| /* |
| * Copyright (c) 2020, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nxp/nxp_rt1024.dtsi> |
| #include "mimxrt1024_evk-pinctrl.dtsi" |
| |
| / { |
| model = "NXP MIMXRT1024-EVK board"; |
| compatible = "nxp,mimxrt1024"; |
| |
| aliases { |
| led0 = &green_led; |
| sw0 = &user_button; |
| watchdog0 = &wdog0; |
| magn0 = &fxos8700; |
| accel0 = &fxos8700; |
| sdhc0 = &usdhc1; |
| }; |
| |
| chosen { |
| zephyr,flash-controller = &w25q32jvwj0; |
| zephyr,flash = &w25q32jvwj0; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,sram = &sdram0; |
| zephyr,itcm = &itcm; |
| zephyr,dtcm = &dtcm; |
| zephyr,console = &lpuart1; |
| zephyr,shell-uart = &lpuart1; |
| zephyr,canbus = &flexcan1; |
| }; |
| |
| sdram0: memory@80000000 { |
| /* ISSI IS42S16160J-6TLI */ |
| device_type = "memory"; |
| reg = <0x80000000 DT_SIZE_M(32)>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| green_led: led-1 { |
| gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| label = "User LD1"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button: button-1 { |
| label = "User SW4"; |
| gpios = <&gpio5 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| }; |
| }; |
| }; |
| |
| &w25q32jvwj0 { |
| status = "okay"; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 DT_SIZE_K(64)>; |
| }; |
| |
| slot0_partition: partition@10000 { |
| label = "image-0"; |
| reg = <0x00010000 DT_SIZE_K(1920)>; |
| }; |
| |
| slot1_partition: partition@1f0000 { |
| label = "image-1"; |
| reg = <0x001F0000 DT_SIZE_K(1920)>; |
| }; |
| |
| storage_partition: partition@3d0000 { |
| label = "storage"; |
| reg = <0x003D0000 DT_SIZE_K(128)>; |
| }; |
| |
| scratch_partition: partition@3f0000 { |
| label = "image-scratch"; |
| reg = <0x003f0000 DT_SIZE_K(64)>; |
| }; |
| }; |
| }; |
| |
| &enet { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_enet>; |
| pinctrl-names = "default"; |
| int-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| ptp { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_ptp>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &lpuart1 { |
| status = "okay"; |
| current-speed = <115200>; |
| pinctrl-0 = <&pinmux_lpuart1>; |
| pinctrl-1 = <&pinmux_lpuart1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &lpuart2 { |
| pinctrl-0 = <&pinmux_lpuart2>; |
| pinctrl-1 = <&pinmux_lpuart2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &flexcan1 { |
| status = "okay"; |
| bus-speed = <125000>; |
| pinctrl-0 = <&pinmux_flexcan1>; |
| pinctrl-names = "default"; |
| |
| can-transceiver { |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| &wdog0 { |
| status = "okay"; |
| }; |
| |
| &lpi2c4 { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_lpi2c4>; |
| pinctrl-names = "default"; |
| scl-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| |
| fxos8700: fxos8700@1f { |
| compatible = "nxp,fxos8700"; |
| reg = <0x1f>; |
| }; |
| }; |
| |
| &edma0 { |
| status = "okay"; |
| }; |
| |
| &lpspi1 { |
| status = "okay"; |
| /* DMA channels 0 and 1, muxed to LPSPI1 RX and TX */ |
| dmas = <&edma0 0 13>, <&edma0 1 14>; |
| dma-names = "rx", "tx"; |
| pinctrl-0 = <&pinmux_lpspi1>; |
| pinctrl-names = "default"; |
| }; |
| |
| &adc1 { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_adc1>; |
| pinctrl-names = "default"; |
| }; |
| |
| /* GPT and Systick are enabled. If power management is enabled, the GPT |
| * timer will be used instead of systick, as allows the core clock to |
| * be gated. |
| */ |
| &gpt_hw_timer { |
| status = "okay"; |
| }; |
| |
| &systick { |
| status = "okay"; |
| }; |
| |
| zephyr_udc0: &usb1 { |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_usdhc1>; |
| pinctrl-1 = <&pinmux_usdhc1_slow>; |
| pinctrl-2 = <&pinmux_usdhc1_med>; |
| pinctrl-3 = <&pinmux_usdhc1_fast>; |
| pinctrl-names = "default", "slow", "med", "fast"; |
| cd-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| pwr-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| no-1-8-v; |
| sdmmc { |
| compatible = "zephyr,sdmmc-disk"; |
| status = "okay"; |
| }; |
| }; |