| Application implementing 802.15.4 "serial-radio" protocol. |
| |
| How to use: |
| |
| 1. Build and flash Zephyr application to Quark board with 802.15.4 radio, |
| at the moment CC2520 radio is supported. |
| 2. Connect board to Linux PC, /dev/ttyACM[number] should appear |
| 3. Run Contiki-based native border router (6lbr, native-router, etc) |
| Example for Contiki: |
| $ cd examples/ipv6/native-border-router |
| $ make |
| $ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64 |
| |
| Now you have Contiki native border router, simple web server should show some |
| 802.15.4 devices. Web server address is printed in the border-router output |
| screen: |
| ... |
| Server IPv6 addresses: |
| 0x62c5c0: =>fd01::212:4b00:531f:113a |
| ... |
| Go to http://[fd01::212:4b00:531f:113a]/ |
| |
| It shall show you Neighbors and Routes. |
| |
| PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands |
| to our device ;) |
| |
| $ sudo systemctl disable ModemManager.service |
