| # SPDX-License-Identifier: Apache-2.0 |
| if(CONFIG_BUILD_WITH_TFM) |
| set(TFM_FLASH_BASE_ADDRESS 0x0C000000) |
| |
| # Flash merged TF-M + Zephyr binary |
| set_property(TARGET runners_yaml_props_target PROPERTY hex_file tfm_merged.hex) |
| |
| if (CONFIG_HAS_FLASH_LOAD_OFFSET) |
| MATH(EXPR TFM_HEX_BASE_ADDRESS_NS "${TFM_FLASH_BASE_ADDRESS}+${CONFIG_FLASH_LOAD_OFFSET}") |
| else() |
| set(TFM_HEX_BASE_ADDRESS_NS ${TFM_TFM_FLASH_BASE_ADDRESS}) |
| endif() |
| endif() |
| |
| # keep first |
| if(CONFIG_STM32_MEMMAP) |
| board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw") |
| board_runner_args(stm32cubeprogrammer "--extload=MX25LM51245G_STM32U585I-IOT02A.stldr") |
| else() |
| board_runner_args(stm32cubeprogrammer "--erase" "--port=swd" "--reset-mode=hw") |
| endif() |
| |
| board_runner_args(openocd "--tcl-port=6666") |
| board_runner_args(openocd --cmd-pre-init "gdb_report_data_abort enable") |
| board_runner_args(openocd "--no-halt") |
| |
| board_runner_args(jlink "--device=STM32U585AI" "--reset-after-load") |
| |
| # keep first |
| include(${ZEPHYR_BASE}/boards/common/stm32cubeprogrammer.board.cmake) |
| # FIXME: openocd runner requires use of STMicro openocd fork. |
| # Check board documentation for more details. |
| include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake) |
| include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake) |
