| # Ethernet PHY drivers configuration options |
| |
| # Copyright (c) 2021 IP-Logix Inc. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig ETH_PHY_DRIVER |
| bool "Ethernet PHY drivers" |
| default y if NET_L2_ETHERNET || ETH_DRIVER |
| |
| if ETH_PHY_DRIVER |
| |
| module = PHY |
| module-dep = LOG |
| module-str = Log level for Ethernet PHY driver |
| module-help = Sets log level for Ethernet PHY Device Drivers. |
| source "subsys/net/Kconfig.template.log_config.net" |
| source "drivers/ethernet/phy/Kconfig.tja1103" |
| |
| config PHY_INIT_PRIORITY |
| int "Ethernet PHY driver init priority" |
| default 70 |
| help |
| Ethernet PHY device driver initialization priority. |
| Do not mess with it unless you know what you are doing. |
| Note that the priority needs to be lower than the net stack |
| so that it can start before the networking sub-system. |
| |
| config PHY_GENERIC_MII |
| bool "Generic MII PHY Driver" |
| default y if DT_HAS_ETHERNET_PHY_ENABLED |
| depends on MDIO |
| help |
| This is a generic MII PHY interface that communicates with the |
| PHY using the MDIO bus. |
| |
| config PHY_ADIN2111 |
| bool "ADIN2111 PHY driver" |
| default y |
| depends on DT_HAS_ADI_ADIN2111_PHY_ENABLED || DT_HAS_ADI_ADIN1100_PHY_ENABLED |
| help |
| Enable ADIN2111 PHY driver. |
| |
| config PHY_MICROCHIP_KSZ8081 |
| bool "Microchip KSZ8081 PHY Driver" |
| default y |
| depends on DT_HAS_MICROCHIP_KSZ8081_ENABLED |
| depends on MDIO |
| depends on GPIO |
| help |
| Enable Microchip KSZ8081 Ethernet PHY Driver |
| |
| config PHY_TI_DP83825 |
| bool "TI DP83825 PHY Driver" |
| default y |
| depends on DT_HAS_TI_DP83825_ENABLED |
| depends on MDIO |
| depends on GPIO |
| help |
| Enable TI DP83825 Ethernet PHY Driver |
| |
| config PHY_REALTEK_RTL8211F |
| bool "Realtek RTL8211F PHY Driver" |
| default y |
| depends on DT_HAS_REALTEK_RTL8211F_ENABLED |
| depends on MDIO |
| depends on GPIO || (!$(dt_compat_any_has_prop,$(DT_COMPAT_REALTEK_RTL8211F),reset-gpios) && \ |
| !$(dt_compat_any_has_prop,$(DT_COMPAT_REALTEK_RTL8211F),int-gpios)) |
| help |
| Enable Realtek RTL8211F Ethernet PHY Driver |
| |
| config PHY_QUALCOMM_AR8031 |
| bool "Qualcomm Atheros AR8031 Ethernet PHY Driver" |
| default y |
| depends on DT_HAS_QCA_AR8031_ENABLED |
| depends on MDIO |
| help |
| Enable Qualcomm Atheros AR8031 Ethernet PHY Driver |
| |
| config PHY_AUTONEG_TIMEOUT_MS |
| int "Auto-negotiation timeout value in milliseconds" |
| default 4000 |
| help |
| Maximum duration of auto-negotiation sequence in milliseconds |
| before the process fails |
| |
| config PHY_MONITOR_PERIOD |
| int "Monitor task execution period" |
| default 500 |
| help |
| Monitor task execution period in milliseconds. The monitor task is |
| periodically executed to detect and report any changes in the |
| PHY link status to the operating system. |
| |
| endif # "Ethernet PHY Drivers" |