blob: 0e6554502d6813bf55207ddfee44053ac099f0c2 [file] [log] [blame]
# Copyright (c) 2022 STMicroelectronics
# SPDX-License-Identifier: Apache-2.0
description: |
STM32 OSPI device representation. Enabling a stm32 octospi node in a board
description would typically requires this:
&octospi {
pinctrl-0 = <&octospi_clk_pe9 &octospi_ncs_pe10 &octospi_dqs_pe11
&octospi_io0_pe12 &octospi_io1_pe13
&octospi_io2_pe14 &octospi_io3_pe15
&octospi_io4_pe16 &octospi_io5_pe17
&octospi_io6_pe18 &octospi_io7_pe19>;
dmas = <&dma1 5 41 0x10000>;
dma-names = "tx_rx";
status = "okay";
};
compatible: "st,stm32-ospi"
include: [base.yaml, pinctrl-device.yaml]
bus: ospi
properties:
reg:
required: true
interrupts:
required: true
pinctrl-0:
required: true
pinctrl-names:
required: true
clock-names:
required: true
dmas:
description: |
Optional DMA channel specifier, required for DMA transactions.
For example dmas for TX/RX on OSPI
dmas = <&dma1 5 41 0x10000>;
With, in each cell of the dmas specifier:
- &dma1: dma controller phandle
- 5: channel number (0 to Max-Channel minus 1). From 0 to 15 on stm32u5x.
- 41: slot number (request which could be given by the DMAMUX)
- 0x10000: channel configuration (only for srce/dest data size, priority)
Notes:
- On series supporting DMAMUX, the DMA phandle should be provided
but DMAMUX node should also be enabled in the DTS.
- For channel configuration, only the config bits priority and
periph/mem datasize are used. The periph/mem datasize must be equal,
0 is a correct value.
- There is no Fifo used by this DMA peripheral.
For example dmas for TX/RX on OSPI
dmas = <&dma1 5 41 0x10000>;
dma-names:
description: |
DMA channel name. If DMA should be used, expected value is "tx_rx".
For example
dma-names = "tx_rx";