dts/bindings/clock/microchip,xec-pcr.yaml

# Copyright (c) 2021, Microchip Technology Inc.
# SPDX-License-Identifier: Apache-2.0

description: Microchip XEC Power Clock Reset and VBAT register (PCR)

compatible: "microchip,xec-pcr"

include: [clock-controller.yaml, pinctrl-device.yaml, base.yaml]

properties:
  reg:
    required: true

  core-clock-div:
    type: int
    required: true
    description: Divide 96 MHz PLL clock to produce Cortex-M4 core clock

  slow-clock-div:
    type: int
    description: |
      PWM and TACH clock domain divided down from 48 MHz AHB clock. The
      default value is 480 for 100 kHz.

  pll-32k-src:
    type: int
    required: true
    description: 32 KHz clock source for PLL

  periph-32k-src:
    type: int
    required: true
    description: 32 KHz clock source for peripherals

  xtal-single-ended:
    type: boolean
    description: Use single ended crystal connection to XTAL2 pin.

  clk32kmon-period-min:
    type: int
    required: true
    description: |
      32KHz clock monitor minimum valid 32KHz period in 48MHz units

  clk32kmon-period-max:
    type: int
    required: true
    description: |
      32KHz clock monitor maximum valid 32KHz period in 48MHz units

  clk32kmon-duty-cycle-var-max:
    type: int
    required: true
    description: |
      Maximum duty cycle variation. Difference in units of 48HMz between
      the measured 32KHz high and low pulse widths.

  clk32kmon-valid-min:
    type: int
    required: true
    description: |
      Mininum number of consecutive 32KHz pulses that pass all monitor tests

  xtal-enable-delay-ms:
    type: int
    required: true
    default: 300
    description: |
      Delay in milliseconds after crystal is enabled and clock monitor is
      started.

  pll-lock-timeout-ms:
    type: int
    required: true
    default: 30
    description: |
      Timeout in milliseconds waiting for PLL to lock to new clock source.

  clkmon-bypass:
    type: boolean
    description: Bypass clkmon check of crystal or XTAL2 single-ended clock.

  internal-osc-disable:
    type: boolean
    description: |
      If the internal silicon 32KHz oscillator is not chosen as the source
      for PLL and Periheral devices then disable the internal 32KHz
      oscillator to save power.

  pinctrl-0:
    required: true

  pinctrl-names:
    required: true

  "#clock-cells":
    const: 2

clock-cells:
  - regidx
  - bitpos