| }; |
| group3 { |
| pinmux = <&iomuxc_sd2_wp_gpio_io_gpio2_io20>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| bias-pull-up; |
| }; |
| }; |
| |
| ecspi2_default: ecspi2_default { |
| group1 { |
| pinmux = <&iomuxc_ecspi2_miso_ecspi_miso_ecspi2_miso>, |
| <&iomuxc_ecspi2_mosi_ecspi_mosi_ecspi2_mosi>, |
| <&iomuxc_ecspi2_sclk_ecspi_sclk_ecspi2_sclk>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| bias-pull-up; |
| }; |
| group2 { |
| pinmux = <&iomuxc_ecspi2_ss0_gpio_io_gpio5_io13>; |
| slew-rate = "fast"; |
| drive-strength = "x6"; |
| bias-pull-up; |
| }; |
| }; |
| }; |