| .. _x-nucleo-iks02a1-shub-sample: |
| |
| X-NUCLEO-IKS02A1 shield: Sensorhub (Mode 2) sample |
| ################################################## |
| |
| Overview |
| ******** |
| This sample is provided as an example to test the X-NUCLEO-IKS02A1 shield |
| configured in Sensor Hub mode (Mode 2). |
| Please refer to :ref:`x-nucleo-iks02a1` for more info on this configuration. |
| |
| This sample enables IIS2DLPC and ISM330DHCX sensors. Since all other shield |
| devices are connected to ISM330DHCX, the ISM330DHCX driver is configured in sensorhub |
| mode (CONFIG_ISM330DHCX_SENSORHUB=y) with the IIS2MDC magnetometer as external |
| slave. |
| |
| Then sensor data are displayed periodically |
| |
| - IIS2DLPC 3-Axis acceleration |
| - ISM330DHCX 6-Axis acceleration and angular velocity |
| - ISM330DHCX (from IIS2MDC) 3-Axis magnetic field intensity |
| |
| |
| Requirements |
| ************ |
| |
| This sample communicates over I2C with the X-NUCLEO-IKS02A1 shield |
| stacked on a board with an Arduino connector. The board's I2C must be |
| configured for the I2C Arduino connector (both for pin muxing |
| and devicetree). See for example the :ref:`nucleo_f401re_board` board |
| source code: |
| |
| - :zephyr_file:`boards/arm/nucleo_f401re/nucleo_f401re.dts` |
| - :zephyr_file:`boards/arm/nucleo_f401re/pinmux.c` |
| |
| Please note that this sample can't be used with boards already supporting |
| one of the sensors available on the shield (such as disco_l475_iot1) |
| as sensors multiple instances are not supported. |
| |
| References |
| ********** |
| |
| - X-NUCLEO-IKS02A1: http://www.st.com/en/ecosystems/x-nucleo-iks02a1.html |
| |
| Building and Running |
| ******************** |
| |
| This sample runs with X-NUCLEO-IKS02A1 stacked on any board with a matching |
| Arduino connector. For this example, we use a :ref:`nucleo_f401re_board` board. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/shields/x_nucleo_iks02a1/sensorhub/ |
| :host-os: unix |
| :board: nucleo_f401re |
| :goals: build |
| :compact: |
| |
| Sample Output |
| ============= |
| |
| .. code-block:: console |
| |
| |
| X-NUCLEO-IKS02A1 sensor Mode 2 dashboard |
| |
| IIS2DLPC: Accel (m.s-2): x: 0.077, y: -0.766, z: 9.878 |
| ISM330DHCX: Accel (m.s-2): x: 0.383, y: -0.234, z: 9.763 |
| ISM330DHCX: GYro (dps): x: 0.004, y: 0.003, z: -0.005 |
| ISM330DHCX: Magn (gauss): x: 0.171, y: 0.225, z: -0.363 |
| 7:: iis2dlpc trig 1215 |
| 7:: ism330dhcx acc trig 2494 |
| 7:: ism330dhcx gyr trig 2494 |
| |
| <updated endlessly every 2 seconds> |