blob: 6a7b92f4b27d0049d5f1cd5576af3c2a25f94eff [file] [log] [blame]
# Copyright (c) 2019, Manivannan Sadhasivam
# Copyright (c) 2020, Grinn
# SPDX-License-Identifier: Apache-2.0
include: spi-device.yaml
properties:
reset-gpios:
type: phandle-array
required: true
description: |
GPIO connected to the modem's RESET/NRESET signal.
This signal is open-drain, active-high (SX1272/3) or
active-low (SX1276/7/8/9) as interpreted by the modem.
dio-gpios:
type: phandle-array
required: true
description: |
Up to six pins that produce service interrupts from the modem.
These signals are normally active-high.
power-amplifier-output:
type: string
description: |
Selects power amplifier output pin. This is required when neither
'rfo-enable-gpios' nor 'pa-boost-enable-gpios' is specified. In other
case this property is simply ignored.
enum:
- "rfo"
- "pa-boost"
antenna-enable-gpios:
type: phandle-array
description: |
Antenna power enable pin.
rfi-enable-gpios:
type: phandle-array
description: |
RFI antenna input enable pin.
rfo-enable-gpios:
type: phandle-array
description: |
RFO antenna output enable pin.
pa-boost-enable-gpios:
type: phandle-array
description: |
PA_BOOST antenna output enable pin.
tcxo-power-gpios:
type: phandle-array
description: |
TCXO power enable pin.
tcxo-power-startup-delay-ms:
type: int
description: |
Delay which has to be applied after enabling TCXO power.